Reebok JET100+ User manual

JET100+
USER MANUAL
(+ BLUETOOTH)

2. JET100+User Manual
A02 x1
C03 x1 D07 x1
E26 x4 E32 x8
E07 x2 E13 x6 E20 x9
C04 x1 C15 x1(left) C16 x1(right)
B04 x1 B05 x1 C01 x1
PARTS
PARTS LIST
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USING THIS TREADMILL. IT IS IMPORTANT YOUR TREADMILL RECEIVES
REGULAR MAINTENANCE TO PROLONG USE. FAILING TO REGULARLY MAINTAIN YOUR TREADMILL MAY VOID YOUR WARRANTY.
KEEP HANDS AWAY FROM ALL MOVING PARTS. NEVER OPERATE THE TREADMILL IF IT HAS A DAMAGED CORD OR PLUG.
KEEP THE CORD AWAY FROM HEATED SURFACES. WE SUGGEST THAT YOU CONSULT WITH YOUR PHYSICIAN OR HEALTH
PROFESSIONAL BEFORE USE OF THIS MACHINE, THIS APPLIES FOR THE AGES OF 35+ OR PEOPLE WITH HEALTH ISSUES.
WE TAKE NO RESPONSIBLITY FOR ANY INJURIES OCCURED IF YOU DO NOT FOLLOW OUR SAFETY GUIDELINES.
THIS TREADMILL SHOULD BE CAREFULLY ASSEMBLED. DO NOT TURN ON THE POWER BEFORE ASSEMBLY IS COMPLETE.
A02 - MAIN FRAME
B04 - SPANNER AND SCREW DRIVER
B05 - 5mm ALLEN KEY
C01 - CONSOLE BASE
C03 - CONSOLE BACK COVER
C04 - CONSOLE PANEL
C15 - LEFT UPRIGHT TUBE COVER
C16 - RIGHT UPRIGHT TUBE COVER
D07 - SAFETY KEY
E07 - BOLT
E13 - BOLT
E20 - BOLT
E26 - SCREW
E32 - LOCK WASHER

www.reebokfitness.com 3.
1
2
A02
E07
E13
E32
E07
A02
A06
E32
E13
E32
A07
E13 E07
E32
x2
x2
x4
TOOL REQUIRED
B05

4. JET100+User Manual
4
3
C04
E13
E20
E32
x5
x4
x4
x4
TOOL REQUIRED
C03
B05
E26
D05
D04
D05
D04
A06
E13 E13
E32
E13
E32
E32
A07
A-1
A-1
C04
C01
TOOL REQUIRED
B04
C04
C01
E20
C03
E26

www.reebokfitness.com 5.
5
6
C15
E20 x4
TOOL REQUIRED
C16
B04
E20
E20
E20
E20
C16
A02
C15
B12
B12
C04 D07

6. JET100+User Manual
FOLDING INSTRUCTIONS
A
A
B
B
A
A
4
2
3
1
MOVING YOUR MACHINE

www.reebokfitness.com 7.
LUBRICATION
SAFETY KEY
RUNNING
BELT
RUNNING
DECK
SILICONE OIL

8. JET100+User Manual
SAFETY PROCEDURES
0.6m
2m
1m 1m
ALLOW FOR A MINIMUM SPACE SHOWN BELOW
AROUND THE TREADMILL WHEN IN OPERATION. SERIAL NUMBER IS LOCATED ON THE FRONT BASE OF THE TREADMILL.
Example
THIS PRODUCT IS SUITABLE FOR USER’S
WEIGHT OF 110KG
110
kg
WWW.REEBOKFITNESS.INFO/PRODUCT-SUPPORT
Serial No. : 885652014816
Manufacture Date: July 2018
WEEE logo this symbol on a product means that the product is
covered by European Directive 2012/19/EU. Hereby, RFE international
declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.

www.reebokfitness.com 9.
B03
E02
E02 E09
E11
E32
E06
E36
E36
E03
A03
C37 C37
B06 B06
E36
E36
E32
A08
D19
E03
E05
E04 E33
E34
E12
E35
E13
E35
D20
E34
E15
E14
E35
E03
C14
E21
E21
E21
C18 C40
E10
E02
E10
E32
B01
E16 E31
C22
B02
E16
E16
E31
C17
C19
A02 E01
C36
C36
C35
C22
C34
C34
D21
C32
C33
E27
E18
E18
E18
E17
E17
E18
E21
D02
E21
E20
E20
C15
C16
E20
E20
E21
E21
E21
E01
C38
D14
D16
D15
E28
E06
C23
C23
C34
E20
E27
E27
E27
E27
E27
D30
E28
E26
B13
B14
B14
B13
E26 E26
E26
E21
E21
E21
E21
E21
E21
C23
E21
E21
E02
E02
E02
E02
E02
E02
B11
B11
B11
B11
B11
B11
E37
E37
E37
E37
E37
E37
C45
C44
E38
E38
C44 C45

