Renogy Element Series User manual

Version 2.0
THE ELEMENT SERIES
THE LYCAN POWERBOX
USER GUIDE

01
NOTE
CAUTION
WARNING
IMPORTANT SYMBOLS
IMPORTANT SAFETY INSTRUCTIONS
Indicates potentially dangerous conditions that could result in
personal injury
Indicates conditions or practices that could result in damage to the
unit or other equipment
Indicates procedure or function that is important for proper and safe
operation of the unit or other equipment
Charge your Lycan up completely before use
Before using the unit, read all of the instructions and information in the user guide.
Do NOT submerge the unit under water. The unit is not waterproof.
Do NOT leave the unit outside when raining.
Do NOT overload the AC or DC outputs. Follow the power and current ratings mentioned
in this manual.
Only use wires and accessories provided by the manufacturer.
Store the unit in a dry place free from moisture, heat, and water.
Unplug the unit if it will not be in use for an extended period of time. Make sure to charge
the unit once every two months to preserve the battery life.
Do NOT store or place the unit near fire or places that can achieve higher temperatures. Doing
so may cause damage to the internals and/or battery explosion.
Keep the unit away from small children.
Do NOT dismantle or modify the system. Doing so might cause irreversible damage and
void warranty.
It’s recommended to timely charge the product upon receipt due that there may be self-
consumption of battery during transportation and storage.

03
04
04
05
06
08
08
09
10
11
12
13
14
14
14
16
16
18
02
TABLE OF CONTENTS
GENERAL
GEAR OVERVIEW
MAIN OVERVIEW
DETAILS
ACCESSORIES
OPERATIONS
LCD INFORMATION
CHARGING YOUR LYCAN POWERBOX
USING YOUR LYCAN POWERBOX
USING LED LIGHT
USING INTERNAL AND EXTERNAL BATTERY BACK
TECHNICAL SPECIFICATIONS
MAINTENANCE
DAILY MAINTENANCE
COMPONENTS REPLACEMENT
REGULAR MAINTENANCE
TROUBLESHOOTING
FAQ

03
GENERAL
Thanks for choosing Renogy's Lycan Powerbox as your new companion. The
Lycan features multiple AC and DC output ports while also supporting multiple
charging methods such as wall charging, vehicle charging, and solar panel
charging. Built with numerous applications in mind, the lycan is your new favorite
companionfor power outages, camping trips, outdoor events, or even as an
eco-friendly alternative to lighten your home’s electricity bill. After a few hours of
charging from a solar panel, wall outlet, or 12V car charging socket, the Lycan
Powerbox can be used to power a number of appliances and devices without the
noise and pollution of traditional gas generators. Compact and rugged, it’s the
perfect little powerhouse to keep you going for up to 1075 watt-hours. And as the
first portable solar storage with interchangeablel ithium iron phosphate batteries,
it’s easy to keep the power flowing for hours on end.

1 / OVERVIEW
2 / FRONT
4 / SIDE
5 / SIDE
3 / BACK
04
GEAR OVERVIEW
GEAR OVERVIEW

1 / Front Main Panel
2 / Back Interface
6 / Top 7 / Bottom
Anderson Power
Pole Port
XT90 Port
RJ45 Port
External Fuse Slots
05
DETAILS

3 / U-Bar Handle 4 / LED Floodlight
2 / 1 x AC Power Adaptor Cord1 / 1 x Lycan Powerbox
3 / 1 x MC4 to Anderson Power Pole 4 / 1 x CIG to Anderson Power Pole
06
ACCESSORIES

