Renkforce Pro 6 User manual

User Manual
Please read the User Manual before using this product.
3D Printer Pro 6
Easy solution of 3D model creation
Item No. 2356116

Professional, Intelligent, Multi-function
Pro 6

Catalog
a. Accessories list ........................................................................................................................................................................................................................................................................4
1.1 Accessories list.........................................................................................................................................................................................................................................................................4
b. Product introduction................................................................................................................................................................................................................................................................5
2.1 Appearance introduction...........................................................................................................................................................................................................................................................5
2.2 Introduction of extruder.............................................................................................................................................................................................................................................................6
2.3 Introduction of Build Platform ...................................................................................................................................................................................................................................................6
2.4 Technology Specication..........................................................................................................................................................................................................................................................7
c. Preparation before printing .....................................................................................................................................................................................................................................................8
3.1 Menu preview ...........................................................................................................................................................................................................................................................................8
3.2 The calibration of build platform .............................................................................................................................................................................................................................................16
3.2.2 Z-offset Calibration ..............................................................................................................................................................................................................................................................18
3.3 Consumable loading/unloading ..............................................................................................................................................................................................................................................23
3.3.1 Installation of the spool holder and the lament tube. .........................................................................................................................................................................................................23
3.3.2 Consumable loading of the extruder....................................................................................................................................................................................................................................24
3.3.3 Consumable unloading of the extruder................................................................................................................................................................................................................................25
3.4 Generation of printing les......................................................................................................................................................................................................................................................26
3.4.1 a) Setup of the Software-Windows® ....................................................................................................................................................................................................................................26
3.4.2 Start software- Windows®& Mac.........................................................................................................................................................................................................................................28
3.4.3 Software setting- Windows®& Mac .....................................................................................................................................................................................................................................29
3.4.4 Load conguration le - Windows® .....................................................................................................................................................................................................................................31
3.5 Print from “renkforce 3D setup” .............................................................................................................................................................................................................................................32
d. Print 3D model........................................................................................................................................................................................................................................................................33
4.1 Printing ...................................................................................................................................................................................................................................................................................33
4.2 Removal of the nished prints ................................................................................................................................................................................................................................................34
Troubleshooting .........................................................................................................................................................................................................................................................................39
Disposal.......................................................................................................................................................................................................................................................................................41
Caution illustration.....................................................................................................................................................................................................................................................................42

Name Qty. Unit
Power cable 1 pcs
4GB USB Flash disk 1 pcs
Magnetic mate 1 pcs
Full Metal Build platform 1 pcs
Z sensor calibration tool 1 pcs
Ejector rod-1.8*150 mm 1 pcs
Hex wrench-6.0 mm 1 pcs
Allen Driver within 1.5/2/2.5/3 mm dia. 4 pcs
Filament spool holder 1 pcs
Small needle 0.3*75 mm 2 pcs
Filament tube 1 pcs
Tweezer 1 pcs
USB cable 1 pcs
Side cutter 1 pcs
Housing (Top cover and front door) 1 pcs
a. Accessories list
1.1 Accessories list
Picture
4

⑤
⑥
②
④
①
③
b. Product introduction
Touch Screen
USB Slot
Build Platform
Inductive sensor of auto-leveling
Mainboard Cooling Fan
Power socket and switch
2.1 Appearance introduction
5

⑦
⑥
④
②
①
⑤
⑧
③
⑨
⑩
①②④
③
②
①
2.2 Introduction of extruder
2.3 Introduction of Build Platform
Nozzle Heat block Heater and NTC Heat break throat Heatsink
Extruder fan Object fan Cover of extruder The leverage Inductive sensor of auto-leveling
Build Platform Magnetic mate Leveling Thumb Screw (4pcs) Heating Panel
PS: Build platform can be removed and taken out, which is also separated with print surface.
6

2.4 Technology Specication
Operating voltage: 100 - 240 V/AC, 50/60 Hz
Power consumption: max.320 W
Fuse: F10AL, 250 V
Production process: Fused lament fabrication (FFF)
Model size (W*H*D): max. 200*200*200 mm
Printing layer resolution: 0.05-0.3 mm
Print speed: 20-100 mm/s
Print format: GOODE
Nozzle (ф): 0.2 mm/0.4 mm/0.6 mm/0.8 mm;0.2 mm/0.6 mm/0.8 mm is optional, not come with the device.
Filament (ф): 1.75 mm
Suitable lament material: PLA, ABS, PETG, TPU, Wood, HIPS, ePA (Nylon), ePA-CF(20 %Carbon Fiber), Bronze, Copper,
Steel, Pearl, Aluminium
Extruding temperature: +160 to +260 °C
Heat bed temperature: +40 to +120 °C
Interfaces: USB disk or USB cable
System requirements: Windows 7 or later, Mac OS 10.6.8 or later
Slicing software: Cura
Operating conditions: +15 to +35 °C, 30 – 90 % relative humidity (non-condensing)
Storage conditions: +15 to +35 °C,30 – 90 % relative humidity (non-condensing)
Dimension (W*H*D): 412*396*505 mm
Weight: 30.4kq
7

