Renesas RH850/D1x Instructions for use

Renesas Electronics
www.renesas.com
AIB3-H-14-0368 Rev. 1.01
Restricted use only
Release Date: 2017-Jun-06
1
©2017 Renesas Electronics Corporation. All rights reserved.
RH850/D1x Evaluation Boards
Evaluation Boards for
the D1x Dashboard MCU Series
D1L2H and D1M1 Mango Adapter Board
(SBEV-RH850-D1L2H/D1M1)
Please use this manual together with the respective
main board manual.
Preliminary Hardware User’s Manual
Adapter Board
D1L2H / D1M1 (176pin)
All information contained in these materials, including products and product
specifications, represents information on the product at the time of publication and is
subject to change by Renesas Electronics Corp. without notice. Please review the latest
information published by Renesas Electronics Corp. through various means, including
the Renesas Electronics Corp. website (http://www.renesas.com).
Hardware Specification

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
2
Notice
1.Allinformationincludedinthisdocument iscurrent asof thedatethisdocumentis issued. Such
information,however, issubjectto changewithoutanypriornotice.BeforepurchasingorusinganyRenesas
Electronicsproducts listedherein,pleaseconfirmthelatestproduct informationwithaRenesasElectronics
salesoffice.Also,please payregular andcarefulattentionto additionalanddifferentinformationtobe
disclosedbyRenesas Electronicssuchas thatdisclosedthroughourwebsite.
2. RenesasElectronicsdoesnotassumeanyliabilityforinfringement ofpatents,copyrights,or other
intellectual propertyrightsofthirdparties byor arisingfromtheuse ofRenesasElectronicsproductsor
technicalinformationdescribed inthis document.Nolicense,express,impliedor otherwise,is granted
herebyunder anypatents,copyrightsor otherintellectualpropertyrightsof RenesasElectronics orothers.
3.You shouldnotalter,modify,copy,or otherwisemisappropriateanyRenesas Electronicsproduct,whether
in wholeorin part.
4. Descriptionsof circuits,softwareandotherrelatedinformationinthis document areprovided onlyto
illustratetheoperation ofsemiconductorproductsandapplication examples.You arefullyresponsibleforthe
incorporationof thesecircuits,software, andinformationin thedesignof yourequipment.Renesas
Electronicsassumesnoresponsibilityforanylossesincurredbyyouorthirdpartiesarisingfrom theuseof
thesecircuits, software,or information.
5.When exportingtheproducts ortechnologydescribedinthis document,you shouldcomplywith the
applicableexportcontrollaws andregulations andfollowtheprocedures requiredbysuchlaws and
regulations.You shouldnotuse Renesas Electronics products or the technologydescribedin this document
foranypurposerelatingtomilitaryapplications orusebythe military, includingbutnotlimitedto the
development of weapons of mass destruction. Renesas Electronicsproducts andtechnologymaynotbe
usedfor or incorporatedintoanyproductsor systemswhosemanufacture,use,orsaleisprohibited under
anyapplicabledomestic orforeign laws or regulations.
6. RenesasElectronics hasusedreasonable careinpreparingtheinformationincluded inthisdocument,but
RenesasElectronics does not warrant thatsuchinformation is errorfree. Renesas Electronicsassumes no
liabilitywhatsoeverforanydamages incurredbyyouresultingfrom errors inor omissionsfromthe
information included herein.
7. RenesasElectronics products areclassified accordingto thefollowing three quality grades: “Standard”,
“High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product
depends on the product’s quality grade, as indicated below. You must check the quality grade of each
RenesasElectronicsproductbefore usingit in aparticularapplication.YoumaynotuseanyRenesas
Electronics product for any application categorized as “Specific” without the prior written consent of Renesas
Electronics. Further,youmaynot useanyRenesasElectronicsproductforanyapplicationforwhichitisnot
intended withouttheprior written consentof Renesas Electronics. Renesas Electronics shallnotbe in any
wayliablefor anydamages orlossesincurred byyouorthirdparties arising from theuseof anyRenesas
Electronics product for an application categorized as “Specific” or for which the product is not intended where
you havefailedtoobtain the priorwrittenconsentof Renesas Electronics.The qualitygrade of each
Renesas Electronics product is “Standard” unlessotherwiseexpresslyspecifiedina RenesasElectronics
datasheets or data books,etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment;
audioandvisualequipment;homeelectronicappliances;machinetools;personalelectronic equipment;and
industrialrobots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems;
anti-disaster systems; anticrime systems; safetyequipment; andmedical equipment not specifically
designedfor lifesupport.
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical
equipmentorsystemsforlifesupport (e.g.artificiallifesupport devices orsystems),surgicalimplantations,or
healthcare
intervention(e.g. excision,etc.),andanyother applications orpurposes thatposea directthreattohuman
life.
8.You should usetheRenesasElectronics products describedinthis document withinthe rangespecified
byRenesas Electronics, especiallywithrespect tothemaximum rating,operatingsupplyvoltagerange,
movementpower voltagerange,heatradiationcharacteristics,installationand other productcharacteristics.
RenesasElectronicsshallhaveno liabilityformalfunctions ordamages arisingoutoftheuseof Renesas
Electronicsproducts beyondsuch specifiedranges.
9.Although Renesas Electronics endeavors to improvethe qualityandreliabilityof its products,
semiconductor products havespecific characteristics suchas the occurrenceof failure atacertainrate and
malfunctions under certainuseconditions. Further, Renesas Electronics products arenotsubjecttoradiation
resistancedesign.Please besure toimplementsafetymeasures toguardthem againstthepossibilityof
physicalinjury,andinjuryordamagecausedbyfireintheeventofthefailure of aRenesasElectronics
product,suchas safetydesignforhardwareand software including but notlimitedtoredundancy,fire control

