Reison MIX 10-307 User manual

1
Radial clamp MIX 10-307 including versions
Version
Description
Pole type
10-307
Clamp (EU 25x10 mm rail) with V-stud
10-307-P
Clamp (EU 25x10 mm rail) with plane stud
10-307-UK
Clamp (UK 1¼ ” x ¼ ” rail) with V-stud
10-307-UK-P
Clamp (UK 1¼ ” x ¼ ” rail) with plane stud
10-307-US
Clamp (US 1⅛ ’’ x ⅜ ’’ rail) with V-stud
10-307-US-P
Clamp (US 1⅛ ’’ x ⅜ ’’ rail) with plane stud
10-307-AUSTRALIA
Clamp (AUSTRALIA 1½’’ x ¼ ’’ rail) with V-stud
Warning! This symbol indicates important information related to safety. Follow these
instructions carefully.
Read User Manual before use! It is important to fully understand the content of the user
manual before attempting to use the equipment.
2021-03-08
Document number: M10-307EN rev.01
Radial clamp MIX 10-307
ENGLISH

2
Intended use
Clamp intended to attach and position accessories, with a pole size Ø 16-20 mm, to the accessory rail
on operating and examination tables. The product is to be used by medical professionals within a
medical facility.
Safety regulation
Maximum load: 10 kg inward load over the OR-table and 20 kg outward load away from the OR-table,
according to EN 60601-1 and EN 60601-2.
Before use, ensure correct function!
When loosening the lock lever to adjust the height, support the accessory, to prevent it from
uncontrolled descend into the bottom position.
Service and preventive maintenance shall be performed by authorized personnel.
MAX 10 kg
MAX 20 kg

3
User instruction
Installation
Usage
A.
B.
90o
A.
B.

4
Maintenance
Service, preventive maintenance, adjustment and repair shall be performed by authorized personnel
only. Altering the construction without a written consent from the manufacturer, is strictly forbidden.
Cleaning
Clean with antiseptic detergent with pH 6 –8 and warm water. Ethanol can be used. Wipe dry with
soft cloth. Do not use strong acidic or alkaline detergent.
Control
Check that there are no loose parts and that there is no damage to any part. Check the clamp lock
function and the function for positioning and locking the accessory pole in the clamp.
Annual service
Once a year the clamp shall be carefully cleaned, moving parts shall be lubricated, the locking function
shall be tested

5
Spare parts
Version:
10-307
10-307-P
10-307-UK
10-307-UK-P
10-307-US
10-307-US-P
10-307-
AUSTRALIA
Description
Pcs.
Article no.
Article no.
Article no.
Article no.
Article no.
Article no.
Article no.
1.
House
1
10031
10031
10543
10543
10547
10547
10973
2.
Skruv MC6S 6x30 FZB
2
-
-
-
-
-
-
-
3.
Gear plate
1
10486
10486
10486
10486
10486
10486
10486
4.
Guide
1
10320
10320
10320
10320
10320
10320
10320
5.
Stud
1
10325
10429
10325
10429
10325
10429
10325
6.
Locking handle
1
10603
10603
10603
10603
10603
10603
10603
7.
Gear cylinder
1
10316
10316
10316
10316
10316
10316
10316
8.
Shaft
1
10009
10009
10009
10009
10009
10009
10009
9.
Handle
1
10014
10014
10014
10014
10014
10014
10014
10.
Spring
1
10013
10013
10013
10013
10013
10013
10013
11.
Pressure pin
1
10012
10012
10012
10012
10012
10012
10012
12.
Plunger
1
10711
10711
10711
10711
10711
10711
10711
13.
Eccentric
1
11165
11165
11165
11165
11165
11165
11165
14.
Ball
1
K20M8S
K20M8S
K20M8S
K20M8S
K20M8S
K20M8S
K20M8S
15.
Washer DB 5x10x0,5
1
-
-
-
-
-
-
-
16.
Screw MT6SS 5x6 A2
2
-
-
-
-
-
-
-
17.
Screw MKFT 4x8 A2
1
-
-
-
-
-
-
-

6
Technical specification
Maximum workload
10 kg inward load over the OR-table and 20 kg outward load away from the
OR-table, according to EN 60601-1 and EN 60601-2.
Weight
1,1 kg
Material clamp
Stainless steel
Aluminum
Version
UDI-DI
Dimension
(H x W x L)
10-307
07350111830137
160 x 65 x 125 mm
10-307-P
07350111830151
160 x 65 x 125 mm
10-307-UK
07350111830168
160 x 65 x 125 mm
10-307-UK-P
07350111830175
160 x 65 x 125 mm
10-307-US
07350111830182
160 x 65 x 125 mm
10-307-US-P
07350111830199
160 x 65 x 125 mm
10-307-AUSTRALIA
07350111830144
166 x 65 x 125 mm

7
Reison Medical AB
Eriksbergsvägen 32A
734 92 Hallstahammar
SWEDEN
[phone] I[email protected] Iinf[email protected]