Renault Media Nav Use and care manual

Media Nav
Updating the original maps on
your Media Nav

Updating the original maps on your Media Nav
Operations you’ll need to
carry out on your computer
Operations you’ll need to
carry out in your vehicle
hp://youtu.be/DUD3xq_Ea_4
Summary
01
Transferring the data from your Media Nav onto a
USB stick 3
02
Updating the maps 5
03
Checking that the maps have updated successfully 6

3/6
Updating the original maps on your Media Nav
01 Transferring the data from your Media Nav onto a USB stick
Change page using the change page arrow and
select “Map Update”.
Check that you are in “options” before continuing.
Select “NAVI”, then read and accept the safety
instructions.
The first thing you need to do is transfer the data
from your Media Nav onto a USB stick. You’ll need
an empty USB stick with at least 4 Gigabytes of
memory.
Insert the USB stick into your Media Nav and switch
it on.
01
Transferring the data from your Media Nav onto a USB stick

4/6
Updating the original maps on your Media Nav
01 Transferring the data from your Media Nav onto a USB stick
Once you’ve retrieved the data from your device,
connect to Toolbox again and it will recognise your
Media Nav.
The message “Are you ready to start collecting device
information?” will appear. Select “Yes”.
The message “Soware Update” will appear along
with a progress bar. Wait for the update to finish – it’s
essential that you don’t remove the USB stick while
the update is still running.
Once the update is complete, press “OK” and remove
the USB stick.
And choose “Update”. Now wait for a few seconds.
Press “Options”,

5/6
Updating the original maps on your Media Nav
02 Updating the maps
Then return to your vehicle, insert the USB stick, and
start the engine and Media Nav.
We recommend that you keep the ignition on
throughout the operation.
Your Media Nav will automatically ask if you’d like to
install the update. To start the update, follow the on-
screen instructions.
Your update has installed successfully.
Wait until you see the message “your device is up to
date” before removing safely the USB stick.
Click “install” to start downloading.
There’s a progress bar that allows you to monitor the
download.
Large maps can take quite a while to update, so we’d
suggest that you check your computer won’t go into
sleep or power-save mode while the update is in
progress.
Once the download is complete, please confirm.
If your Media Nav system is up to date you’ll be able
to access the “updates” menu. If there’s a map update
available, you can download it.
02
Updating the maps

6/6
Updating the original maps on your Media Nav
03 Checking that the maps have updated successfully
and “Maps”.
You’ll see the map that you downloaded.
Change page using the change page arrow and
select “Map Update”
Check that you are in “options” before continuing.
Once the update is complete you’ll be able to check
whether the installation worked properly. From the
home screen, press “NAVI”,
03
Checking that the maps have updated successfully