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
3
andmalfunctionprevention,appropriatetreatmentforagingdegradationoranyotherappropriatemeasures.
Becausetheevaluationofmicrocomputersoftwarealoneisverydifficult,pleaseevaluatethesafetyof the
finalproductsorsystemmanufacturedbyyou.
10.PleasecontactaRenesasElectronicssales officefor detailsasto environmentalmatterssuchas the
environmental
compatibilityofeach RenesasElectronics product.Please useRenesas Electronics productsincompliance
with all applicablelaws andregulationsthat regulatetheinclusionor useofcontrolled substances,including
withoutlimitation,the EU RoHS Directive.Renesas Electronics assumesnoliabilityfordamagesorlosses
occurringas aresultofyournoncompliance withapplicable lawsandregulations.
11.Thisdocumentmaynotbereproduced orduplicated, inanyform,inwholeor inpart,without priorwritten
consentof Renesas Electronics.
12.PleasecontactaRenesasElectronicssales officeif youhaveanyquestionsregardingtheinformation
containedinthis documentorRenesasElectronics products, or if youhaveanyotherinquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also
includes itsmajorityownedsubsidiaries.
(Note 2) “Renesas Electronics product(s)” means anyproduct developedormanufactured byorfor Renesas
Electronics.

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
4
Contents
1Introduction.............................................................................................................................................................. 6
2BoardOverview....................................................................................................................................................... 7
2.1 Mounting devices.......................................................................................................................................... 7
3Powersupply........................................................................................................................................................... 8
3.1 Powersupplystructure.................................................................................................................................8
3.1.1 CurrentMeasurement Jumpers.......................................................................................................... 8
3.1.2 Voltageregulators andDC-DCconverters......................................................................................... 8
3.1.3 Power SupplySelection Matrix............................................................................................................ 9
4Clocksource..........................................................................................................................................................10
4.1 Overview...................................................................................................................................................... 10
4.2 Oscillatorcircuit............................................................................................................................................10
4.3 Functionspecification...................................................................................................................................11
5ExternalMemoryfunction.....................................................................................................................................12
5.1 SerialNOR Flash........................................................................................................................................12
5.2 Mounting devices........................................................................................................................................12
5.3 Memoryconnection....................................................................................................................................12
6MultiplexControl.................................................................................................................................................... 14
6.1 Overview...................................................................................................................................................... 14
7Socket.................................................................................................................................................................... 16
7.1 Overview...................................................................................................................................................... 16
7.2 RH850/D1L2H/D1M1adapter board structure......................................................................................... 16
7.3 Mounting socket..........................................................................................................................................16
8Connectors oftheD1L2H/D1M1adapterboard.................................................................................................17
8.1 MainBoardtoAdapter Boardconnectors.................................................................................................17
8.2 Test pinconnectors.....................................................................................................................................21
9AdapterboardEncodingAddress........................................................................................................................23
10 Appendix.......................................................................................................................................................... 24
10.1 Components list...........................................................................................................................................24
10.2 Schematics oftheD1xMangoD1L2H/D1M1Adapter Board.................................................................26
11 Revisionhistory................................................................................................................................................ 35

