Renishaw RMP600 User manual

Quick-start guide
H-5312-8500-08-A
RMP600
English (EN)
Deutsch (DE)
Español (ES)
Français (FR)
Italiano (IT)
日本語 (JA)
Polski (PL)
Česky (CS)
Русский (RU)
中文（繁體）(ZH-TW)
中文 (简体) (ZH)
한국어 (KO)
1
2

Issued: 10.2017

EN Publications for this product are available by visiting www.renishaw.com/rmp600.
DE Weitere Informationen zu diesem Produkt sind unter folgendem Link
www.renishaw.de/rmp600 abrufbar.
ES Las publicaciones para este producto están disponibles a través de
www.renishaw.es/rmp600.
FR Les documentations pour ce produit sont disponibles en visitant le site
www.renishaw.fr/rmp600.
IT La documentazione per questo prodotto è disponibile visitando il sito
www.renishaw.it/rmp600.
日本語 本製品に関する資料は、www.renishaw.jp/rmp600 からダウンロードいただけます。
PL Publikacje dotyczące tego produktu są dostępne w witrynie www.renishaw.pl/rmp600.
CS Dokumentaci k produktu najdete na www.renishaw.cz/rmp600.
RU Документация по данному изделию доступна на сайте
www.renishaw.ru/rmp600.
中文
(繁體)
請訪問雷尼紹網站以獲得此產品的的相關文件檔案: www.renishaw.com.tw/rmp600。
中文
(简体)
请访问雷尼绍网站以获得此产品的相关文档：www.renishaw.com.cn/rmp600。
한국어 이 제품의 관련 자료는 www.renishaw.co.kr/rmp600에서 확인 가능 합니다.
1
2

English
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of
a type and maximum (or lesser) gain approved for
the transmitter by Industry Canada.
To reduce potential radio interference to other
users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for
successful communication.
This device complies with Industry Canada
licence-exempt RSS standard(s).Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
Français
Conformément à la réglementation d’Industrie
Canada, le présent émetteur radio peut
fonctionner avec une antenne d’un type et d’un
gain maximal (ou inférieur) approuvé pour
l’émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage
radioélectrique à l’intention des autres
utilisateurs, il faut choisir le type d’antenne et
son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas
l’intensité nécessaire à l’établissement d’une
communication satisfaisante.
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le
fonctionnement.
Radio equipment – Canadian warning statements
Radio approvals

Radio approvals
Argentina: CNC ID: 16-9815
Australia: E2067 R-NZ
Brazil: 3019-11-2812
“Este equipamento opera em caráter secundário,
isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do
mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.”
Canada: IC: 3928A-RMP600
Europe: CE
(28 EU member
countries)
India: 1787/2012/WRLO
Indonesia: 39649/SDPPI/2015
Israel: 51-29406
Japan: 004WWA0667
Malaysia: RAVG/68W/1215/S(15-3353)
Mexico: TRA-034734-01
“La operación de este equipo está sujeta a las
siguientes dos condiciones: (1) es posible que
este equipo o dispositivo no cause interferencia
perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que
pueda causar su operación no deseada.”
New Zealand: E2067 R-NZ
Russia: 77-14/0359/2020
Singapore: Reg. No: N0465-09
Complies with
IDA Standards
DA104642
South Africa: TA-2011/1396
South Korea: REN-RMP600

Taiwan: CCAC08LP0330T1
USA: FCC ID: KQGRMP600
Vietnam: C0119200815BE01A2
Iceland Liechtenstein Montenegro Norway Switzerland Turkey
Radio approvals
China: Exempt

1-1
English (EN)
Deutsch (DE)
Español (ES)
Français (FR)
Italiano (IT)
日本語 (JA)
1

1-2
Before you begin
EC declaration of conformity
Renishaw plc declares that the RMP600 complies with the
applicable standards and regulations.
Contact Renishaw plc or visit www.renishaw.com/rmp600 for the
full EC declaration of conformity.
FCC Information to user (USA only)
47 CFR Section 15.19
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
47 CFR Section 15.21
The user is cautioned that any changes or modifications not
expressly approved by Renishaw plc or authorised representative
could void the user’s authority to operate the equipment.
47 CFR Section 15.105
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules.These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment.This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
C
WEEE directive
The use of this symbol on Renishaw products and/or
accompanying documentation indicates that the product should
not be mixed with general household waste upon disposal.It is
the responsibility of the end user to dispose of this product at
a designated collection point for waste electrical and electronic
equipment (WEEE) to enable reuse or recycling.Correct
disposal of this product will help to save valuable resources and
prevent potential negative effects on the environment. For more
information, please contact your local waste disposal service or
Renishaw distributor.

1-3
Before you begin
Safety
The RMP600 has a glass window.Handle with care if broken to
avoid injury.
In all applications involving the use of machine tools, eye
protection is recommended.
Information to the machine supplier/installer
It is the machine supplier’s responsibility to ensure that the user is
made aware of any hazards involved during operation, including
those mentioned in Renishaw product literature, and to ensure that
adequate guards and safety interlocks are provided.
Under certain circumstances, the probe signal may falsely indicate
a probe seated condition. Do not rely on probe signals to halt the
movement of the machine.
Battery safety
The RMP600 may be supplied or used with non-rechargeable
alkaline or lithium-thionyl chloride batteries.
• Do not attempt to recharge the batteries.
• Please dispose of waste batteries in accordance with your local
environmental and safety laws.
• Replace the batteries only with the specified type.
• Ensure that all batteries are inserted with the correct polarity.
• Do not store batteries in direct sunlight.
• Do not heat or dispose of batteries in a fire.
• Do not short-circuit or force discharge the batteries.
• Do not disassemble, pierce, deform or apply excessive
pressure to the batteries.
• Do not swallow the batteries.
• Keep the batteries out of the reach of children.
• Do not get batteries wet.
• If a battery is damaged, exercise caution when handling it.
Lithium batteries are classified as dangerous goods and strict
controls apply to their shipment by air.To reduce the risk of
shipment delays, if you need to return the RMP600 to Renishaw
for any reason, do not return any batteries.
Equipment operation
If this equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.

1-4
Bevor Sie beginnen
EG-Konformitätserklärung
Renishaw plc erklärt, dass der RMP600 allen zutreffenden
Standards und Vorschriften entspricht.
Zu weiteren Informationen zur EG-Konformitätserklärung wenden
Sie sich bitte an Renishaw plc oder besuchen Sie
www.renishaw.de/rmp600.
CWEEE-Richtlinie
Der Gebrauch dieses Symbols auf Produkten von Renishaw
und/oder den beigefügten Unterlagen gibt an, dass das Produkt
nicht mit allgemeinem Haushaltsmüll entsorgt werden darf. Es
liegt in der Verantwortung des Endverbrauchers, dieses Produkt
zur Entsorgung an speziell dafür vorgesehene Sammelstellen für
Elektro- und Elektronik-Altgeräte (WEEE) zu übergeben, um eine
Wiederverwendung oder Verwertung zu ermöglichen. Die richtige
Entsorgung dieses Produktes trägt zur Schonung wertvoller
Ressourcen bei und verhindert mögliche negative Auswirkungen
auf die Umwelt.Weitere Informationen erhalten Sie von Ihrem
örtlichen Entsorgungsunternehmen oder von Ihrer Renishaw
Vertretung.