Remaco PLT-412 User manual

Warning Caution with main supply and live wires. Install with qualified technician or trained
personnel.
Installation Guide
(PLT-412)
C
Ceiling Suspension
Ceiling Mount
Important Note
Do not adjust the Upper Limit of the lift higher than the original factory
preset position.
If adjusted, the lift will move into the frame and be stopped by force
and not the Upper Limit Switch. This will cause overheating of the
motor, rendering the lift to being unable to operate properly.
-
+
-
+
Adjust “ -” : Less lift retraction
Adjust “ +” : More lift retraction
Adjust “ -“ : Less lift drop
Adjust “ +“ : More lift drop
Front
View
Upper Limit
Lower Limit
Allen Key
51.00 cm
10m
5.0 c
8.00 cm
4.50 cm
A) Drill Dia. 10mm holes to a depth of 35mm.
(Note: Do not drill too deep)
B) Insert M8 anchor into the hole.
C) Use pin punch to expand the anchor.
Adjustable
7 cm to
138 cm
Hammer
Pin Punch
M8 Anchor
10mm Drill
Power Drill
35
Website: www.remacotech.com
COPYRIGHTS 1998 REMACO TECHNOLOGIES PTE LTD
Wall
Swtich
D) Connection of all cables to the
MPC-850 (Refer to Installation
Guide for MPC-850)
Types of Installation Mount
Steps for Installation
Step 1
Step 2
Step 3
Step 4
PLT
V: 1.0
PLT-412
All connections
are to the MPC
Connect
to the MPC
MPC
For connection details,
please refer to the
Installation Guide
provided
Important Note
MPC
Sensor
UP
DOWN
ScreenInfrared Remote
(4-ChannelControl)
STOP
UP
DOWN
STOP
UP
DOWN
STOP
UP
DOWN
STOP
Ch1 Ch2 Ch3 Ch4
4-Channel
IR Remote
Projector
Projector Lift
Continue next page
FrontBack
FrontBack
12 x 4 Nos.
54.50 cm
55.00 cm
5. 0 cm
4 5
18.50 cm
Adjustable
20-32cm
Red Knob
M8 Threaded
(Optional)
8.00 cm

M5 Washer (2 nos.)
M5 x 12 Hex screw (2 nos.)
To be
mounted onto
PLT Base
M6 x 10
Hex Head Screw
(2 nos.)
Pan/tilt
swivel
Spider
hook
Mounting Screws for LCD/DLP Projector:
M3 x 12 Philip Screws (4 nos.)
M4 x 12 Philip Screws (4 nos.)
M5 x 12 Philip Screws (4 nos.)
M3 washer (4 nos.)
M4 washer (4 nos.)
M5 washer (4 nos.)
Important Notes:
All spider brackets are thoroughly inspected and fully
tested operational in factory. We accept no liability
whatsoever for any losses due to improper operation,
or any unauthorized alternation. All trademarks contained
in this installation guide are the property of their respective owners.
M6 Nuts (2 nos.)
End
False Ceiling Support
M6 Threaded Rod
M6 Washer & Nut
Option 1
False Ceiling (Tile Ceiling Board)
M6 Threaded Rod
M6 Washer & Nut
Option 2
False Ceiling (Plastor Fiber Ceiling)Partition Screws
Wood or Board
(Not provided)
Projector Spider Bracket