10. JET100+User Manual
D04
D05
E19
E08
E02
C42
E19 C42
C43
C41
C39
E32
E19
A01
E08
D17
D08
D09
D09
D10
D18
D13
B05 B04
D11
D12
E07
E07
E13
E32
E32
E07
E07
E13E32 E13 E13
E32
A06 A07
E13E32
E32
A05
E26
E26
C09
C08
B09
E28 E26
A05
E26
C09
E28
D06
C08
B09
A04
E25
E25
E22
E22
E23
E23
C13
C10
C13
C10
E26
E26 E26
E26
E26
E26
E26 E26
E26
C03
C12
C11
C01
C07
C06
D22
E28
D22
E28
C27
C28
C29
E28
E22
E26 E26
E26
E26
C05
E26 C24
B10
E28
D23
D24
C25
E28
E28
E28
C04
B08
C20
E28
D01
D26
D27
D04
D03
D07
C02
C26 D25
E09
E35
E09
E35
E35
E13
E29
E29
E20
B12
D28 E21
D29
C21
E30
E22
E22

www.reebokfitness.com 11.
No. PART DESCRIPTION QTY No. PART DESCRIPTION QTY No. PART DESCRIPTION QTY
A01 base frame 1 C23 air cushion 4 D26 console panel sticker 1
A02 main frame 1 C24 safety key base 1 D27 function button sticker 1
A03 incline bracket 1 C25 volume control button 1 D28 filter 1
A04 console bracket 1 C26 base of volume control button 1 D29 inductance 1
A05 pulse bracket 2 C27 fan 1 D30 speed sensor 1
A06 left upright tube 1 C28 fan guide 1 E01 nut 2
A07 right upright tube 1 C29 fan axis 1 E02 nut 12
A08 motor bracket 1 C32 running belt 1 E03 nut 6
B01 front roller 1 C33 motor bottom cover 1 E04 bolt 1
B02 back roller 1 C34 black cushion 4 E05 bolt 1
B03 cylinder 1 C35 blue cushion 2 E06 bolt 4
B04 spanner and screw driver 1 C36 blue cushion 2 E07 bolt 4
B05 5mm allen key 1 C37 plastic pad 4 E08 bolt 2
B06 bushing 4 C38 motor belt 1 E09 bolt 5
B08 speaker net 1 C39 transport wheel 2 E10 bolt 2
B09 pulse steel plate 4 C40 adjustable wheel 2 E11 bolt 1
B10 spring plate 2 C41 ring-shape wire plug 2 E12 bolt 4
B11 side rail tighten sheet 6 C42 flat foot pad 4 E13 bolt 8
B12 locking pin 1 C43 cone-shape cushion 1 E14 bolt 1
B13 belt hook 2 C44 anti-slip pad 2 E15 bolt 1
B14 hide board 2 C45 sticker of anti-slip pad 2 E16 bolt 3
C01 console base 1 D01 computer board 1 E17 bolt 2
C02 console bottom cover 1 D02 control board 1 E18 bolt 6
C03 console back cover 1 D03 top signal wire 1 E19 bolt 4
C04 console panel 1 D04 middle signal wire 1 E20 bolt 11
C05 console panel bottom cover 1 D05 bottom signal wire 1 E21 bolt 21
C06 left water bottle holder 1 D06 pulse button 2 E22 screw 8
C07 right water bottle holder 1 D07 safety key 1 E23 screw 4
C08 pulse top cover 2 D08 ac single wire (blue) 1 E25 screw 2
C09 pulse bottom cover 2 D09 ac single wire (brown) 2 E26 screw 54
C10 handle bar 2 D10 ac single wire (brown 350mm) 1 E27 screw 23
C11 decoration strip i 1 D11 ac single wire (blue 350mm) 1 E28 screw 35
C12 decoration strip ii 1 D12 grounding wire 1 E29 screw 8
C13 handle bar decoration ring 2 D13 power wire 1 E30 screw 7
C14 motor top cover 1 D14 power socket 1 E31 washer 3
C15 left upright tube cover 1 D15 on-off button 1 E32 washer 14
C16 right upright tube cover 1 D16 overload protector 1 E33 washer 2
C14 motor top cover 1 D17 magnet ring 1 E34 spring washer 6
C15 left upright tube cover 1 D18 magnet core 1 E35 flat washer 11
C16 right upright tube cover 1 D19 incline motor 1 E36 big washer 8
C17 back end cover 1 D20 dc motor 1 E37 bolt 6
C18 left side rail 1 D21 running board 1 E38 screw 4
C19 right side rail 1 D22 speaker 2
C20 plastic holder 1 D23 audio board 1
C21 button board 1 D24 usb board 1
C22 cushion 2 D25 volume control board 1

