Rescue Solutions International Tactical ResQmax User manual

Operation Manual
"The Global Leader in intrinsically safe line-throwing equipment"
INC
R
E
S
C
U
E
S
O
L
U
T
I
O
N
S
I
N
T
E
R
N
A
T
I
O
N
A
L
ResQmax
TM
the NEW Generation
TACTICAL

Tactical ResQmax Operation Manual
2
Service
Any service or maintenance other than items described in this Manual (refer to page 30) must be
performed by a technician certied by the Manufacturer to perform such work. It is the purchaser’s
responsibility to register the product with the Manufacturer. Failure to complete warranty registration
will void the warranty. For your convenience, a Service & Maintenance Record is provided on page
34 of this manual. It is the purchaser’s responsibility to enter the date of purchase on the Service
& Maintenance Record and to ensure that servicing is done in accordance with the Manufacturer’s
recommendations. Rescue Solutions International, Inc. oers FREE technical support for the Tactical
ResQmax. Call 800-709-5018 or e-mail at [email protected].
Warnings
This equipment is intended to be used by professionals trained in the use of similar equipment. Misuse
of this equipment may cause bodily injury or death. Manufacturer disclaims all liability resulting from
the use of this equipment in any manner other than that prescribed by the Manufacturer.
TheTactical ResQmax is extremely powerful and propels a Projectile at high speed. It is NOT a rearm,
but the same precautions should be used. If misused, this equipment could cause serious bodily
injury or death. Handle all components with the appropriate care.
DO NOT deploy the Tactical ResQmax directly at any person or property. When testing or training
with the Tactical ResQmax, make sure that no persons or property are in the vicinity of the target.
The Tactical ResQmax requires proper training and servicing. If you are not familiar with this
equipment or are unwilling to follow the recommendations as outlined in this Operation Manual,
then you should not operate this equipment. The user must follow recommended servicing and
maintenance guidelines to ensure the long-term integrity and safety of the Tactical ResQmax.
Loads imposed on Climbing Grappling Hooks should never exceed the marked rating. Any Grappling
Hooks certied for climbing must be removed from service if any signs of damage or deformity are
visible.
It is the responsibility of the purchaser of any Grappling Hooks certied for climbing to establish a
program which provides for regular examination of eachGrappling Hook for deformation or invisible
fractures using a magnetic particle test or other similar test. Any Grappling Hook which shows hidden
fractures as a result of such a test should be immediately removed from service.The frequency of this
examination is at the discretion of the purchaser, and should be based upon the use of the grappling
hook. It is the purchaser’s responsibility to ensure that all Grappling Hooks certied for climbing are
maintained in a manner which makes them suitable for their intended use.
If you are uncertain about the proper usage, care, maintenance, or any other aspect of this equipment,
contact Rescue Solutions International, Inc. directly by phone at 800-709-5018 or by e-mail at
[email protected].
©2014 Rescue Solutions International, Inc.
708 SW Umatilla Ave.
Redmond, OR 97756, USA
Tel: [phone] / toll-free: 800-709-5018
Fax: [phone]
e-mail: [email protected] / www.resqmax.com