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
5
Table list
Table3-1: Currentmeasuementsjumpers(excluding I/O portssupply).............................................................. 8
Table3-2: Currentmeasurementjumpresfor I/Oportsupply.............................................................................. 8
Table3-3: Main PowersupplySourceICoutput voltage(fromMain board)....................................................... 8
Table3-4: Main PowersupplySourceICoutput voltage...................................................................................... 9
Table4-1: Sub-Selectionofexternaloscillator......................................................................................................11
Table4-2: Selectionofcrystalorexternaloscillator..............................................................................................11
Table5-1: Mounteddevices.................................................................................................................................12
Table6-1: SignalAssignmentandfunctionofDSW1......................................................................................... 14
Table6-2: SignalAssignmentandfunctionofDSW2.........................................................................................14
Table6-3: Multiplex controltable(U2)P42_ETHER_SEL(DSW2.4)................................................................15
Table6-4: Multiplex controltable(U5)P42_P43_SEL(DSW2.3)......................................................................15
Table6-5: Multiplex controltable(U9)MD_ETHER_SEL(DSW2.2)................................................................ 15
Table6-6: Multiplex controltable(U10) MD_ETHER_SEL(DSW2.2)..............................................................15
Table7-1: ICsocket(FortheQFP176AdaptorBoard).......................................................................................16
Table8-1: Pinassignment ofconnector(CN1)................................................................................................... 17
Table8-2: Pinassignment ofconnector(CN2)................................................................................................... 19
Table8-3: Pinassignment ofconnector(CN3)P0..............................................................................................21
Table8-4: Pinassignment ofconnector(CN4)P10............................................................................................21
Table8-5: Pinassignment ofconnector(CN5)JP0............................................................................................21
Table8-6: Pinassignment ofconnector(CN6)System FunctionPins..............................................................21
Table8-7: Pinassignment ofconnector(CN7)P1..............................................................................................21
Table8-8: Pinassignment ofconnector(CN8)P11/AnalogPins..................................................................... 21
Table8-9: Pinassignment ofconnector(CN9)P16/ISM Pins......................................................................... 22
Table8-10:Pinassignmentofconnector(CN10)P2.........................................................................................22
Table8-11:Pin assignmentof connector(CN11) P17/ISMPins...................................................................... 22
Table8-12:Pinassignmentofconnector(CN12)P3.........................................................................................22
Table9-1:Adapter boardencodingaddresssetting...........................................................................................23
Figure list
Figure 2-1:Adapterboard for RH850/D1L2H/D1M1............................................................................................ 7
Figure 4-1:Schematicofoscillatorblock.............................................................................................................10
Figure 5-1 SerialFlashmemoryblock diagram..................................................................................................13
Figure 7-1:Blockdiagramofthe MCUconnections ontheD1L2H/D1M1Adapterboard...............................16

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
6
1 Introduction
TheRH850/D1xApplicationBoardispartof theRH850EvaluationPlatformandservesasasimpleand
easytouse platformforevaluatingthefeaturesandperformanceofRenesasElectronics 32-bitRH850/D1x
microcontrollers.
Sincethe adapterboardcan notbe usedas astandaloneboard,thisboardhastobematedwitha
mainboardforfullfunctionality.
Mainfeatures of theadapterboard:
Socketformountinga device
Powersupplyfrommainboard
Deviceprogrammingcapability(Connectoronmainboard)
Devicedebuggingcapability(Connectoronmainboard)
Pinheaders fordirectaccesstoeachdevicepin
MainOSCand SubOSCcircuitry
Connectorsto MainBoard
Serial FlashMemory
This documentdescribesthefunctionalityprovidedbytheadapterboardandguides theuserthroughits
operation.
Fordetailsregardingtheoperationofthemicrocontroller,refertotheRH850/D1x UserManual.

