Repotec RP-G1600U User manual

16 Port and 24 Port 10/100/1000M
Gigabit Switch
User Manual
PKUM00348

16Port24PortGigabitSwitch UserManual
Table of Contents
Chapter 1 Introduction...................................................................... 3
1.1 Welcome.........................................................................................................................3
1.2 About This Guide ........................................................................................................3
1.3 Copyright statement..................................................................................................3
1.4 Contents of Package..................................................................................................4
Chapter 2 Getting to know the Gigabit Switch................................... 4
2.1 Switch Front Panel .....................................................................................................4
2.2 Switch’s Back Panel...................................................................................................5
Chapter 3 Install Switch.................................................................... 5
3.1 Installation method..............................................................................................................5
3.2 Desktop or Shelf Installation...............................................................................................6
3.3 Rack Installation .................................................................................................................6
3.4 Power on the Switch............................................................................................................6
APPENDIX A Specifications................................................................ 7
2

16Port24PortGigabitSwitch UserManual
Chapter 1 Introduction
1.1 Welcome
The 16- or 24-Port 10/100/1000 Gigabit Switch provides non-blocking, wire speed switching for
your 10, 100, and 1000 megabit network clients. Drop this switch in place of your current
workgroup hub or switch, and you can upgrade your high-requirement workstations to full Gigabit
speeds as necessary, while continuing to service other clients at their current speeds. Or build your
network from the ground up, with appropriate link speeds for each user’s requirements. Either way,
it’s perfect for graphics, multimedia, and other applications that have to move large files across the
network quickly. With the 16- or 24-Port 10/100/1000 Gigabit Switch, you can connect your
existing 10/100 Ethernet network to a Gigabit server backbone without any additional equipment.
All ports have automatic MDI/MDI-X crossover detection, so you don't have to worry about the
cable type. Each port independently and automatically negotiates for best speed and whether to
run in half- or full-duplex mode.
1.2 About This Guide
This User Manual contains information on how to install and configure your
Wireless Adapter to get your network started accessing the Internet. It will
guide you through the correct configuration steps to get your device up and
running.
Note and Caution in this manual are highlighted with graphics as below to
indicate important information.
Contains related information corresponds to a topic.
Necessary steps, actions or messages should not be ignored.
1.3 Copyright statement
No part of this publication may be reproduced, stored in a retrieval system,
or transmitted in any form or by any means, whether electronic, mechanical,
photocopying, recording, or otherwise without the prior writing of the
publisher.
3

16Port24PortGigabitSwitch UserManual
1.4 Contents of Package
z16/24 Port Gigabit Switch
zPower cord
zManual
If any of the above items are missing, please contact your reseller.
Chapter 2 Getting to know the Gigabit Switch
The 16 and 24 Port 10/100/1000M Gigabit Switch differ in number of LEDs
and ports.
2.1 Switch Front Panel
16Port Giga Switch Front Panel
24Port Giga Switch Front Panel
The LEDs and network ports are located on the front panel of the Switch.
1. LED Description:
LED Light Status Description
PWR ON The PWR led will light up when the Switch
is powered on.
ON The LED will light up when there is a
connection made through its
corresponding port.
LNK/ACT
FLASH The LED will flash when there is activity
on its corresponding port.
ON The LED will light up when this port works
at 1000Mbps.
1000M
OFF When the LED if off, it indicates the port
works at 10Mbps or 100Mbps.
4

16Port24PortGigabitSwitch UserManual
2. network ports
These ports are connection points for PCs and other network devices,
such as additional switches.
2.2 Switch’s Back Panel
16Port /24Port back Panel
zAC Power Connector: This is a three-pronged connector that supports the
power cord. Plug
zIn the female connector of the provided power cord into this connector, and
the male into a power outlet. Supported input voltages range from
100-220V AC at 50-60Hz.
zRadiator Fan: This is an equipped for taking from the temperature of the
switch.
Chapter 3 Install Switch
The site where you place the Switch may greatly affect its performance. When
installing, take the following into your consideration.
3.1 Installation method
zFollow the guidelines below to install the Switch.
zInstall the Switch in a fairly cool and dry place. See the Technical
Specifications for the acceptable temperature and humidity operating
ranges.
zInstall the Switch on a sturdy, level surface that can support its weight, (at
least 4KG)
zConnect the power cord to the Switch and the power outlet. The distance is
no more than 182cm.
zLeave at least 10cm (about 4 inches) of space at the front and rear of the
Switch for ventilation.
5

16Port24PortGigabitSwitch UserManual
3.2 Desktop or Shelf Installation
When installing the Switch on the desktop or shelf, please attach the rubber
feet to the Switch. Peel off the protective paper on the pads and attach them on
the bottom of the Switch (one at each corner).
3.3 Rack Installation
The Switch is rack-mountable and can be installed on an EIA-19 inch
equipment rack. To do this, first install the mounting brackets on the Switch’s
side panels (one on each side), secure them with the included screws, and
then use the screws provided with the equipment rack to mount the Switch on
the 19 inch rack.
3.4 Power on the Switch
The Switch has a universal power supply ranging from 100V to 220V AC,50 ~
60Hz power source. The AC power connector is located at the rear of the unit
adjacent to and the system fan. The switch’s power supply will adjust to the
local power source automatically.
6

16Port24PortGigabitSwitch UserManual
APPENDIX A Specifications
Standards: IEEE 802.3, IEEE 802.3u, IEEE802.3ab
Interface: RJ-45
LED: PWR, LNK/ACT, 1000M
Dimensions: 432*200*44MM
Unit Weight: 2.8Kg
Power input: 100~240V AC 50~60Hz
Certifications: FCC CE
Operating Temp.: 0ºC to 40ºC
Storage Temp.: -20ºC to 70º C
Operating Humidity: 10% to 85%, Non-Condensing
Storage Humidity: 5% to 90%, Non-Condensing
7