Tactical ResQmax Operation Manual 3
Table of Contents
Introduction.................................................................................................... 5
Purpose of the Tactical ResQmax.........................................................................................5
Applications ................................................................................................................................5
Performance Range .................................................................................................................5
Safety Features...........................................................................................................................6
Multi-Shot Capacity..................................................................................................................6
Fueled by Compressed Air .....................................................................................................6
Main Components & Accessories .................................................................. 7
Launcher.......................................................................................................................................7
Line Containers ..........................................................................................................................7
Folding Stock .............................................................................................................................7
Streamline Filler Hose Assembly..........................................................................................8
ResQmax Tool Kit.......................................................................................................................8
Projectiles.....................................................................................................................................9
Climbing Grappling Hook .....................................................................................................9
Climbing Line and Tactical Ladder Options..................................................................10
Kit Carry Bag ............................................................................................................................ 10
Pelican Transport/Storage Case ........................................................................................ 10
Launcher........................................................................................................11
Extending the Folding Stock..............................................................................................11
Collapsing the Folding Stock .............................................................................................11
Connecting the Launcher to the Line Container........................................................ 12
Disconnecting the Launcher from the Line Container............................................. 12
Operating the Safety Push Knob ..................................................................................... 13
Resetting the Safety .............................................................................................................. 13
Loading the Projectile in the Launcher .......................................................................... 14
Operating the Nozzle Valve to Pressurize the Launcher .......................................... 15
Opening the Nozzle Valve in the Launcher................................................................... 15
Closing the Nozzle Valve in the Launcher ..................................................................... 15
Operating the Launcher Bleed Screw............................................................................. 16
Projectiles......................................................................................................17
Using the Line Projectile...................................................................................................... 17
Protecting the Cylinder/Projectile.................................................................................... 17
Filling the Projectile............................................................................................................... 18
Storing the Projectile ............................................................................................................ 20
Checking Projectile Pressure ............................................................................................. 21
Removing Charged Projectile from the Launcher ..................................................... 21

Tactical ResQmax Operation Manual
4
Payloads ........................................................................................................22
Packing the Climbing Line.................................................................................................. 22
Packing the Ascending Tactical Ladder.......................................................................... 23
Connecting the Lines............................................................................................................ 23
Climbing Grappling Hook................................................................................................24
Preparing the Climbing Grappling Hook for Deployment...................................... 24
Deployment ..................................................................................................26
Deploying the Tactical ResQmax ......................................................................................26
Maintenance .................................................................................................27
Care of the Projectile............................................................................................................. 27
Care of the Launcher............................................................................................................. 27
Replacing the O-Rings in the Nozzle Valve ................................................................... 28
Replacing the Nozzle Pressure Relief Assembly.......................................................... 30
Service .........................................................................................................31
Service & Maintenance Record....................................................................32
Frequently Asked Questions .......................................................................33
Limited Warranty..........................................................................................35
Disclaimer .....................................................................................................35
Technical Specications ..............................................................................36

Tactical ResQmax Operation Manual 5
Purpose of the Tactical ResQmax
TheTactical ResQmax is a new generation tactical line-throwing appliance fueled by compressed
air, specically designed to deploy:
• alineonly
• agrapplinghookandclimbingline
• agrapplinghookandascendingladder
to an otherwise inaccessible point in both land-based and maritime environments.
The Tactical ResQmax comes completely assembled and ready for operation, except for
lling with compressed air. Adequate training in all aspects of the use of this equipment
is essential in order to familiarize yourself with its safe operation and capabilities.
Review all instructions in this Tactical ResQmax Operation Manual and accompanying
Training CD prior to rst use.
Applications
Some applications of the Tactical ResQmax include:
 • MessengerLineDeployment
 • ShiptoShipLineDeployment
 • ShiptoShoreLineDeployment
 • ManOverboard
 • OneRopeBridge
 • RetrievalofMooringLines
 • DeploymentofSpillContainmentBooms
 • MethodofEntry
 • ShipBoarding
Performance Range
The range of the Tactical ResQmax varies depending on:
 • typeandweightoflineused
 • typeofprojectileand/oraccessoriesused
 • volumeandpressureofairintheProjectileattimeofdeployment
Introduction
In special circumstances, additional distances may be achieved by using the equipment at higher
pressures.There is a signicant safety margin engineered into each unit permitting safe operation
of the units at pressures equal to 120% of rated service pressure on a case-by-case basis.