12. JET100+User Manual
A J
K
L
M
N
O
P
Q
R
S
T
- DISTANCE - DISPLAYS
PROGRAM
B
C
D
E
F
G
H
I
- HEADPHONE INPUT

www.reebokfitness.com 13.
BUTTON OPERATION
PROGRAM
Selects the desired program (P1-P24, FAT)
MODE
Press this button to choose between time, distance or calories workout targets. You can press SPEED +/-
and INCLINE +/- to set the value, and press START to begin
START
Press this button at any time to start the machine
STOP
Press this button to either pause or stop the machine
SPEED+/-
• Increase/ decrease speed during workout
• Adjust Time, Distance and Calories
INCLINE+/-
• Increase/ Decrease incline during workout
• Adjust Time, Distance and Calories
INSTANT SPEED
Use this to select exact speed while running.
INSTANT INCLINE
Use this to select exact incline while running.
FAN
Use this to open / close the fan.
MP3 INPUT
Allows connection to personal MP3 player via supplied cable. Music will be played through built in
speakers and volume controlled via device and volume buttons on the console.
USB INPUT
• To charge a device via USB cable
• play Music via a USB stick
VOLUME + / NEXT
• mp3 input - Increase volume of music. Long press to increase volume. Short press to move to next song.
VOLUME - / PREVIOUS
• mp3 input - Decrease volume of music. Long press to reduce volume. Short press to move to previous
song.
SAFETY KEY
Included with this machine is a red safety key, the machine will not operate unless this is inserted. Its
purpose is to immediately stop the machine in the event of an emergency. The computer will display
“safety key disconnected” if not correctly attached to the treadmill. The clip on the other end of the safety
key must be attached to the user at all times during your workout to ensure the machine stops
immediately in the event of an emergency.

HANDLEBAR CONTROLS
SPEED+/-
• Increase / decrease speed during workout
• Adjust Time, Distance and Calories
INCLINE+/-
• Increase / Decrease incline during workout
• Adjust Time, Distance and Calories
PULSE GRIPS
There are pulse sensors located on both handlebars, in order to monitor the users pulse rate these can
be held in order for the reading to be given. The pulse monitor is a guide for reference only and not for
medical use or monitoring.
COMPUTER PROGRAMS
Manual Mode includes normal mode, time, calories and distance countdown mode.
P0 - Manual Mode
PI - P24 - Preset workout programs
Fat - Body fat functions
NORMAL MODE
1. From standby press START to begin manual mode immediately
2. Treadmill speed and incline can be manually adjusted by using the SPEED +/- or INCLINE +/- buttons at
any time during a workout
3. Press STOP/PAUSE button to stop the workout. The treadmill will go into cool down mode
4. Take out the SAFETY KEY to stop the working of the motor, or press STOP two times.
TIME, DISTANCE AND CALORIES COUNTDOWN MODE
1. From standby press MODE to select TIME, DISTANCE and CALORIES. Once selected use speed or
incline +/- to alter the required setting and press START to begin.
2. The TIME, DISTANCE or CALORIES will count down from the selection.
3. Once the countdown has completed the computer will beep to indicate the end of the program and
speed window will show “END” after 5 seconds the computer will beep and all the setting reset to zero.
P01-P24
These are preset programs in which the machines speed or incline will be changed automatically during
the workout.
Note: if speed/incline is altered by the user during these programs it will revert back to the preset speed/
incline at the next segment of the program.
1. From standby screen, Press PROGRAM button to select required program
2. Press START to select and begin using the preset time.
3. The default workout time for these programs is 10 minutes. This can be altered by pressing INCLINE +/-
buttons before START selected
4. During these programs the speed and incline settings are split into 10 segments. The time of each
segment depends on the overall time selected. For example a 10 minute program = 10 segments of 1
minute. Therefore the speed/incline would alter every 1 minute. Times will differ to allow for warm up and
cool down.
5. The console will count down and beep for 3 seconds each time the speed/incline is changed.
14. JET100+User Manual

