With the help of the master code, codes can be programmed and existing codes can
be changed or deleted:
Enter the master code to access the programming mode.
Master code #
Example: 4711 #
Result: You are now in programming mode.
Enter the position, you want to generate a code for.
Position #
Example: 2 #
Result: Position 2 can now be written.
Enter new code (a code can have a length of up to 8 digits).
New code # new code #
Example: 4567 # 4567 #
Result: Code 4567 is now programmed.
To delete a code from a position, simply enter the # key twice without entering a
code. The corresponding position will deleted in this way.
Press the # key again to exit programming mode.