Tactical ResQmax Operation Manual
6
Note:
When installed
in the Launcher,
the Projectile
Nozzle Valve
should remain
closed at all
times except
immediately
prior to
discharge.
Safety Features
The Launcher Safety Assembly automatically engages each time a projectile is inserted,
preventing accidental launch of a Projectile. An audible“Click”is heard as the Projectile engages,
signaling that the Projectile is safely engaged with the Launcher Mechanism.
A Pressure Relief Assembly is installed in the nozzle of each Projectile. Its purpose is to prevent
any unsafe pressure build-up in a lled Projectile, whether in the Launcher or not, if exposed to
extreme heat, such as from a re. This Pressure Relief Assembly will rupture if the air pressure
goes over a safe limit. The Pressure Relief Assembly is not reusable and must be replaced if it
should ever fail.
A second Pressure Relief Assembly is installed on the Launcher Mechanism and is active at all
times when the Mechanism is pressurized. A spare Pressure Relief Assembly is provided with
each Tactical ResQmax.
Multi-Shot Capacity
Our patented Nozzle Valve Assembly permits any number of Projectiles to be pre-charged
and stored with each unit, allowing deployment of multiple Projectiles in rapid succession.
Properly maintained Projectiles will hold a charge for one year or longer.
Fueled by Compressed Air
The ONLY intended fuel for this system is compressed air, which is non-ammable and non-
combustible.
CAUTION: The use of any other compressed gas, either ammable and/or
combustible (including nitrox or other oxygen-enhanced mixtures), may result
in a spontaneous explosion causing severe injuries or death.
Note:
This equipment
is NOT oxygen
safe! Never use
a compressed
air mixture that
includes an
elevated level of
oxygen.

Tactical ResQmax Operation Manual 7
Main Components & Accessories
Launcher #520
Line Containers #772 and #773
The Line Container for your Tactical ResQmax is selected according to the length and diameter
of the Line used. Some line options require the Large Line Container (Fig. 1) while others may
utilize the Compact Line Container (Fig. 2).
Folding Stock #703
The Folding Stock enhances the operator’s ability to aim the Projectile more accurately (Fig. 2).
When in the folded position the Folding Stock becomes a convenient carrying handle (Fig. 1).
Figure 1 - Launcher, right side view
Figure 2 - Launcher, left side view
Folding Stock #703
Pressure Gauge #507
Safety #505 Valve Key #510
Large Line Container #773
Trigger
#503
Handle #501
Barrel #502
Bleed Screw #506
Compact Line Container #772
Note:
The Figures in
this manual
show the Tactical
ResQmax in a
dark grey color
rather than its
actual black color.
This has been
done for clarity of
illustration. ALL
Tactical ResQmax
units are black.

Tactical ResQmax Operation Manual
8
Streamline Filler Hose Assembly #91x-S
The Streamline Filler Hose Assembly (Fig. 3) is used to deliver compressed air from an air
compressor, a SCBA tank or a SCUBA tank to the Projectile. This provides the “charge” for the
Projectile. Please ensure that your Streamline Filler Hose is equipped with proper tting for
your source of compressed air. A complete list of available adapters is outlined below. Multiple
ttings may be supplied with each Tactical ResQmax to permit charging from multiple air
sources if required.
ResQmax Tool Kit #990
The optional ResQmaxTool Kit (Fig. 4)provides all the tools needed for operational maintenance
of the Tactical ResQmax.
Assorted Hex
Key Drivers
#99101-#99104
Retaining Clip Pliers
#99105
Hook and Lift Tool
#99107
T-30 Torx Wrench
#99106
Figure 4 - ResQmax Tool Kit
Figure 3 - Streamline Filler Hose Assembly
Connect to
air source
using
appropriate
tting
Connect to
Projectile
SCBA Adapter
#9111-S
SCUBA Adapter
#9121-S
SCBA-DIN Adapter
#9131-S
SCBA to Compressor Adapter
#9151-S
DIN to Compressor Adapter
#9161-S
SCUBA to Compressor Adapter
#9171-S
Nozzle Plug O-ring Tool
#99108
.

