ReSound Ziga Lite ZL-61 User manual

1
Worldwide Headquarters
ReSound A/S
Lautrupbjerg 7
DK-2750 Ballerup, Denmark
Tel.: [phone]
Fax: [phone]
www.resound.com
Australia
GN ReSound Pty. Ltd.
Unit R1 Regent Park Estate
391 Park Road
Regent Park NSW 2143
Tel.: (free) 1800 658 955
Fax: [phone]
www.gnresound.com.au
17518500_GB_rev.A
Any issues relating to the EU Medical Device Directive
93/42/EEC should be directed to ReSound A/S.

ReSound Ziga LiteTM
USER GUIDE
ReSound Ziga LiteTM
BTE Models
ZL-61
ZL-71
ZL-81
17518500_GB_rev.A

1
ReSound Ziga LiteTM
Your new digital ReSound Ziga LiteTM hearing instruments will enable
you to hear sounds that you may not have heard in years because
of your hearing loss. Practice and a positive attitude are important
in learning to use hearing instruments. While some people adjust
quickly to wearing hearing instruments in their ears and hearing the
new sounds, other people may need more time.
The intent of this user guide is to provide information on the many
aspects of using hearing instruments. Your hearing instruments
have been adjusted to your hearing loss by your hearing care
professional. Familiarising yourself with the functions of your new
hearing instruments will help you get optimal benefit.
ReSound is a trademark of GN ReSound A/S.

2
Contents
Your ReSound Ziga LiteTM Hearing Instrument...........3
Adjusting to a World of New Sounds ......................4
How to adjust.........................................................4
How to Use the Hearing Instrument ........................5
Inserting the Instrument (with earmould) ...................5
Inserting the Instrument (with dome).........................6
Removing the Hearing Instrument ...........................6
Volume Control (optional) ........................................7
Programme Selector ..............................................7
Stand-by Function ..................................................8
Telephone Use ......................................................8
Using tele-loop systems..........................................8
Direct Audio Input (DAI) ...........................................9
Maintenance ..........................................................10
Cleaning the Earmould............................................10
How to Mount the Dome.........................................11
Tulip Dome.............................................................11
General Precautions ...............................................12
Repairs ..................................................................13
Technical Data........................................................14
Troubleshooting Guide............................................15

3
Your ReSound Ziga LiteTM Hearing Instrument
1. Programme Selector
2. Battery Compartment & On/Off Switch
3. Sound Outlet
4. 1st Microphone Sound Inlet
5. 2nd Microphone Sound Inlet
6. Volume Control (optional)
7. Direct Audio Input
8. Left/Right indicator (Right=Red, Left=Blue)
9. Battery lock
10. Model and serial number on ID-plate
11. Manufacturer
6
2
1
5
3
4
7
10
8/9
8/9
11
4
2

4
Adjusting to a World of New Sounds
New Sounds
A hearing loss is typically acquired gradually over many years.
You may have become accustomed to an everyday life with fewer
sounds, which also means hearing less noise than people with
normal hearing.
With your new hearing instruments you will experience many sounds
that you may not have heard for years. It will take time to get used to
all these sounds again. Some examples of these sounds are:
• Theclockticking
• Turningpagesofthenewspaper
• Children’svoices
• Whispersandsoftspeech
• Carnoise
• Birdsong
• Thesoundofyourownfootsteps
How to adjust
If you are inexperienced with hearing instruments it is advisable to:
1. Use your hearing instruments every day.
2. Wear your hearing instruments for just a couple of hours a day
during the first week.
3. Gradually increase the time you wear your hearing
instruments.
It can take several months for your brain to get used to all the “new”
sounds around you. Start using your hearing instruments in mainly
quiet surroundings and start with a comfortable volume (the hearing
care professional will ensure this). Listen to and get familiar with all
sounds in your home, such as a ticking clock, water running in the
sink, or silverware used on a plate. In quiet surroundings, converse
with a person you know well. Listen to a TV or radio at home. After
you have used the hearing instruments for a while you will be ready
for more demanding listening situations, like conversation with a
group of two or three people.