BODY FAT FUNCTION
1. Press PROGRAM button untill body fat function displayes in the TIME DISPLAY
2. Press MODE button to enter the BODY FAT FUNCTION
3. The TIME window will display the preset program (F1-F5), DISTANCE window will display the input data
4. Press +/- to change the input parameters.
5. Press MODE to confirm
F-1 Sex 01 male - 02 female
F-2 Age 10 - 99
F-3 Height 100 - 200CM (40-80 INCH)
F-4 Weight 20 - 150KG (44-330LB)
6. F5 will be displayed. At this stage the user information has been stored . Place both hands on the pulse
sensors for approximately 5-10 seconds. The test results will then be displayed as below.
<19 Under weight
(20-25) Normal weight
(26-29) Overweight
>30 Obese
MPH to KPH conversion
The Speed and distance can be set to operate in MPH and KPH
To switch between these.
1. In standby mode, insert SAFETY KEY, Press SPEED+ and INCLINE+ for 5 seconds.
2. Speed will show "0.6" for MPH or "1.0" for KPH.
3. Repeat above process to change the speed again.
LUBRICATION REMIND FUNCTION
When the machine has completed 300km (188miles), the console will beep for every 10 seconds, and TIME
window will show OIL. This means that your treadmill needs to be lubricated with oil (this should be
completed every 6 weeks). To reset the console, hold STOP button for 3 seconds, the console will now
beep and reset.
www.reebokfitness.com 15.

CONNECT YOUR SMARTPHONE TO
YOUR NEW REEBOK EQUIPMENT
PLUG YOUR DONGLE INTO THE
BLUETOOTH USB PORT
SELECT GET STARTED & CHOOSE
FROM QUICK START, INTERVAL OR
MAP MY ROUTE
CONNECT TO YOUR MACHINE
DOWNLOAD:
Search ‘Reebok Fitness Equipment’ on the App Store or Google
CONNECT:
Your Reebok machine connects to the app via the
bluetooth dongle, so you don’t need GPS or
internet to use it.
The USB connector is colour coded blue to
match the correct USB port on your machine.
Once you have selected a workout or planned
your route, the app will ask you to choose the
machine you would like to connect with.
BLUETOOTH INSTRUCTIONS
16. JET100+User Manual

