Repotec RP-PE054J/F User manual

1
5 ports Fast Ethernet Switch
With 4 Port PoE
High Power Injector
User Manual
Ver 1.0

2
1. Introductions
The RP-PE054J/F, a 4 ports Power over Ethernet (PoE) Fast Ethernet Switch,
provides a 4-port broadband 10M/100Mbps Ethernet Switch with High Power Injection
capability plus one uplink port for 10M/100Mbps Fast Ethernet. With 4 dip switches, each
PoE port can be manually set for On-Off control. RP-PE054J/F is supporting high power
injector of upto 48W if one port PoE is ON, or 48W on each PoE port if two PoE ports are
ON, or 40W if three PoE ports are ON, or full 30W on each PoE port if four PoE ports are
ON.
Every port including the uplink port can automatically sense your type of cable, so
there is no need for crossover cables whether you are connecting this switch to another
switch or to a computer. In addition, each port can automatically sense if the connected
network devices are running at 10Mbps or 100Mbps and Half/Full-Duplex mode, and
adjust accordingly.
RP-PE054J/F receives and forwards traffic seamlessly with its non-blocking
wire-speed. Every port simultaneously supports up to 200Mbps of bandwidth in full-duplex
mode. This feature provides full wire speed to the connected devices and allows to run a
smooth network. With store and forward features, it maximizes network performance
while minimizing the propagation of bad network packets.
2. Packing Contents
Inside the package you should find:
(1) One POE SWITCH Switch
(2) One AC to DC Power Adaptor (DC48V/2.7A)
(3) One Power Cord
(4) One User Manual
Please check if the packing is damaged or any component is missing. If so, please contact
your distributor.

3
3. LED Indicators
On the front panel, there are 10 LED indicators as the following;
POWER: “Green On” indicates power is on and normal.
UPLINK: “Green On” indicates Ethernet Uplink port is in connection.
“Fast Flashing” indicates Ethernet Uplink data activities at 100M.
“Slow Flashing” indicates Ethernet Uplink data activities at 10M.
LINK: “Green On” indicates each Ethernet LAN port is in connection.
“Fast Flashing” indicates each Ethernet LAN data activities at 100M.
“Slow Flashing” indicates each Ethernet LAN data activities at 10M.
PoE: “Green On” indicates Power over Ethernet function is enabled.
“OFF” indicates the PoE is disabled, and it becomes a regular LAN port.
4. Dip Switch Settings vs Power over Ethernet
1 port ON 2 ports ON 3 ports ON 4 ports ON
Maximum
PoE Power 48Watts 48Watts 40watts 30Watts
Note that the dip switches can be switched ON and OFF anytime. However, it is
suggested that the dip switches be set ready before the PoE port is connected for
power management.
5. Application Notes
Connections with PoE PD Devices

4
6. Technical Specifications
Standards IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x Flow Control
PoE Features
Number of Ports: 5
PoE Ports: 4
PoE On/Off Control: Dip Switches
PoE Power Injection: 120Watts in total
Ethernet Switch Features
MAC Address: 2K
Buffer Memory: 512K bits
Store and Forward
Auto MDIX
Auto Negotiation
Non-Blocking
Filtering/Forwarding
Rates 100Mbps port - 148,800pps
10Mbps port - 14,880pps
Transmission Media 100BaseTx Cat. 5 UTP/STP
10BaseT Cat. 3, 4, 5 UTP/STP
Led Indicators Per Port: Link/Act with 10/100M, PoE ON/OFF
Per Unit: Power
Power Adaptor Input: 90-260VAC, 50~60Hz
Output: 48VDC 2.7A
Power Consumption 3 Watts (Max)
Dimensions 120 × 90 × 28 mm (L x W x H)
Weight 0.6 kg
Operating Temperature 0 to 55℃
Storage Temperature -20 to 90℃
Humidity 0 to 90% RH (non-condensing)
Certifications FCC , CE
(P/N: 41NE-PE054JF0-A00)