ResMed AirFit N30 User manual

ResMed.com/AirFitN30
Simplicity from the start
Introducing ResMed AirFit™ N30, the first nasal cradle mask in
the market with front-end tubing and our lightest option yet.*
It’s easy to use and well-balanced, with unique features
designed to maximise comfort and performance while
minimising facial contact. And because it’s small, simple, and
discreet¹, AirFit N30 aims to make staying on therapy easy.

46 minutes more sleep
A ResMed study conducted in 2019 showed that on average, CPAP users slept 46 minutes
longer each day with AirFit™ N30 compared to their current mask, AirFit P10.2†
QuietAir™vent technology
is designed to break up exhaled
air, spreading it out lightly to
minimise sleep disruptions.
QuickFit™elastic headgear
is designed to make fitting
easy. It aims to provide stability
and adjustability with minimal
facial contact.
Split straps allow you to
loosen or tighten the headgear
if needed.
Single side-clip
allows you to make minor
adjustments to the headgear,
if needed.
AirFit N30 highlights
Nasal cradle cushion
rests discreetly under
the nose, is curved for
comfort, and provides
an excellent seal for the
majority of CPAP users
who trialled in a ResMed
study in 2019.2∞ It is made
from a soft, lightweight
silicone that conforms to
the shape of the nose. Slim short tube
is designed to be small,
light, and flexible, offering
freedom of movement
without compromising seal.

Patient adherence is key
AirFit N30 is a well-balanced mask that has been created to have it all – a unique combination of comfort,
performance, and easy-to-use features packed into a simple and discreet minimalistic design.1And when
paired with ResMed myAir™‡, users can keep track of their therapy progress with a daily sleep score. With
the right mask and engagement level, users may feel empowered to take charge of their therapy, which can
help improve their therapy adherence.
Frame with QuietAir vent
64219
“It can’t get any
easier than this.”2
- AirFit N30 study participant
Headgear
64216
Cushion
64213 (S)
64214 (M)
64215 (SW)
Product codes ANZ
AirFit N30 Starter Pack includes: frame, headgear, and
cushions: S, M, SW 64206

* As of October 2019. Based on available user guide data. The total weight of AirFit N30, which includes the headgear and excludes the packaging, is 45g.
†Statistically significant differences (p <0.05) in median scores for average daily usage were found between the two masks.
∞ CPAP users rated subjective criteria for AirFit N30 on a Likert Scale of 0-10
1 ResMed guided external clinical study of 27 experienced CPAP mask users from 30 August to 11 September, 2019 in Sydney, AU who trialled ResMed AirFit N30 and a competitor nasal mask at home for 7 nights. CPAP users rated subjective
criteria for AirFit N30 and the competitor nasal mask on a Likert Scale of 0-10.
2 ResMed guided external clinical study of 17 evaluable CPAP mask users from 12–25 February, 2019 in Sydney, AU who trialled ResMed AirFit N30 at home for 7 nights in place of their prescribed mask, ResMed AirFit P10. AirFit, QuickFit
and QuietAir are trademarks and/or registered trademarks of the ResMed family of companies. For patent information, see ResMed.com/ip. Specifications may change without notice.
© 2019 ResMed. 10111638 2019-10
ResMed.com/AirFitN30
Fitting guide for AirFit N30
1
•To fix a mask leak, adjust the QuickFit
headgear by pulling it through the single
side-clip. Adjust it just enough for a
comfortable seal. Do not overtighten. You
may need to adjust the headgear over time.
• While holding the nasal cradle cushion
away from the nose, make sure the cushion
size (S, M or SW), and left (L) and right (R)
indicators are facing towards you. Place the
nasal cradle cushion under the nose.
•Pull the QuickFit™headgear over the head
by holding the bottom band and guiding it
around the back of the head. The top band
should sit comfortably on the crown of
the head.
• Briefly pull the nasal cradle cushion away
from the nose, and then place it back under
the nose to ensure the cushion fits well.
• To achieve a comfortable fit, spread the
split straps on the QuickFit headgear apart
to loosen the mask or draw them closer
together to tighten the mask.
• The mask is now fitted and ready to use.
For users with long hair, we recommend
feeding it through the back of the headgear.
If tied in a ponytail, it should sit high enough
to fit comfortably through the split strap on
the headgear.
Refer to the user guide for further instructions
and complete labeling information including
indications, contraindications, warnings
and precautions.
4 5 6
2 3