ZASUŇTE ADAPTÉR BLUETOOTH DO USB PORTU.
PŘIPOJTE CHYTRÝ TELEFON KE SVÉMU NOVÉMU
VYBAVENÍ REEBOK. Download: Vyhledejte ‘Reebok
Fitness Equipment’ vApp Store nebo Google Play.
ZVOLTE ZAČÍT & VYBRAT Z OKAMŽITÝ START, INTERVAL
NEBO MAPOVAT TRASU.
PŘIPOJTE KE SVÉMU ZAŘÍZENÍ.
BLUETOOTH USB にドングルを差し込んでくださ
い。
スマートフォンをあなたの新しいリーボック
器具に接続してください。 ダウンロード：アプリ
ストア、またはGoogle Play 上で ‘Reebok Fitness
Equipment’ （リーボック フィットネス器具）を検索
してください。
スタートを選択し、QUICK START ,INTERVAL または
MAP MY ROUTE から選んでください。
あなたのマシンに接続してください。
동글을 블루투스 USB 포트에 꽂으십시오.
스마트폰을 REEBOK 기구에 연결하세요.
다운로드: 앱 스토어나 구글 플레이에서 ‘Reebok
Fitness Equipment’를 검색하세요.
'시작하기'를 선택한 후 '빠른 시작'이나 '휴식', '나의 여
정 보기' 중에서 하나를 고르세요.
자신의 기기에 연결하세요.
将连接 U 盘插入蓝牙 USB 端口
将手机连接到新的 REEBOK 设备
下载：在 App Store 或 Google Play 中搜索“Reebok
Fitness Equipment”
选择“开始”并选择“快速开始”、“间隔”或“规划路线”
连接设备
أدخل جهاز "دونجل" إلى منفذ USB للبلوتوث
صلْ هاتفك الذكي بجهاز REEBOK الجديد
تنزيل: ابحث عن "أجهزة اللياقة من شركة Reebok" في App Store
أو Google Store.
حدد بدء، واختر من قائمة البدء السريع، استراحة أو حدد طريقي
أجرِ التوصيل بجهازك
SÆT DONGLEN IND I BLUETOOTH USB-STIKKET.
FORBIND DIN SMARTPHONE MED DIT NYE REEBOK
UDSTYR. Download: Søg efter "Reebok Fitness
Equipment" i App Store eller Google Play.
VÆLG GET STARTED OG VÆLG MELLEM KVIKSTART,
INTERVAL ELLER KORTLÆG MIN RUTE.
FORBIND MED DIN MASKINE.
STECKEN SIE IHREN DONGLE IN DEN BLUETOOTH
USB ASCHLUSS.
VERBINDEN SIE IHR SMARTPHONE MIT IHREM
NEUEN REEBOK GERÄT. Download: Suchen Sie nach‚
Reebok Fitness Equipment‘ im App Store oder im
Google Play Store.
WÄHLEN SIE START AUS UND WÄHLEN SIE QUICK
START, INTERVALL ODER ROUTE PLANEN.
VERBINDEN SIE SICH MIT IHREM GERÄT.
INSERTE SU DONGLE EN EL PUERTO USB BLUETOOTH.
CONECTE SU SMARTPHONE AL NUEVO EQUIPO
REEBOK. Descargar: Busque "Reebok Fitness
Equipment" en la App Store o en Google Play.
SELECCIONE COMENZAR Y ELIJA ENTRE INICIO RÁPIDO,
ENTRENAMIENTO DE INTERVALOS O TRAZAR MI RUTA.
CONÉCTESE A LA MÁQUINA.
LIGUE O SEU DONGLE NA PORTA USB BLUETOOTH.
LIGUE O SEU SMARTPHONE AO NOVO EQUIPAMENTO
REEBOK. Download: Procure por “Reebok Fitness
Equipment” na App Store ou Google Play.
SELECIONE “COMEÇAR” ESCOLHA ENTRE AS
OPÇÕES INÍCIO RÁPIDO, INTERVALO OU MAPEAR A
MINHA ROTA.
LIGUE À SUA MÁQUINA.
ВСТАВЬТЕ ДОНГЛ В BLUETOOTH USB-ПОРТ
УСТАНОВИТЕ СОЕДИНЕНИЕ ВАШЕГО СМАРТФОНА
С ВАШИМ НОВЫМ ОБОРУДОВАНИЕМ REEBOK.
Загрузить: Найдите «Reebok Fitness Equipment»
в магазине приложений App Store или в Google
Play.
ВЫБЕРИТЕ GET STARTED & ВЫБЕРИТЕ QUICK START,
INTERVAL ИЛИ MAP MY ROUTE.
УСТАНОВИТЕ СОЕДИНЕНИЕ C ВАШИМ
ТРЕНАЖЕРОМ.
INSÉREZ LA CLÉ DANS LE PORT USB BLUETOOTH
CONNECTEZ VOTRE SMARTPHONE À VOTRE NOUVEL
ÉQUIPEMENT REEBOK. Téléchargement: cherchez
'Reebok Fitness Equipment' sur l'App Store ou Google
Play.
SÉLECTIONNEZ DÉBUTER & CHOISISSEZ DÉMARRAGE
RAPIDE, INTERVALLE OU CARTOGRAPHIER MON
ITINÉRAIRE
CONNEXION À VOTRE MACHINE.
www.reebokfitness.com 17.