5 / 1 x 6.0mm Hex Key, used to unscrew the M8 screws on the upper case.
1 x 3.0mm Hex Key, used to unscrew the M4 screws on the trolley.
8 / 1 x RJ45 cable
9 / 1 x XT90 to XT90 cable
07
Check to make sure you’ve received all of the accessories mentioned below. Contact the
manufacturer if there are any missing or damaged accessories.
The following accessories are not included and require separate purchase.
Accessory
Lycan Powerbox
AC Power Adaptor Cord
MC4 to Anderson Power Pole
CIG to Anderson Power Pole
Hex Key for Upper Case
Hex Key for trolley
Qty
1PC
1PC
1PC
1PC
1PC
1PC
7 / 1 x 5.5mm DC to Light Bulb Socket6 / 1 x Anderson Power Pole to Alligator Clips

LCD INFORMATION
08
OPERATIONS
Turns on when PV, AC, or CIG inputs are being
used to charge the Lycan
Indicates the connected lead-acid battery in correct
voltage range
If input display is PV or CIG, it shows the respective
connector charging voltage. If itshows AC, then itis
the Lithiun-Iron Battery Pack charging voltage
Indicates the remaining capacity of the current
lithium battery pack
Turns on after AC Output button is pressed,indicating
that AC ports are now available for use.
Turns on after DC Output button is pressed,indicating
that DC ports are now available for use.
If input display is PV or CIG, it shows the respective
connector charging current. If it shows AC, then it is
the Lithiun-Iron Battery Pack charging current
If it shows ‘12V’, it indicates that the connected lead-
acid battery nominal voltage is 12V. If it shows ‘24V;,
it indicates that the connected lead-acid battery
nominal voltage is 24V.
Distinguishes the internal and externalbattery
packs: ‘A’ means internal lithium battery pack,
and ‘B’ means external lithium battery pack
Indicates charging with 12V vehicle power
Indicates charging by AC adapter
Indicates solar charging
Turns on when AC or DC Output buttons are pressed
Input Display
Charging Voltage
Charging Current
Indicator of Internal/
External Battery Pack
Battery Indicator
Car Charging
Electric Supply
Charging
Solar Charging
Output Display
Electric Supply
Output
DC Output
Lead-acid
Battery Access
Lead-acid battery
nominal voltage
Charge indication for
lead -acid battery Indicates charging of external lead-acid battery

车充线
09
Charging Your Lycan Powerbox
1/Charging via AC
2/Charging via car
WARNING
WARNING
Be sure to charge your Lycan Powerbox to 100% before operating. This will maximize
battery life. For healthy battery maintenance, charge the Lycan once every two months.
If the Lycan will not be used for an extended period of time, such as a month, remove
the battery and properly store it until the Lycan is in use again.
To decrease the recharge time of the Lycan it is recommended to disconnect any loads
while recharging the unit.
When the device is powered off, charging will cause it to power on and it will shut down
when charging stops.
During charging, the INPUT area on the LCD screen will be indicating the voltage and
current information.
INPUT voltage and current information will be available when the charging current is
greater than 0.1A.
Charge the Lycan Powerbox with the provided AC charging cable. The AC icon will be displayed
on the INPUT area of the LCD screen. This indicates the Lycan is charging with adapter.
Use the provided CIG to Anderson cable when charging via car. The CIG icon at the INPUT area
of LCD screen will be displayed and indicates charging with 12V DC source from your car.
Never use a damaged cord. Electrical shock may occur if the AC cord is damaged or frayed.Only
use the designated AC adapter and Lithium battery pack provided from the manufacturer
Never use a damaged cord otherwise electrical shock may occur. Contact the manufacturer
if the cord is damaged.