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
7
2 Board Overview
Thefigure belowdepicts theD1L2H/D1M1 MangoAdapter Board.Functionalblocksarehighlighted.
-
Figure 2-1: Adapter board for RH850/D1L2H/D1M1
2.1 Mountingdevices
Theboardis designedforreferenceuse withthefollowingdevice:
RH850/D1L2H /D1M1-176pin
SOCKET CURRENT SERIALFLASH MUX-SWITCH MUX
TESTPOINTS MUX-SWITCH OSCILLATOR CURRENT TESTPOINTS

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
8
3 Power supply
3.1 Powersupplystructure
3.1.1 CurrentMeasurement Jumpers
Each power supply of the MCU is routed through a single Jumper before connecting it to the MCU. This makes
it possibletomeasurethecurrentconsumptionof theMCUforeachpower supplydomaininseparate.
Table 3-1: Current measuements jumpers(excluding I/O ports supply)
Name of
Supply
Jumper
Function
REG0VCC
JP5
AWOdigital circuits via on-chip voltageregulator;nominal 3.3 Vand 5V
OSCVCC
JP7
MainOscand SubOsc;nominal 3.3 Vand 5V
REG1VCC
JP2
Flashmemory,nominal3.3Vand 5 V ※1
ZPDVCC
ZPDVREF
JP17,
JP18
Zeropoint detectioncircuit;nominal5V
Referencevoltage ofZero Pointdetection,normal5V
A0VREF
JP14
Referencevoltage ofA/D Converter, normal3.3V and5V
※1 D1M1,D1Lx havenoISOVDD,butinternalvoltagefrom REG1VCCis also supplied to ISOdigitalcircuit.
Table 3-2: Currentmeasurementjumpres forI/O port supply
Name of
Supply
Jumper
Function
EVCC
JP4
Port buffers P0 andJP0;nominal3.3Vand5 V
B0VCC
JP11
Port buffers portgroupP1;nominal3.3Vand5V
B1VCC
JP12
Port buffers portgroup P3;nominal3.3Vand5V
B4VCC
JP20
Port buffers portgroupP42; nominal3.3 Vand5 V
B5VCC
JP22
Port buffersport groups P43_0, P43_1,P44, and P45 ; nominal3.3 Vand 5V.
SFVCC
JP19
Port buffers portgroup P21(serialflashand MLB);nominal 3.3V.
ISMVCC
JP16
Port buffers portgroups P16andP17(StepperMotor Controller/Driver) ;
• nominal 5 V when used for stepper motor operation
• nominal 3.3 V and 5 V when not used forsteppermotoroperation
A0VCC
JP15
Ports buffers port groups P10 and P11 (A/D Converter analog circuits and input
buffers);nominal 3.3Vand5V
Noteson currentmeasurement:
Currently, the reset line is not pulled-up to full EVCC voltage. This is caused by the drop out voltage of LED24
“RESET ACT” (VRESET is only ~3.7V when EVCC is 5V). This leads to an EVCC leakage currentcaused bythe
RESETZ input buffer. To correctlymeasure the EVCC current, please add a 6.2kΩresistor in parallel to LED24
“RESET ACT” on the Mango Main Board.
3.1.2 Voltageregulators and DC-DC converters
Thepower domains on the adapter boardaresuppliedbythe main board.Thefollowing voltages aregenerated
on themainboard.
Table 3-3:Main Powersupply SourceIC outputvoltage (from Mainboard)
IC
Inputvoltage
Voltage
Netname
Spec
U7
12V
5V
+5V
Max4A
U8
12V
3.3V
+3.3V
Max4A
U9
12V
5V
ISO+5V
Max2A
U12
12V
3.3V
ISO+3.3V
Max4A
U5
U12
1.25V
+1.25V
Max2A
U6
U12
1.8V
+1.8V
Max0.5A
U1
U8
2.5V
+2.5V
Max1A
U2
U8
1.25V
+1.2V
Max1A

