REIST INDUSTRIES RR48 Product manual

INNOVATION WORKING FOR YOU
RR48
48 Inch Roto-Rake
Operator and Parts Manual
REIST Industries Inc.
100 Union Street
Elmira, Ontario, Canada
N3B 3L7
Phone: [phone]
Fax: [phone]
Toll Free: 1-877-467-3478
www.reistindustries.com
Effective Serial Number X3841
to Y4400

Contents
INTRODUCTION......................................................................................................................... 2
PRODUCT CONFIGURATION ................................................................................................... 3
GENERAL SAFETY PRECAUTIONS ......................................................................................... 4
OPERATION AND TRANSPORTATION ON PUBLIC ROADS AND AREAS............................. 5
SAFETY DECALS....................................................................................................................... 6
MAINTENANCE.......................................................................................................................... 8
SETUP INSTRUCTIONS ............................................................................................................ 8
SKID-STEER HOOKUP INSTRUCTIONS............................................................................... 8
OPERATION OF ROTO-RAKE................................................................................................ 8
GROUND SPEED:................................................................................................................... 9
RR48 Parts................................................................................................................................ 10
RR48 MAIN ASSEMBLY........................................................................................................ 10
RR48 ROTO-ASSMBLY ........................................................................................................ 11
RR48 SCHEMATIC................................................................................................................ 12
RR48 WHEEL ASSEMBLY.................................................................................................... 13
RR48 MINI SKID STEER SWIVEL FRAME ASSEMBLY....................................................... 14
OPTIONAL SIDE CUTTERS - RRSCK..................................................................................... 15
OPTIONAL PLOW ATTACHMENT ASSEMBLY....................................................................... 16
WARRANTY INFORMATION.................................................................................................... 17
Record your product information for future reference:
Model Number: ______________
Serial Number: ______________
In Service Date: _____________
Sold By: ___________________

REIST Industries Inc. © 2014 (revised August 2022)
Page 2
INTRODUCTION
Thank you for choosing the REIST ROTO-RAKE.
We feel confident that this equipment will meet your expectations in workmanship, reliability and
performance when used as designed. This manual is to assist you with the safe operation of the
REIST ROTO-RAKE. It also has a parts list to help you when replacement parts are required.
Any person who will be assembling, attaching, maintaining, or operating this product and the
prime mover to which it is attached, are required to read and completely understand the
information and instructions contained in this manual and that of the prime mover. Always
obtain further assistance by contacting the dealer from which this product was purchased or by
contacting REIST Industries at the telephone number or address below. Keep this manual
available for reference whenever this product is being handled or used and we recommend that
it is reviewed periodically and before seasonal use. Provide this manual to any new owners
and/or operators and ensure they fully understand the safe operation of this equipment before it
is placed in service.
Replacement copies of this manual are available for downloading at:
www.reistindustries.com
Innovation Working for You
REIST Industries Inc.
100 Union Street
Elmira, Ontario, Canada
N3B 3L7
Phone: [phone]
Fax: [phone]
Toll Free: 1-877-467-3478
The illustrations and information contained within this manual were current at the
time of publication. Under our policy of continuous improvement, we reserve the right
to change specifications and designs without prior notice. The illustrations do not
necessarily show the standard version of product offered by REIST Industries.

REIST Industries Inc. © 2014 (revised August 2022)
Page 3
PRODUCT CONFIGURATION
ROTO-RAKE RR48
Model
Working
Width
GPM
Max
PSI
Mount
Pounds
Kilograms
RR48
48”
10 to 20
3000
Mini Skid Steer
725
330
The following references are used throughout this Operator’s and Parts Manual:
Attachment,
Implement
Refers to the ROTO-RAKE whether attached or separate from the prime
mover
Prime Mover
The engine-driven machine to which this product is attached
Equipment
Refers to the Implement and or prime mover whether separate or
connected
WARNING,
DANGER,
IMPORTANT
A notice that relates to the safe and efficient operation of the ROTO-
RAKE or prime mover. Read and understand the reference before
attaching or operating the ROTO-RAKE or the prime mover.
Exceeding the recommended specifications can result in damage to the equipment
and will void all REIST Industries warranties.

REIST Industries Inc. © 2014 (revised August 2022)
Page 4
GENERAL SAFETY PRECAUTIONS
Careful operation is the best assurance against accidents. It is the owner’s responsibility to
make sure that all operators read and understand this manual and follow the recommendations,
cautions and warnings before connecting to a prime mover and operating the equipment. The
REIST ROTO-RAKE was designed for use to grade and level all types of soil including stone
dust, gravel or similar products.
Familiarize yourself with all controls and know how to quickly stop the equipment and all
rotating parts in the case of an emergency.
Never let an untrained person or a child operate equipment.
DO NOT MODIFY THE ROTO-RAKE OR PRIME MOVER
Modifications may weaken the integrity of the ROTO-RAKE and may impair the
operation, safety, and performance of the product. When making repairs, only
qualified technicians using the manufacturer’s genuine parts, following authorized
instructions, shall attempt the repair. Never modify any ROPS (Roll Over Protection
Structure) or FOPS (Falling Object Protective Structure) equipment or other safety
device or remove guarding. Any modifications must be sanctioned in writing by an
authorized representative of the manufacturer.
MAINTAIN AND REPAIR EQUIPMENT SAFELY
•Do not wear loose clothing, or any accessories that can catch in moving parts
•If you have long hair, cover or secure it so that it does not become entangled
in the equipment
•Work on a level surface in a well-lit area.
•Always lower raised equipment to the ground or securely support it to prevent
unintentional movement
•Remove and retain the prime mover’s ignition key
•Use the correct tool for the job at hand. Make sure they are in good condition
for the task required
•Wear the protective equipment specified by the tool manufacturer
•Use care when working on hydraulic systems and understand how to check
for and release trapped hydraulic pressure

