Renesas R0E424270CFLE0 User manual

User’s Manual
REJ10J2099-0200
R0E424270CFLE0 Rev.2.00
Apr 16, 2010
Converter Board for Connecting H8S/2400 Series 120-pin 0.4mm pitch LQFP
1. Outline
REJ10J2099-0200 Rev.2.00 Page 1 of 4
Apr 16, 2010
The R0E424270CFLE0 is a converter board for connecting the
flexible cable R0E001000FLX10 to a foot pattern for 120-pin
0.4mm pitch LQFP (PLQP0120LA-A).
2. Package Components (See Figure 1)
Check to see if the R0E424270CFLE0 package has all the
following contents before using this product.
(1) R0E424270CFLE0 converter board............................ 1 pc.
(2) YQPACK120SE (made by Tokyo Eletech Corporation) ................ 1 pc.
(3) NQPACK120SE-ND (made by Tokyo Eletech Corporation) ....... 1 pc.
(4) YQ-GUIDE (made by Tokyo Eletech Corporation) .....................4 pcs.
(5) R0E424270CFLE0 User's Manual (this manual)
3. Specifications
Table 1 Specifications
Applicable package PLQP0120LA-A
(120-pin 0.4mm pitch LQFP)
Insertion/removal
iterations of connector 50 times guaranteed
4. Usage (See Figure 2)
The R0E424270CFLE0 can be used for debugging and
on-board evaluation in common by mounting the
NQPACK120SE-ND on the user system.
(1) For debugging
Mount the NQPACK120SE-ND on the foot pattern of the
user system and attach the YQPACK120SE on it. In
addition, connect the R0E424270CFLE0 to the
YQPACK120SE, and then connect the flexible cable
R0E001000FLX10 of the emulator to the upper connector
of the R0E424270CFLE0.
(2) For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK120SE (not included) in order on
the NQPACK120SE-ND on the user system.
Before using the R0E424270CFLE0, be sure to read the
precautions on page 3.
Figure 1 Package components of the R0E424270CFLE0
●: No.1 pin
Be sure to align the pins.
120-pin 0.4mm pitch
(PLQP0120LA-A)
foot pattern
FLASH MCU, etc.
YQPACK120SE
NQPACK120SE-ND
YQ-GUIDE (×4)
HQPACK120SE
(not included)
R0E424270CFLE0
(2) For on-board
evaluation
(1) For debugging
Flexible cable
R0E001000FLX10
Figure 2 Usage of the R0E424270CFLE0
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, CSSOCKET, CSPLUG/W and
LSPACK are trademarks of Tok
y
o Eletech Cor
p
oration.

R0E424270CFLE0 User’s Manual
5. Connection Procedure (See Figure 3)
REJ10J2099-0200 Rev.2.00 Page 2 of 4
Apr 16, 2010
The procedure for connecting the R0E424270CFLE0 is shown
below.
(1) Mount the NQPACK120SE-ND on the user system.
(2) Attach the YQPACK120SE on the NQPACK120SE-ND.
(3) Secure the four corners of the YQPACK120SE with the
YQ-GUIDEs.
●Do NOT use the screws included with the
YQPACK120SE for fixing the YQPACK120SE.
●Do NOT use the screwdriver included with the
NQPACK120SE-ND for fixing the YQ-GUIDEs. That
is used only for the HQPACK120SE.
(4) Mount the R0E424270CFLE0 on the YQPACK120SE.
(5) Attach the flexible cable R0E001000FLX10 of the
emulator to the R0E424270CFLE0.
(1)
(2) (3)
(4)
(5)
Use a slotted screwdriver.
●: No.1 pin
Be sure to align the pins.
120-pin 0.4mm pitch
(PLQP0120LA-A)
foot pattern
NQPACK120SE-ND
YQPACK120SE
YQ-GUIDE (×4)
Flexible cable
R0E001000FLX10
R0E424270CFLE0
Figure 3 Connection procedure of the R0E424270CFLE0
6. External Dimensions and a Sample Foot Pattern
Unit: mm
35.00
6.00 6.00
7.50
7.50
13.00
17.00
0.4
0.2
CN1
1
50 51
100
CN2
1
5051
100
TP3
TP4
TP1
TP2
MADE IN JAPAN
Figure 4 External dimensions and a sample foot pattern of the R0E424270CFLE0