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
9
3.1.3 Power SupplySelectionMatrix
The voltages that can be selected to power each of the domains of the MCU differ for each device type. For
D1L2H / D1M1thefollowingvoltages can be configuredforeachpower domain.
Table 3-4:Main Power supply SourceICoutputvoltage
D1L2H / D1M1
other
3v3
5v
iso3v3
iso5v
REG0VCC
x
D
OSCVCC
x
x
D
x
EVCC
x
D
REG1VCC
x
x
D
x
ISOVDD
1.25V
PLLVCC
B0VCC
x
x
D
x
B1VCC
x
x
D
x
B2VCC
B3VCC
B4VCC
x
x
D
x
B5VCC/RVCC
x
x
D
x
MVCC/(SDRAVCC)
SFVCC
x
D
SDRBVCC
1.8V
ISMVCC
x
x
x
D
ZPDVCC
x
D
x
x
A0VCC
x
x
D
x
X: PossibleSetting,D: DefaultSetting

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
10
4 Clock source
4.1 Overview
Thereare3optionsformainclockinputto targetMCU.
・Crystal(8MHz)
・Crystaloscillator(8MHz)
・Clockinputfrom pulsegenerator
Thedefault optionis tousethesolderedcrystalsfor thehighspeedandthe lowspeedoscillator.
4.2 Oscillatorcircuit
This figureshowsschematicof oscillatorblock.
Figure 4-1: Schematic of oscillatorblock

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
11
4.3 Functionspecification
Main oscillator
Terminals: X1/X2 clock selection
oCrystal(8MHz)
oCeralock(8MHz)
oDirect clock input from external pulsegenerator
Table 4-1:Sub-Selectionof external oscillator
Loc
Function
JP6
External oscillator sub-selection
1-2select
UseBNCconnector(CN14).
2-3select
UsecrystaloscillatorY1
Table 4-2:Selectionof crystalorexternal oscillator
Loc
Function
JP8/
JP9
External oscillator select
JP8/JP9 open
R12soldered
Useon-boardcrystal
JP9 1-2closed
R12unsoldered
Useon-boardcrystal
JP8JP9-1closed
R12unsoldered
Useexternaloscillator(JP6)
Suboscillator
Terminals: XT1/XT2
oCrystal(32.768KHz)

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
12
5 External Memoryfunction
5.1 Serial NOR Flash
2x 512Mbitwithtotaldensityof 1Gbit(128MB)
2xFlash devices MX25L51245G(Macronix)
8bit, DDR@80MHz
Devicein SO-16W package
AcompatilbeProductis S25FL512S(Spansion).
5.2 Mountingdevices
Table 5-1: Mounted devices
Loc.
Manufacturer
Productname
Note
U3,
U4
Macronix
MX25L51245G
1Gbit: DDR@80MHz,SerialFlash
Memory
5.3 Memoryconnection
Memoryblockconsistsof SerialFlashonly.

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
13
・Serial FlashMemory
Figure 5-1 SerialFlash memory block diagram

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
14
6 Multiplex Control
6.1 Overview
Multiplexers (mainly for Video I/O and Ethernet) shall be manually controlled by the user themselves via DIP
switches (DSW1 and DSW2). Thus theuser has responsibilityto avoid misconfiguration of themultiplexers that
mightdestroythedevice.
The following multiplexers are placed onto the adapter board. This has been done for all high-speed I/O signals
in order to avoid unnecessary routing on the main board and for signals that are directly used on the adapter
board.
Table 6-1:SignalAssignmentandfunctionofDSW1
Switch Position
Signalname
ONFunction
OFFFunction
DSW1.1
Adapter Board Encoding
Address(ABEA) 2
ConnectABEAtoMCU
DisconnectABEAfrom
MCU
DSW1.2
Adapter Board Encoding
Address1
DSW1.3
Adapter Board Encoding
Address0
DSW1.4
Table 6-2:SignalAssignmentandfunctionofDSW2
Switch Position
Signalname
ONFunction
OFFFunction
DSW2.1
DSW2.2
MD_ETHER_SEL
Connect P3_0 and P3_1
to I2C Driver.
Connect P42 pins to
Ethernet0Connector.
DSW2.3
P42_P43_SEL
ConnectP42pinsto
P42.*1
Connect P42 pins to VIN
(CVBS).*1
DSW2.4
P42_ETHER_SEL
ConnectP42pinsto P42
or VIN(CVBS).*1
Connect P42 pins to
Ethernet0Connector.
*1: TheDSW2.3and DSW2.4arecombination setting.