光伏充电器线
3/Charging via Solar
Using Your Lycan Powerbox
10
Use the provided MC4 to Anderson Pole cable to connect external solar panels to the
Lycan. Make sure to put the Lycan in a sunny place when charging via solar and place
the solar panel in proper position without shade so as to maximize charging. Upon
charging, the PV icon will be displayed on the LCD.
Short press the AC button on the main display to turn on the AC ports. There should be
a green LED indicator letting the user know they can plug in AC devices. Additionally,
the AC icon will be visible on the LCD display
Short press the DC button on the main display to turn on the DC ports. There should be
a green LED indicator letting the user know they can plug in DC devices. Additionally,
the DC icon will be visible on the LCD display. 4 USB interfaces, 3 round 12V output
interfaces and cigar lighter are available for use.
2 / DC MODE
PLEASE NOTE: The maximum wattage is 300W for charging via solar.
Keep 4 inches space on the back of the Lycan to guarantee heat dissipation of inverter
1 / AC MODE
CAUTION

Using LED Light
11
3/Charging External Lead Acid battery
Anderson Power Pole to Alligator Clips
The Lycan is capable of charging both 12V and 24V lead acid batteries;
When the lead acid battery is connected to the Lycan, the ，icon will appear, and it will be
distinguished if it is 12V or 24V in 5 seconds, and display with the respective icon
Open the LED lighting board at top, turn the switch to control LED light ON/OFF; LED
lighting is available in shutdown state.
When charging is detected on the lead acid battery, the on the LCD screen starts
to flash. When it’s detected that the charging current of lead acid battery is small, please
check if fully charged, and turn off the output. Remove the current lead acid battery
before next new output.
Do NOT start the vehicle engine when using the Lycan to charge a car battery, otherwise
it may cause the device to be damaged and lead to serious incidents.When using the
Lycan Powerbox to charge Lead Acid Battery, stop the charging process if the '12V' or
'24V' displayed on the LCD is different from the actual voltage rating of the connected
Lead Acid Battery.
CAUTION

CONNECTION
CHARGING-OVER
Using Internal and External Battery Pack
12
The Lycan allows you to prepare a library of fully charged batteries for quick, hassle-free
reloads. Now there is no waiting hours for the unit to recharge, simply swap it out for
another battery and experience no power interruptions. In addition, charge external
lithium batteries or even sealed lead acid batteries through the Lycan’s unique design.
When charging, the Lycan charges the internal battery by default which will be denoted
by the indicator A at the lower left of power icon keeps on.
If charging an external battery pack, please make sure it is connected in via XT90 power
cable interface and RJ45 network interface. In the interface area, push the switch to the
left and the indicator B will be visible right of battery icon in LCD screen. The display will
be geared towards external battery pack, and then the external battery pack is available
for charging / discharging.

Type
Voltage
Capacity
Cycle Life
Rated Charging Current
Inverter Wave Form
AC Outlet Voltage
USB DC Out
CIG Out
DC Out
PV Input Voltage
Maximum External PV Input Power
Operating Temperature Range
Charging Temperature Range
Storage Temperature Range
Operating / Storage Humidity
Method of Cooling
Dimensions
Weight
Certifications / Standards
Lithium iron phosphate battery
44.8V
24AH
12A(Max15A)
Pure Sine Wave
110V (1200W Max)
5V 2.4A(Max 7A ,4ports total)
12V(Max 150W)
12V (Max 60W, 3 ports each)
12-72V PV MPPT
300W
-4℉to 113℉
32℉to 104℉
-4℉to 104℉
10%~90%
Fan
14.5 x 13.4 x 11.8 inches
55 lbs
2000 cycles to 80% capacity
Output Ports
Input Ports
General System
13
TECHNICAL SPECIFICATIONS
Battery
(80% DOD @25℃, Discharge rate: 1C)
FCC UN38.3