Tactical ResQmax Operation Manual 9
Projectile Protector
#610 Projectile Cylinder
#30001 (3,000 psi / 207 Bar)
#30801 (3,625 psi / 250 Bar)
Nozzle Assembly
#604-S
Bridle Lines
#30003
Bridle Line Quick-Link
#30004
Figure 5a - Line Projectile #300-S / #308-S
Figure 5b -
Training Projectiles
#305-S / #306-S
Line Projectiles #300-S, #305-S, #306-S, and #308-S
Line Projectile #300-S and #308-S (Fig. 5a) will deploy a variety of lines over a range of
distances depending on the service pressure and the type of line used. The Projectile Protector
is intended to protect the Projectile Cylinder from damage on contact. If the Protector shows
signs of damage after use it must be removed, the Projectile Cylinder must be inspected, and
the Projectile Protector must be replaced.
Red Training Projectile #305-S (Fig. 5b) is designed for training or for repeated use
when deploying a line from the launch point to a hard surface as“ship-to-ship”line deployment.
The factory installed protective cover is manufactured from a low-recoil high-density urethane
material providing protection for the projectile and reducing projectile “bounce” on contact.
Luminescent Training Projectile #306-S (Fig. 5b) has factory installed luminescent
protective cover which combines the best features of high initial brightness and long afterglow
for visibility during nighttime use. The pigments used respond quickly to excitation by daylight,
incandescent light, uorescent, or ultraviolet light. This excitation process can be repeated
indenitely.
Note:
If the
Projectile
shows signs
of damage
it must be
removed
from service
immediately.
Climbing Grappling Hook #750
The Climbing Grappling Hook is manufactured from
titanium to provide the best balance between strength and
weight (Fig. 6). This Grappling Hook is used to establish a
climbing line, a tactical ladder, or to recover mooring lines,
and is certied for climbing by the Manufacturer. Loads
imposed on the hook should never exceed the design
rating. Each hook is treated with EFEX Sound Signature
Reducer.
Design Rating:
Ultimate Strength of 2,200 lbs / 1,000 kg.
Recommended loads not to exceed 730 lbs / 330 kg.
Figure 6 - Climbing
Grappling Hook #750
Note:
Custom Grappling
Hooks are
available on a
special order
basis.
Luminescent Training Projectile #306-S
Red Training Projectile #305-S

Tactical ResQmax Operation Manual
10
Climbing Line and Tactical Ladder Options
In addition to the Climbing Line and Tactical Ladder options shown, customized Climbing
Lines and Tactical Ladders are available to suit specic applications.
Pelican Transport/Storage Cases
#908 and #909
These unbreakable, watertight, dust-proof,
chemical resistant, and corrosion-proof cases
come with a lifetime guarantee. When equipped
with an extending handle and rollers, these cases
are used for transport and storage of your unit
(Fig. 9).
Figure 8 - Kit Carry Bag #906
Kit Carry Bag #906
The Kit Carry Bag is made from 1000-denier
Cordura fabric, with two external zippered
pockets, one internal zippered pocket, and a
weatherproof membrane over the entire footprint
(Fig. 8).
Figure 9 - Pelican Transport/Storage Case #908
Minimum Weight
Part # Description Break Load per Length Length
lbs kg lbs kg ft m
801 7mm Climbing Line
802 5.5mm Climbing Line
735 40ft / 12m Standard Ladder
744 50ft / 15m Tactical Ladder
5,780
3,200
7,500
4,800
2,622
1,451
3,400
2,177
4.0
2.6
5.2
5.8
1.8
1.2
2.4
2.6
165
328
40
50
50
100
12
15
Figure 7 -
Tactical Ladder
Tactical Ladder #735 and #744
Lightweight, durable, and acoustically covert. Constructed of high-tensity
nylon webbing with rungs at 12 in/30 cm on center, these Ladders are
available in 40 ft / 12m or 50 ft / 15m lengths which can be fully deployed
vertically (Fig. 7).
NOTE: Custom lengths are available upon request.