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
15
Thefollowingtablesshowthesignalassignmentof themultiplexers withrespecttotheswitchpositions.
Table 6-3 and Table 6-4 are multiplexers that route the MCU signals either to the Main Board or to the Adapter
Boardaccordingtothe switchposition.
Table 6-3: Multiplex controltable (U2) P42_ETHER_SEL (DSW2.4)
Pin
IN
OUT
P42_ETHER_SEL:OFF
P42_ETHER_SEL:ON
1A
SEL_P42_0
P42_ETNB0TXD3
SEL_P42_0_P43_2
2A
SEL_P42_1
P42_ETNB0TXD2
SEL_P42_1_P43_3
3A
SEL_P42_2
P42_ETNB0TXD1
SEL_P42_2_P43_4
4A
SEL_P42_3
P42_ETNB0TXD0
SEL_P42_3_P43_5
5A
SEL_P42_4
P42_ETNB0TXEN
SEL_P42_4_P43_6
6A
SEL_P42_5
P42_ETNB0TXER
SEL_P42_5_P43_7
7A
SEL_P42_6
P42_ETNB0COL
SEL_P42_6_P43_8
8A
SEL_P42_7
P42_ETNB0CRSDV
SEL_P42_7_P43_9
9A
SEL_P42_8
P42_ETNB0TXCLK
SEL_P42_8_P43_10
10A
SEL_P42_9
P42_ETNB0RXCLK
SEL_P42_9_P43_11
11A
SEL_P42_10
P42_ETNB0RXD3
SEL_P42_10_P43_12
12A
SEL_P42_11
P42_ETNB0RXD2
P42_11
13A
SEL_P42_12
P42_ETNB0RXD1
P42_12
14A
SEL_P42_13
P42_ETNB0RXD0
P42_13
15A
SEL_P42_14
P42_ETNB0RXDV
P42_14
16A
SEL_P42_15
P42_ETNB0RXER
P42_15
Table 6-4: Multiplex controltable (U5) P42_P43_SEL (DSW2.3)
Pin
IN
OUT
P42_P43_SEL:OFF
P42_P43_SEL_SEL:ON
1A
SEL_P42_0_P43_2
P43_2
P42_0
2A
SEL_P42_1_P43_3
P43_3
P42_1
3A
SEL_P42_2_P43_4
P43_4
P42_2
4A
SEL_P42_3_P43_5
P43_5
P42_3
5A
SEL_P42_4_P43_6
P43_6
P42_4
6A
SEL_P42_5_P43_7
P43_7
P42_5
7A
SEL_P42_6_P43_8
P43_8
P42_6
8A
SEL_P42_7_P43_9
P43_9
P42_7
9A
SEL_P42_8_P43_10
P43_10
P42_8
10A
SEL_P42_9_P43_11
P43_11
P42_9
11A
SEL_P42_10_P43_12
P43_12
P42_10
12A
-
-
-
13A
-
-
-
14A
-
-
-
15A
-
-
-
16A
-
-
-
Table 6-5: Multiplex control table(U9) MD_ETHER_SEL (DSW2.2)
Pin
IN
OUT
MD_ETHER_SEL:OFF
MD_ETHER_SEL:ON
A
SEL_P3_0
ETNB0MDIO
P3_0
Table 6-6: Multiplex control table (U10) MD_ETHER_SEL (DSW2.2)
Pin
IN
OUT
MD_ETHER_SEL:OFF
MD_ETHER_SEL:ON
A
SEL_P3_1
ETNB0MDC
P3_1