Daily Maintenance
1/OperatingEnvironment
2/Fault Alarm and Treatment
3/Charging / Discharging
Component Replacement
14
In order to enhance the battery cycle life and equipment life, please keep away from
harsh sunlight, water, dust and dirt. Do not leave the Lycan outside under harsh
environments. The high temperature can lead to a chemical reaction inside the lithium
battery which will damage the battery and decrease the cycle life.
Please charge the equipment regularly and avoid using large loads when battery
capacity is low.The best time to recharge the equipment is when the battery capacity is
at 40%. It’s recommended to fully charge / discharge the battery once every month to
extend battery life.
All the components included in the Lycan are prone to wear and tear. Please make sure to
replace any worn out parts, damaged wires or loose screws. If you are having issues
replacing a part contact RENOGY or the supplier.
Only trained personnel should be allowed to disassemble and replace the internal
components. Before inspection and maintenance, please make sure the power is
cut off and the battery switch is closed.
Do not leave objects inside the Lycan doing so may cause the unit to short circuit
and can damage to the equipment.
In case of fault alarm during operation, corresponding fault treatment methods shall be
taken to avoid damage of equipment.
MAINTENANCE
In order to extend equipment cycle life, please carry out daily maintenance.
NOTE

Replacement of Internal Lithium Battery Pack
Please follow the steps below when replacing the internal lithium battery pack.
15
Be careful when removing the upper case; do not pull off the internal connection
line.Do not leave any equipment inside the Lycan when replacing the battery pack.
Make sure the device is in shutdown statewhen
replacing the lithium battery pack.Also make sure
there is no flammable or explosive objects nearby.
Replacement of Internal Lithium Battery Pack
Power off the equipment, remove all wires
Remove the fastening screws on the upper case
Remove the fastening screws on the back trolley, and remove the trolley
Remove the upper case
Remove the fastening screws on the fixing batten of lithium battery pack, and
remove the batten
Pull off the network cables and power cords of internal lithium battery pack
Take out the lithium battery pack
Put in the replacing lithium battery pack and install it
Remove the rubber stoppers and
fastening screws on the upper case.
Remove the rubber stoppers and
fastening screws on the front interface.
Remove the fastening screws on the
back trolley, and remove the trolley.
Remove the fastening screws on the fixing
battens of lithium battery pack, and remove
the batten.
Disconnect XT-90 cable and RJ45 cable
from the lithium battery.
NOTE
WARNING

Regular Maintenance
TROUBLESHOOTING
LCD displays Abnormal Lithium
battery pack
Equipment
Failure
Fault Cause Solutions
LCD displays
It indicates no communication with lithium battery
In case the equipment does not operate normally after startup please refer to the
following table to find the possible cause. At the same time, please check whether it is
caused by the external environment, such as high/low temperature and humidity.
In case the unit shuts down due to low battery voltage, charge the battery within 30 days
to avoid any damage to the battery pack.
If the Lycan will not be used frequently it’s recommended to keep the battery power
capacity within 45%～55% and store the unit in a clean, dry and ventilated environment
with temperature of 77℉±41℉, humidity not higher than 75%, and to keep it away from
corrosives, fire and heat sources.
It is recommended to charge the battery to 100% then completely discharge it to 0% and
then recharge it back to 45%-55% once every 6 months. This will help prolong battery
life. If the battery capacity decreases abnormally please contact RENOGY or the
supplier.
16
Check all the connections, make sure there are no loose screws.
Check all parts and cables, make sure to replace any worn out parts.
Carry out regular cleaning of the air inlet, outlet and fan blades.
1、Remove all electrical devices;
2、Check whether the battery pack selector
switch is in the correct position;
3、Check whether the connection between
the communication cable and the battery
pack is fastened;
4、Charge the equipment;
5、Press the power button to restart the equipment;
6、Turn off the LED light
It indicates no communication with inverter
1、Unplug any AC devices;
2、Press the AC output control button to try
to restart the inverter;
3、Press the power button to restart the equipment
Please contact RENOGY or the supplier for help if the following troubleshoot solutions do not work.