A J
K
L
M
N
O
P
Q
R
S
T
B
C
D
E
F
G
H
I
18. JET100+User Manual
- HEADPHONE INPUT (VSTUP PRO

FUNKCE TLAČÍTEK
PROGRAM
Volba požadovaného programu (P1-P24, FEDT)
MODE (REŽIM)
Volba Času, Vzdálenosti a Kalorií
START
Spuštění programu
STOP (ZASTAVIT)
Zastavení stroje kdykoli během cvičení. Běžecký pás zpomalí a poté se zcela zastaví. Všechna data se
vynulují.
SPEED + / - (RYCHLOST+/-)
• Zvýšení/snížení rychlosti během cvičení
• Nastavení Času, Vzdálenosti, Kalorií
INCLINE + / - (STOUPÁNÍ+/-)
• Zvýšení/Snížení stoupání během cvičení
• Nastavení času, Vzdálenosti, Kalorií
INSTANT SPEED (OKAMŽITÁ RYCHLOST)
Volba přesné rychlosti při běhu.
INSTANT INCLINE (OKAMŽITÉ STOUPÁNÍ)
Volba přesného stoupání při běhu.
FAN (VENTILÁTOR)
Otevření/Zavření ventilátoru.
MP3 INPUT (VSTUP PRO MP3)
Umožňuje připojení MP3 přehrávače pomocí přiloženého kabelu. Hudba bude hrát přes vestavěné
reproduktory a hlasitost je možné ovládat pomocí zařízení a tlačítek ovládání hlasitosti na konzoli.
USB INPUT (VSTUP PRO USB)
• Pro nabíjení zařízení pomocí USB kabelu
• Pro přehrávání hudby z USB flash disku
VOLUME + / NEXT (HLASITOST + / DALŠÍ SKLADBA)
• Pro vstup mp3 - zvýšení hlasitosti přehrávání. Dlouhým stisknutím zvýšíte hlasitost. Krátkým stisknutím
přejdete na další píseň.
VOLUME - / PREVIOUS (HLASITOST - / PŘEDCHOZÍ SKLADBA)
• Pro vstup mp3 - zvýšení hlasitosti přehrávání. Dlouhým stisknutím snížíte hlasitost. Krátkým stisknutím
přejdete na předchozí píseň.
SAFETY KEY (BEZPEČNOSTNÍ KLÍČ)
Součástí stroje je červený bezpečnostní klíč. Stroj nebude fungovat, dokud tento klíč nebude vložen. Jeho
účelem je okamžité zastavení stroje v případě nouze. Pokud není klíč správně vložen, počítač zobrazí
hlášku „bezpečnostní klíč odpojen”. Spona na druhém konci klíče musí být během tréninku po celou dobu
vždy upevněna k uživateli, aby bylo zajištěno, že se stroj v případě nouze zastaví.
www.reebokfitness.com 19.

KONTROLELEMENTER PÅ HÅNDTAGET
SPEED + / - (HASTIGHED +/-)
• Øg/reducer hastigheden under træningen
• Juster tid, distance og kalorier
INCLINE + / - (HÆLDNING +/-)
• Øg/reducer hældningen under træningen
• Juster tid, distance og kalorier
PULSMÅLEHÅNDTAG
På begge håndtag findes pulssensorer. Brugere kan holde på disse for at få overvåget og aflæst deres
puls. Pulsovervågning er udelukkende vejledende og ikke til medicinsk brug eller tilsyn.
COMPUTERPROGRAMMER
Manual tilstand inkluderer normal tilstand, nedtælling af tid, kalorier og distance.
P0 - Manuel tilstand
Pl - P24 - Forudindstillede træningsprogrammer
Fedt - Kropstedtfunktioner
NORMAL TILSTAND
1. Tryk på START fra standbyskærmbilledet for at starte manuel tilstand med det samme.
2. Løbebåndets hastighed og hældning kan til enhver tid under træningen justeres manuelt ved hjælp af
knapperne SPEED +/- (HASTIGHED +/-) eller INCLINE +/- (HÆLDNING +/-).
3. Tryk på knappen STOP for at standse træningen. Løbebåndet starter tilstanden nedkøling.
4. Tag SIKKERHEDSNØGLEN ud for at standse motoren, eller tryk to gange på STOP.
Nedtælling af tid, distance og kalorier
1. Tryk på MODE (TILSTAND) fra standbyskærmbilledet for at vælge TIME (TID), DISTANCE og CALORIES
(KALORIER) Når det er valgt, skal du bruge lncline +/- (Hældning +/-) for at ændre de krævede indstillinger,
og tryk på START for at begynde.
2. TIME (TID), DISTANCE eller CALORIES (KALORIER) tæller ned fra valget.
3. Når nedtællingen er slut, bipper computeren for at angive, at programmet er slut, og "ENO" ("SLUT")v ises
i hastighedsvinduet. Computeren bipper efter 5 sekunder, og alle indstillinger nulstilles.
P01-P24
Disse er forudindstillede programmer, hvor maskinens hastighed eller hældning ændres automatisk under
træningen.
Bemærk:hvisbrugerenændrerhastighed hældningunderdisseprogrammer,
venderprogrammettilbagetildenforudindstillede hastighed/hældning ved næste segment i programmet.
1. Tryk på knappen PROGRAM fra standbyskærmbilledet for at vælge det krævede program, eller brug
SPEED+/(HASTIGHED +/-) til at vælge program under træningen.
2. Tryk på START for at vælge og begynde den forudindstillede tid.
3. Som standard er træningstiden for disse programmer 10 minutter. Dette kan ændres ved at trykke på
knapperne INCLINE +/-(HÆLDNING+/-), før START vælges.
20. JET100+User Manual