3D
Internet
Info
Zwraca
System
System
Tool
Tool
Print
Manual
Fan
Stop
Return
Preheat
Filament
Level
About
English
TPAdjust
Return
Default
Zwraca
Sound
LED light
Manual
Fan
Stop
Return
Preheat
Filament
Leveling
c. Preparation before printing
3.1 Menu preview
System/Tool/Print
−The touch screen is on when the power supply is connected and turn on the device.
−You can touch the screen for operation.
−Don't touch the screen with the sharp object.
The user can check the printing status, equipment
information, language shift factory settings, the screen
calibration, language shift by touching system icon.
The user can perform manually control, preheating,
consumable loading/unloading, levelling, air volume
adjustment, emergency stopping, sound on/o󰀨 by touching
tool icon.
8

0.1mm 1mm 10mm
EY
E
Z
Z
Y
X
X
Manual
Tool/Manual interface
The user can manually reset or perform the print bed and extruder position.
Automatic reset Print bed move backward
Print bed move upward
Z-o󰀨set calibration button
X axis move to the right
Print bed move downward
Back to the previous menu
On/O󰀨 of Z-o󰀨set calibration
Unload lament
Y axis move forward
X axis move to the left
Load lament
Click and distance movement setting
9

27/0
1
28/0
Preheat
Bed Temp
Temperature
Heatbed
Extruder
Return
Ext.Temp
Tool/Preheating interface
The user can control the temperature of extruder and build platform by touching preheat icon.
Press and start heating
The preset temperature/
The target temperature
Temperature increase
Back to previous menu
Current temperature
Extruder temperature
Temperature decrease
Print bed temperature
10

E1 E1
28/0
Filament
Load
Temperature
Extruder
Stop
Return
Unload
Tool/Filament loading/Unloading
Press and start heating
The preset temperature/
The target temperature
Stop
Filament unloading
Back to the previous menu
Current temperature
Filament loading
11

0
0
E1(%)
B(%)
Fan
Object fan in %
Extruder fan in %
Tool/Air fan
The user can control on/o󰀨 also cooling fan air volume of the extruder fan and object fan.
Air volume
decrease on/o󰀨
Air volume
increase
Back to previous menu
Object fan
Extruder fan
12

Level
Stop
Print
Body-MINI.gcode
Body-MINI.gcode
Body-MINI+.gcode
Body-MINI.gcode
Tool/Levelling
Printing menu
The user can calibrate the build platform by the menu of level.
Refer to 3.2 for detailed instructions.
The user can click emergency stop icon to turn o󰀨 all motors in case of emergency.
Select the le to start printing.
Select the le to access to print interface Page up and down
Back to the previous menu
13

1
mm/s
16%
191/190
51/50 100mm/s
04h07m 03h06m
K1-07-11.gcode
Print Menu
Stop printing
Print speed
Pause printing
Printer parameter adjustment
Remain print time
Printing process
Printed time
Build platform temperature
Nozzle temperature
14

E1(%):
(%):
(%):
(℃):
(℃):
1
mm/s
The user can adjust the print parameter by the tool menu.
Print speed percentage Object fan
Flow compensation
Back to the previous menu
Build platform temperature
Nozzle temperature
15

Tool Level
★
★
12
Remark: It is the must to preheat the build platform before doing the leveling, or the expansion of the magnetic mate after heating up will
have the great impact on the leveling results and the print results.
3.2 The calibration of build platform
Don’t adjust 4 screws under the print bed unless necessary,and it is must to following 3.2.3 when we adjust 4screws, or there
is the damage to the extruder.
The build platform has been calibrated and well levelled out of the factory, but some deviation will be occurred during
transportation, so it is better that the user can do the build platform levelling before printing.
3.2.1
Make sure the metal plate and the magnet mat have been put inside before leveling.
16

Filament Stop
Leveling
Preheating
Fan Sound Return
Manual
LED light
4
3
27/52
1
28/0
5
52/52
1
28/0
6
System
Tool Print
Enter into “Tool”-“Preheating”
Wait until the temperature of the print bed is up to the pre-set value, in this case it is 52 °C.
17

Filament Stop
Leveling
Preheating
Fan Sound Return
Manual
LED light
2
1
System
Tool Print
Filament Stop
Leveling
Preheating
Fan Sound Return
Manual
LED light
78
★
Enter into "Tool"--"Leveling" to run the auto-leveling and nish the steps.
3.2.2 Z-o󰀨set Calibration
Enter into“Tool”-“Preheating”
If we can’t get good print results,we can do the Z-o󰀨set calibration as 3.2.2.
18

0.1mm 1mm 10mm
EY
E
Z
Z
Y
X
X
6
Filament Stop
Leveling
Preheating
Fan Sound Return
Manual
LED light
5
27/52
1
28/0
3
52/52
1
28/0
4
Enter into “Manual” and press “Home” icon, when the extruder will move to the zero position.
Wait until the temperature of the print bed is up to the pre-set value, in this case it is 52 °C.
19

1mm 10mm
EY
E
Z
Z
Y
X
X
78
0.1mm
1mm 10mm
EY
E
Z
Z
Y
X
X
9
1mm 10mm
EY
E
Z
Z
Y
X
X
10
0.1mm 0.1mm
★
Turn on Z-o󰀨set calibration function and put one A4 paper between the nozzle and the print bed.
Make sure we do the Z-o󰀨set calibration under the distance setting of 0.1 mm to avoide any
damage on the extruder.
Slide the paper back and forth with ZZ
ZZ
icon until there is slight resistance between the nozzle
and the print bed, then press icon to nish the calibration.
20