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
16
7 Socket
Thischapter lists allconnectorsof theD1L2H/D1M1adapter board.Therearemainlythreegroupsof
connectors.
7.1 Overview
Adapterboards ofMCUblockcosistsofbelowcomponents.
・IC socket
・Test pinarea andexternalconnectors
・Mainboardconnectors
D1xseries haveseveralpackagevariant, thereforethe ICsocket dependsupon the packagevariant.
7.2 RH850/D1L2H/D1M1adapterboard structure
Figure 7-1shows D1L2H/D1M1adapter board block diagram.
Figure 7-1: Block diagram of theMCU connections on the D1L2H/D1M1Adapterboard
7.3 Mounting socket
This board willbefitted withoneof thesockettypesas shown below.
Table 7-1:IC socket(FortheQFP176Adaptor Board)
Manufacturer
Productname
Note
TOKYO ELETECH CORP.
HQPACK176SD
QFP176top sideparts
TOKYO ELETECH CORP.
NQPACK176SD-ND
QFP176PCBmountingsideparts

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
17
8 Connectors of the D1L2H/D1M1 adapter board
Connectiontoeachpinof thedeviceis possible viatheconnectorsCN1toCN12.
8.1 MainBoard toAdapterBoard connectors
Signal namesthatare highlightedindarkgrey, arenotusedbytheD1L2H/D1M1adapterboard.
Table 8-1:Pinassignment ofconnector(CN1)
Pin
Function / Port
Pin
Function / Port
1
+3.3V
2
VR+12V
3
+3.3V
4
VR+12V
5
+5V
6
+12V
7
+5V
8
+12V
9
10
11
ZPDVCC
12
OSCVCC
13
ZPDVCC
14
OSCVCC
15
EVCC
16
REG0VCC
17
EVCC
18
REG0VCC
19
20
21
REG1VCC
22
ISOVDD
23
REG1VCC
24
ISOVDD
25
A0VCC
26
PLLVCC
27
A0VCC
28
PLLVCC
29
ISMVCC
30
MVCC
31
ISMVCC
32
MVCC
33
SFVCC
34
SDRBVCC
35
SFVCC
36
SDRBVCC
37
38
39
B0VCC
40
B1VCC
41
B0VCC
42
B1VCC
43
B2VCC
44
B3VCC
45
B2VCC
46
B3VCC
47
B4VCC
48
RVCC/B5VCC
49
B4VCC
50
RVCC/B5VCC
51
52
53
MLBSI/SR0
54
P21_10
55
MLBSI/SX0
56
P21_11
57
MOST_INT
58
P21_12
59
60
SF_RESET
61
VI1ITU_D0
62
VG_RESERVE0
63
VI1ITU_D1
64
VG_RESERVE1
65
VI1ITU_D2
66
VG_RESERVE2
67
VI1ITU_D3
68
VG_RESERVE3
69
VI1ITU_D4
70
VG_RESERVE4
71
VI1ITU_D5
72
VG_RESERVE5
73
VI1ITU_D6
74
75
VI1ITU_D7
76
GND
77
VI1ITU_CLK
78
GND
79
VI1ITU_HSYNC
80
GND
81
VI1ITU_VSYNC
82
GND
83
84
85
GND
86
P2_11
87
GND
88
P2_10
89
GND
90
P2_9
91
GND
92
P2_8
93
94
P2_7
95
P1_11
96
P2_6
97
P1_10
98
P2_5
99
P1_9
100
P2_4

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
18
Pin
Function / Port
Pin
Function / Port
101
P1_8
102
P2_3
103
P1_7
104
P2_2
105
P1_6
106
P2_1
107
P1_5
108
P2_0
109
P1_4
110
111
P1_3
112
P0_9
113
P1_2
114
P0_8
115
P1_1
116
P0_7
117
P1_0
118
P0_6
119
120
P0_5
121
P3_13
122
P0_4
123
P3_12
124
P0_3
125
P3_11
126
P0_2
127
P3_10
128
P0_1
129
P3_9
130
P0_0
131
P3_8
132
133
P3_7
134
PWRGD
135
P3_6
136
PWRCTL
137
P3_5
138
RESETZ
139
P3_4
140
FLMD0
141
P3_3
142
143
P3_2
144
P40_0
145
P3_1
146
P40_1
147
P3_0
148
P40_2
149
150
P40_3
151
JP0_5
152
P40_4
153
JP0_4
154
P40_5
155
JP0_3
156
CSID2P
157
JP0_2
158
CSID2N
159
JP0_1
160
CSID3P
161
JP0_0
162
CSID3N
163
164
165
GND
166
GND
167
GND
168
GND
169
GND
170
GND
171
GND
172
GND
173
GND
174
GND
175
GND
176
GND
177
GND
178
GND
179
GND
180
GND
181
GND
182
GND
183
GND

