
Congratulations on the purchase of your new Compact Lite Aluminium
Wheelchair. Equipped with several features and accessory choices you are
sure to enjoy the benefits of this chair.
Please follow these simple steps to assemble your wheelchair –
1. With the chair upright, pull each legrest out and down into ‘C’ cup
locator. Footplate height can be adjusted using the allen key
provided.
2. Push down on the sides of the seat until it clamps into position.
3. Lift backrest up to click into position. Depress black latch to fold.
4. Armrests flip back to enable closer position to table / desk.
5. Care-assist hand brake, provides added security to the person
pushing the chair. When the wheelchair is stationary, the hand brake
at the wheel should be applied for added security. To apply push
forward, to release pull back.
6. Anti-tip wheels can also be fitted to this chair, they provide safety
when the user is ascending ramps and steep inclines, preventing the
wheelchair from tipping backward. If not required they can be
adjusted up.