R0E424270CFLE0 User’s Manual
7. Precautions and WEEE Directive
CAUTION
Cautions to Be Taken for This Product:
zWhen connecting the YQPACK120SE, be sure to use the included YQ-GUIDEs.
zDo not use the screws included with the YQPACK120SE for connecting the YQPACK120SE.
IMPORTANT
Notes on This Product:
zWe cannot accept any request for repair.
zFor purchasing the NQPACK120SE-ND, YQPACK120SE and HQPACK120SE, contact the following:
Tokyo Eletech Corporation http://www.tetc.co.jp/e_index.htm
Disposal Instruction (This is only valid in the European Union.):
Renesas development tools and products are directly covered by the European Union's Waste Electrical and Electronic
Equipment, (WEEE), Directive 2002/96/EC. As a result, this equipment, including all accessories, must not be disposed
of as household waste but through your locally recognised recycling or disposal schemes. As part of our commitment to
environmental responsibility Renesas also offers to take back the equipment and has implemented a Tools Product
Recycling Program for customers in Europe. This allows you to return equipment to Renesas for disposal through our
approved Producer Compliance Scheme. To register for the program, click here “http://www.renesas.com/weee".
8. Correspondence of Connectors CN1 and CN2
Table 2 Correspondence of the connectors
CN1 Pin No. IC1 CN1 Pin No. IC1 CN2 Pin No. IC1 CN2 Pin No. IC1
1 - 100 - 1 - 100 -
2 - 99 - 2 - 99 -
3 - 98 - 3 - 98 -
4 - 97 - 4 - 97 -
5 63 96 62 5 - 96 89
6 64 95 61 6 - 95 90
7 65 94 60 7 - 94 91
8 66 93 59 8 - 93 92
9 67 92 58 9 - 92 93
10 68 91 57 10 - 91 94
11 - 90 56 11 - 90 95
12 - 89 55 12 - 89 96
13 - 88 54 13 - 88 97
14 69 87 53 14 - 87 98
15 - 86 - 15 - 86 -
16 70 85 52 16 - 85 99
17 71 84 51 17 88 84 100
18 72 83 - 18 87 83 101
19 73 82 50 19 86 82 102
20 74 81 - 20 85 81 -
21 75 80 - 21 84 80 -
22 76 79 49 22 83 79 -
23 77 78 48 23 82 78 -
24 78 77 47 24 81 77 103
25 79 76 46 25 80 76 104
26 - 75 - 26 - 75 -
27 13 74 45 27 12 74 -
28 14 73 44 28 11 73 -
29 15 72 43 29 10 72 105
30 17 71 42 30 9 71 106
31 16 70 －31 8 70 107
32 18 69 41 32 7 69 108
33 19 68 40 33 6 68 109
34 20 67 39 34 5 67 110
35 21 66 38 35 4 66 111
36 23 65 37 36 3 65 112
37 - 64 - 37 - 64 -
38 22 63 36 38 2 63 113
39 24 62 35 39 - 62 114
40 25 61 34 40 - 61 115
41 26 60 33 41 - 60 116
42 27 59 32 42 - 59 117
43 28 58 31 43 - 58 118
44 29 57 - 44 - 57 119
45 30 56 - 45 - 56 120
46 - 55 - 46 - 55 1
47 - 54 - 47 - 54 -
48 - 53 - 48 - 53 -
49 - 52 - 49 - 52 -
50 - 51 - 50 - 51 -
(-:No connection or signals in the emulator)
REJ10J2099-0200 Rev.2.00 Page 3 of 4
Apr 16, 2010

Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or
using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas
Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual
property rights of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are
fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by
such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the
military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products
or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free.
Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas
Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not
use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the
product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless
otherwise expressly specified in a Renesas Electronics data sheets or data books, etc.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools;
personal electronic equipment; and industrial robots.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment
not specifically designed for life support.
"Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or
systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating
supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for
malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a
certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety
measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for
hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures.
Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use
Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other
inquiries.
(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
http://www.renesas.com
Refer to "http://www.renesas.com/" for the latest and detailed information.
Renesas Electronics America Inc.
2880 Scott Boulevard Santa Clara,CA 95050-2554, U.S.A.
Tel: [phone], Fax: [phone]
Renesas Electronics Canada Limited
1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada
Tel: [phone], Fax: [phone]
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: [phone], Fax: [phone]
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: [phone], Fax: [phone]
Renesas Electronics (China) Co.,Ltd.
7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China
Tel: [phone], Fax: [phone]
Renesas Electronics (Shanghai) Co.,Ltd.
Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China
Tel: [phone], Fax: [phone] / -7898
Renesas Electronics Hong Kong Limited
Unit 1601-1613, 16/F.,Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: [phone], Fax: [phone]
Renesas Electronics Taiwan Co., Ltd.
7F,No. 363 Fu Shing North Road Taipei, Taiwan
Tel: [phone], Fax: [phone]
Renesas Electronics Singapore Pte. Ltd.
1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632
Tel: [phone], Fax: [phone]
Renesas Electronics Malaysia Sdn.Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre,No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: [phone], Fax: [phone]
Renesas Electronics Korea Co., Ltd.
11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea
Tel: [phone], Fax: [phone]
SALES OFFICES
If the requirements shown in the "CAUTION"
sentences are ignored, the equipment may cause
personal injury or damage to the products.
Renesas Tools Website http://www.renesas.com/tools
A
ll trademarks and registered trademarks are the property
of their respective owners.
© 2010 Renesas Electronics Corporation and Renesas Solutions Corporation. All rights reserved.
Colophon 1.0