REIST Industries Inc. © 2014 (revised August 2022)
Page 5
Never use your hands to clear if clogged. Never allow anyone to reach into the rotor housing.
The rotor can crush and/or dismember. Keep everyone clear of the rotor until the prime mover
engine is off and the hydraulic pressure has been relieved.
OPERATION AND TRANSPORTATION ON PUBLIC ROADS AND
AREAS
Always adhere to the local laws and regulations concerning traveling or operating on public
roadways and areas. Clean all lights, reflectors and mirrors ensuring that all lighting is in
working order before moving. Know the area! i.e. Elevations, steep side drop offs. Watch out for
pedestrians and use caution when approaching pedestrians, hazardous objects (stones, etc.)
may inadvertently be discharged. Always be alert while transporting or operating the equipment.
Select a safe ground speed when transporting from one area to another. When operating, or
driving on roadways, travel in such a way that faster moving vehicles may pass you safely.
STAY CLEAR OF ROTATING OBJECTS
Keep hands, feet and clothing away from power driven rotating parts.

REIST Industries Inc. © 2014 (revised August 2022)
Page 6
SAFETY DECALS
Contact REIST Industries if replacement safety signs are required.
DECAL PART NUMBERS
Item Part Number Description
WD114 Drive Line Decal
Serial Serial Number Decal
WD111 WARNING Rotating Knives & Spikes
WD112 Read Manual Decal
RD107 REIST Decal
RD115 Made in Canada Decal
WD116 Flying Objects Decal

REIST Industries Inc. © 2014 (revised August 2022)
Page 7
•Do not operate an engine in confined or non-ventilated area
•Do not perform adjustments or repairs with the engine running
•Always lower raised equipment to the ground or securely support it to prevent
unintentional movement
•Do not operate on excessive inclines or side slopes –know the limitations of the prime
mover –be careful when turning on slopes as a rollover condition may exist
•Never carry passengers
•Keep bystanders away from the machine when in operation
•Be aware of pedestrians
•Know how to quickly stop the equipment and all rotating parts in the case of an
emergency
•Stop the prime mover, lower implements and turn off the engine before dismounting
•Refer to the prime mover’s Operator’s Manual for additional information
READ OPERATOR’S MANUAL BEFORE OPERATING
Do not operate equipment until you are completely trained by a qualified operator in
how to use the controls, understand the machine’s capabilities, dimensions, and all
safety requirements. Refer to your operator’s manual for these instructions.

REIST Industries Inc. © 2014 (revised August 2022)
Page 8
MAINTENANCE
Refer to the General Safety Precautions, page 4 of this manual before performing any
maintenance.
1. Always ensure the ROTO-RAKE is properly installed, the prime mover is positioned
on a level surface with the park brake set and the ROTO-RAKE positioned on the
ground
2. Shut-off the engine and remove and retain the ignition key
3. Chock the wheels to prevent movement and release residual hydraulic pressure
4. Grease hinge points every 50 hrs.
5. At the beginning of each season, ensure that all fasteners are properly torqued, all
safety guards are in place and that operator’s manual is reviewed and understood
6. At the end of season, perform all maintenance activities protect exposed hose ends.
Always check for missing or damaged parts and repair as required
SETUP INSTRUCTIONS
Improper installation, operation, or maintenance of this equipment could result in serious injury
or death. FOLLOW ALL SAFETY INSTRUCTIONS IN THIS MANUAL AND THE PRIME
MOVER'S MANUAL(S).
Refer to the operator’s manual(s) for your prime mover and follow the mounting instructions
contained therein.
SKID-STEER HOOKUP INSTRUCTIONS
The standard 48” ROTO-Rake has a Mini Skid Steer mount. Attach Skid steer to Roto-Rake
and attach the two Hydraulic hoses. Different makes of skid steers have different wiring
configurations. You might have to rewire or get a convertor plug from your skid steer dealer.
OPERATION OF ROTO-RAKE
•Be sure the area is clear of all bystanders
•Refer to the prime mover starting instructions
•Lower ROTO-RAKE to ground, putting skid steer arms in float position.
•For leveling control, you want the weight on the wheels of the Roto-Rake
•Tip the bucket cylinders of the skid steer until tips of rotor are at desired depth.
STAY CLEAR OF ROTATING OBJECTS
Keep hands, feet and clothing away from power driven rotating parts.