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
19
Table 8-2: Pin assignmentof connector(CN2)
Pin
Function / Port
Pin
Function / Port
1
P47_X2
2
3
P47_X1
4
R0_RESERVE
5
P47_10
6
R1_RESERVE
7
P47_9
8
G0_RESERVE
9
P47_8
10
G1_RESERVE
11
P47_7
12
B0_RESERVE
13
P47_6
14
B1_RESERVE
15
P47_5
16
17
P47_4
18
P42_15
19
P47_3
20
P42_14
21
P47_2
22
P42_13
23
P47_1
24
P42_12
25
P47_0
26
P42_11
27
28
P42_10
29
P46_15
30
P42_9
31
P46_14
32
P42_8
33
P46_13
34
P42_7
35
P46_12
36
P42_6
37
P46_11
38
P42_5
39
P46_10
40
P42_4
41
P46_9
42
P42_3
43
P46_8
44
P42_2
45
P46_7
46
P42_1
47
P46_6
48
P42_0
49
P46_5
50
51
P46_4
52
P43_12
53
P46_3
54
P43_11
55
P46_2
56
P43_10
57
P46_1
58
P43_9
59
P46_0
60
P43_8
61
62
P43_7
63
P16_0
64
P43_6
65
P16_1
66
P43_5
67
P16_2
68
P43_4
69
P16_3
70
P43_3
71
P16_4
72
P43_2
73
P16_5
74
P43_1
75
P16_6
76
P43_0
77
P16_7
78
79
P16_8
80
P17_0
81
P16_9
82
P17_1
83
P16_10
84
P17_2
85
P16_11
86
P17_3
87
88
P17_4
89
P45_13
90
P17_5
91
P45_12
92
P17_6
93
P45_11
94
P17_7
95
P45_10
96
P17_8
97
P45_9
98
P17_9
99
P45_8
100
P17_10
101
P45_7
102
P17_11
103
P45_6
104
105
P45_5
106
P44_11
107
P45_4
108
P44_10
109
P45_3
110
P44_9
111
P45_2
112
P44_8
113
P45_1
114
P44_7
115
P45_0
116
P44_6
117
118
P44_5

D1L2H / D1M1 Mango Adapter Board Manual
【CONFIDENTIAL】
20
Pin
Function / Port
Pin
Function / Port
119
P10_0
120
P44_4
121
P10_1
122
P44_3
123
P10_2
124
P44_2
125
P10_3
126
P44_1
127
P10_4
128
P44_0
129
P10_5
130
131
P10_6
132
P11_0
133
P10_7
134
P11_1
135
P10_8
136
P11_2
137
P10_9
138
P11_3
139
P10_10
140
P11_4
141
P10_11
142
P11_5
143
144
P11_6
145
ETNB0MDIO
146
P11_7
147
ETNB0MDC
148
149
P467_ETNB0TXD3
150
P42_ETNB0TXD3
151
P467_ETNB0TXD2
152
P42_ETNB0TXD2
153
P467_ETNB0TXD1
154
P42_ETNB0TXD1
155
P467_ETNB0TXD0
156
P42_ETNB0TXD0
157
P467_ETNB0TXEN
158
P42_ETNB0TXEN
159
P467_ETNB0TXER
160
P42_ETNB0TXER
161
P467_ETNB0COL
162
P42_ETNB0COL
163
P467_ETNB0RSDV
164
P42_ETNB0RSDV
165
P467_ETNB0TXCLK
166
P42_ETNB0TXCLK
167
P467_ETNB0RXCLK
168
P42_ETNB0RXCLK
169
P467_ETNB0RXD3
170
P42_ETNB0RXD3
171
P467_ETNB0RXD2
172
P42_ETNB0RXD2
173
P467_ETNB0RXD1
174
P42_ETNB0RXD1
175
P467_ETNB0RXD0
176
P42_ETNB0RXD0
177
P467_ETNB0RXDV
178
P42_ETNB0RXDV
179
P467_ETNB0RXER
180
P42_ETNB0RXER
181
GND
182
GND
183
GND