Step 1: Place seat face down on level
surface, locate the leg supports
diagonally across each other with the
two shorter screws/washers at the
front of the seat. Place the ‘U’
shaped backrest bracket to the back
and secure with 3 longer
screws/washers. Fig1
Step 2: Attach the ‘L’ shaped tubes to
the backrest with 4 shorter
screws/washers. (Push button used
to locate backrest under seat). Fig2
Step 3: Locate legs to frame, securing
in position with push pin. Fig3
Step 4: Locate backrest to underside
of chair locating in position with push
pins.
Step 5: With chair upright insert
armrests each side of seat ensuring
they are secured in place with push
pins.
Step 6: Use push buttons and
numbered holes to adjust the stool
to the desired seat height. Be sure
the stool height is level, stable and all
push pins are fully engaged before
use.