LCD displays
LED indicator
of power button
is not on
LCD is not on
or with
splash screen
LCD displays
LCD displays
GENERAL
1.WHAT TYPE OF BATTERY IS IN THE LYCAN? WHAT’S THE CYCLE LIFE OF THE LYCAN BATTERY?
17
Over temperature
of Lithium
battery pack
1、Remove the AC devices;
2、Press the AC output control button to try
to restart the inverter;
3、Press the power button to restart the
equipment;
4、The inverter may be over temperature
protected, let the inverter cool down for
a while
1、Remove all electrical devices;
2、Check whether the battery pack selector
switch is in the correct position;
3、Check whether the connection between
the communication cable and the battery
pack is fastened correctly;
4、Charge the equipment;
5、Press the power button to restart the
equipment;
6、Turn off the LED light
Fault Causes Solutions
Abnormal
alarm / fault
of inverter
Abnormal
output of
battery pack
Battery pack
not working
FAQ
The Lycan is equipped with a replaceable Lithium-Iron Phosphate (LFP) battery pack, one
of the safest batteries in the market today. The battery pack is rated for 2000 cycles (80%
DOD at 77℉) and features an intelligent battery management system.
Lithium battery
pack lowcapacity
It indicates battery low voltage. The inverter
output will stop. Please charge the equipment.
It indicates battery high temperature. The
inverter output will stop. Please disconnect
any loads and turn off the unit.
There will be no AC output

DISCHARGING
2.WILL MY DEVICES WORK ON THE LYCAN? CAN I OPERATE AC AND DC DEVICES AT THE SAME TIME?
3.CAN I CHARGE OTHER BATTERIES WITH THE LYCAN? CAN THE LYCAN WORK AS A JUMP STARTER FOR MY VEHICLE?
18
MECHANICAL
4.HOW LONG DOES IT TAKE TO FULLY CHARGE MY LYCAN THROUGH AC POWER?
5.CAN I USE MY LYCAN’S AC & DC PORTS WHILE IT IS CHARGING?
6.WHAT MATERIAL IS THE LYCAN STRUCTURE MADE OF? IS THE PULL ROD RELIABLE?
It takes 12 hours to fully charge the Lycan via AC power.
SAFETY & PROTECTION
SUPPORT
7.HOW MUCH WEIGHT CAN I PUT ON THE LYCAN? CAN I SIT ON IT?
8.IS THE LYCAN WATERPROOF?
9.WHAT TYPE OF ELECTRONIC PROTECTIONS DOES THE LYCAN HAVE?
10.HOW DOES THE WARRANTY WORK? CAN I REPLACE THE BATTERY IN MY LYCAN POWERBOX?
A. The Lycan has a 1 year material and workmanship warranty.
B. Yes, the battery is replaceable. Please follow our battery replacement guide.
Every device has a rated power value, typically rated in Watts (W). The Lycan’s combined
AC ports can run a maximum of 1200W continuously. If your device runs on less power than
1200W, then the Lycan will be able to work with your devices. In addition, you can operate
both AC and DC devices at the same time. However, be mindful that the higher the wattage,
the less time it will be able to run on the Lycan.
A. Yes, the Lycan can charge 12V/24V Sealed Lead Acid Batteries.
B. No, the Lycan is not able to jump start a car. However, you can still use it to fully charge
the car battery. It will shut down the output when the battery voltage reaches the set value.
Yes, the Lycan Powerbox integrates separate management systems so that you can charge
and discharge at the same time.
The upper and lower case are made of reinforced ABS plastic, while the middle frame is
structuralized sheet metal. The pull rod is fixed on the internal metal frame, ensuring
stability and reliability of the structure.
The Lycan is not recommended for sitting on. However, the maximum weight the Lycan can
support is 165 lbs. of static weight. Be mindful that the LED is located on top of the Lycan
and constant negligence may damage the LED or loosen parts.
The Lycan is equipped with the following electronic protectionsCharging circuit — Overcharge
and over voltageDischarging circuit — Over-discharge and low voltageBattery — Overcharge,
over-discharge, and short circuit.
The Lycan is not waterproof. It has an IP23 rating and is spray proof while the interface door closed.

Renogy reserves the right to change the contents of this manual without notice.
2775 E. Philadelphia St., Ontario, CA 91761
1-800-330-8678