5
How to Use the Hearing Instrument
On/Off Function
1. When the battery compartment is fully closed, the instrument is
turned on and programme 1 will be activated.
2. To turn the instrument off, open the battery compartment. Many
individuals use their finger tips to pull it open.
3. The instrument is then switched off.
4. Whenever you are not using the instrument, remember to
open the battery door to turn the hearing instrument off to stop
battery consumption.
You can turn on your hearing instrument once you have placed it
behind your ear and inserted the tube in your ear. If you prefer not to
have the device ”on” while placing it behind your ear, your hearing
care professional can activate a function (SmartStart) which will
delay the instrument turning on. This function will prevent the hearing
instrument from squealing while the tube or mould is being inserted
in the ear. It delays the switch-on time by 10 seconds after closing
the battery compartment. A “beep” each second is presented
during this time.
Inserting the Instrument (with earmould)
1. Hold the earmould between your thumb and index finger and
position its sound outlet in your ear canal.
2. Slide the earmould all the way into your ear with a gentle,
twisting movement (insertion can be easier if you gently pull
your ear up and back with your other hand).
3. Turn the top-part of the earmould gently backwards and
forwards so that it tucks behind the fold of skin above your ear
canal.
4. Place the hearing instrument behind your ear.
5. Move the earmould up and down and press gently to ensure it
is positioned correctly in the ear.
6. When the earmould and hearing instrument are correctly
positioned, and you have not already turned it on, switch on
your instrument by closing the battery door.
Tip
Opening and closing your mouth can ease insertion.

6
Inserting the Instrument (with dome)
1. Place the hearing instrument behind the ear.
2. Hold the tube where it bends and gently push the dome into
your ear canal (the dome should be placed far enough into the
ear that the tube lies flush with your head).
3. It is important that the tube and the dome fit correctly into your
ear.
4. When the dome is placed correctly, you should not be able to
see the tube sticking out when you face a mirror.
Note
You should never attempt to bend or modify the shape of the tube.
Removing the Hearing Instrument
To remove the hearing instrument, simply pull the tube outward
with your thumb and forefinger. Consult your hearing care
professional if you have difficulties removing the hearing
instrument.

7
Volume Control (optional)
When using the instrument you can increase the volume by turning
the volume control up, and /or reduce the volume by turning it
down.
For each volume step, you will hear a “beep” signal indicating the
change. The loudness of the “beeps” will increase as you turn the
volume up and decrease as
you turn it down. If you reach
the upper or lower limit of the
volume control range, there will
be a more prominent “beep”
signal indicated by a lower
pitch.
Programme Selector
You can have up to four
different programmes on your hearing instrument. The selection of
programmes can be changed by your hearing care professional.
1. You can switch between programmes by pushing the
programme selector once.
2. You will then hear one or more “beeps”. The number of “beeps”
indicates which programme you have selected.
3. You can always return to programme 1 by turning your
instrument off and then on again, or by placing it in stand-by
mode and then returning to its operating mode.
Your Programme Environments:
(to be completed together your hearing care professional):
Programme Description of when to use
1
2
3
4

8
Stand-by Function
In stand-by mode, the hearing instrument will not process sound or
deliver an acoustic signal to the ear. When in this mode, a small
amount of power will be used. To put the instrument in stand-by
mode, hold down the programme selector for 5 seconds. You will
hear a series of “beeps” and the device will be in stand-by mode.
To return to standard mode, press the programme selector once.
This can only be done after at least 5 seconds in the stand-by
mode.
Telephone Use
You can use the telephone with
your hearing instruments. Using the
telephone while using your hearing
instruments may require some
practice.
By selecting the optional telecoil programme you can improve
understanding of speech when using a telecoil compatible
phone. Rather than picking up the sound from the telephone, this
programmeonlypicksupthetelephone’smagneticsignaland
converts it to sound. Your hearing care professional can activate the
telecoil.
When using the telecoil programme, the receiver of the telephone
should be held as shown in the drawing. You may need to move the
handset around slightly to find the best reception.
If you do not wish to have a telecoil programme, you may still use
the phone while using your hearing instrument. Hold the phone
close to the front microphone of the hearing instrument, but
not directly on it. If it whistles, it may take a few seconds for the
instrument to adapt. If the whistling continues, move the telephone
2-3 cm away from your ear. Some hearing instruments also have
an acoustic telephone program. This program might decrease
problems with acoustic feedback when using the telephone.
Using tele-loop systems
Many gathering places such as schools, theatres and houses of
worship, are equipped with tele-loop systems. To take advantage
of such a system, select the telecoil program to pick up direct
sound. If the hearing instrument goes dead when the telecoil
program is selected, the tele-loop system may not be turned on
or not operating correctly. If a school, theatre or house of worship
does not have a tele-loop system, try to sit as close as possible to
the front and use one of the microphone programmes.