4. Warning
• While changing batteries, with the anode towards “ ”
• TV200 has no memory function. To keep the record, please write it down.
• Test points should be chosen at the bearing, bearing support or other structure components that
show the vibration characteristics explicitly.
• If it is possible, the best choice to know the vibration characteristic is measuring in three
perpendicular directions.
• To keep the sensor in contact with the plane being tested close, pressure should between 5N and
20N. Also, the pen should be perpendicular to the plane.
5. Repair
If any trouble occurs, user should not try to dismantle and repair it. REED Instruments can repair
this
instrument
for
you.
For
information
contact
us
at
[email protected].
When
shipping
this product include the warranty card and the specimen provided and a statement explaining the
problem (Excluding the non-warranty parts (see below).
Please keep in touch with the marketing department of our company or our sales agents.
6. Non-warranty parts
• Sheath
• Transducer
• Battery
• Accessories