ReSound ONE RT61-DRWC User manual

Quick guide
ReSound ONE
61 Rechargeable RIE

PROGRAM WHEN TO USE BEEPS
11
22
33
44
Programs:
(if set up by your hearing care professional)
Product: ReSound ONE
Model: RT61-DRWC
Serial number (R):
_______________________________
Serial number (L):
_______________________________
Battery size: Lithium-ion
My hearing aid information

E. LED light indicator
F. Microphones
G. Right/Left indicator
H. Serial number and model
G
H
A. Push button
B. Receiver
C. Open dome
D. Receiver wire
View ReSound’s hearing aid tutorial videos at youtube.com/resoundus.
Get to know your hearing aid
D
A
F
E
C
B

Your hearing aids are automatically
turned on when they are removed
from the hearing aid charger. They
can also be turned on and o manu-
ally by pressing the push button for 5
seconds.
What you need to know
Getting started: On/O function
SECONDS
Hearing aid charger
1. Hearing aid charging bay
2. Receiver bay
3. Left indicator (blue)
4. Right indicator (red)
5. Charging cable
6. Charging cable port
2
1
34
1
6
5

12
.
.
When charging
– blinking.
When fully charged
– on until removed.
Your hearing aids are fully charged
within 3 hours.
• While your hearing aids are
charging,the on/o light on your
hearing aid will blink slowly.
When fully charged, the light
remains on (not blinking)
until your hearing aid is removed
from the charger.
12
.
.
When charging
– blinking.
When fully charged
– on until removed.
Your hearing aids are fully charged
within 3 hours.
When charging – blinking
When fully charged –
on until removed
How to charge your hearing aids
Fully charge your hearing aids before
using them the first time
• Plug the power
adaptor into
a power
outlet and
connect the charging cable to
the hearing aid charger.
• Place both
hearing aids in
the charging
bays. The right
side is marke with a red dot and
the left side is marked by a blue dot.
• Place hearing aids so the receivers
go into the receiver bay.
.
.
.
.

Flight mode:
Some airlines prohibit the use
of wireless hearing aids (RF
transmitters) onboard.
To use Flight mode, make sure this is
activated by your hearing care profes-
sional.
Follow these steps to turn on Flight
mode:
1. Turn the hearing aid o.
2. Press the push button for 9
seconds.
3. The hearing aid responds with
four times double flashes and
double-dings for ten seconds.
To deactivate Flight mode:
1. Turn the hearing aids o and then
on.

2. Check that the dome is securely
mounted by carefully lifting the
lower part of the dome and ver-
ifying that the collar completely
covers the ribbed end of the wire.
When placed correctly, the dome
will appear slightly angled.
ReSound tulip domes
Tulip domes consist of two “petals”. It
is important that the largest petal is
the outermost petal. To ensure this:
1. Push the largest petal back, then
press the tulip dome over the
ribbed end of the receiver wire.
2. Then push the largest “petal”
back, and it will be
placed on top of
the smaller petal.
Daily: Clean your hearing aid.
Keep your hearing aids dry. Clean
the hearing
aids using a
soft cloth
or tissue.
Weekly: Clean the receiver tubes
and domes (B & C).
Use a soft cloth to clean the
receiver tube and dome on the
outside. Do not use water when
you are cleaning the receiver tubes.
As needed: Change domes (C)
ReSound standard domes
1. Push the new dome over the ribbed
end of the receiver wire.
Regular care & maintenance

2. Insertion: Insert the other end of
the tool into the sound outlet (the end
with the replacement filter). Gently
press the replacement straight into
the sound outlet until the outer ring is
touching the sound outlet. Pull the
tool straight out – your new wax filter
will remain in place. Re-attach your
dome or a
replacement
dome.
Monthly: Change the wax guard or
see your hearing care professional.
For changing white wax guards,
complete the following steps:
1. Removal: Remove the dome from
the receiver wire. Open the wax filter
case and take one of the tools out.
Each tool has a small hook in one end
and a new wax filter in the other. Insert
the removal tip into the used wax filter
and then pull the tool straight out. It is
important to pull it straight and not on
an angle.

View ReSound hearing aid tutorial videos at youtube.com/resoundus.
BEEP/TONE INDICATION ACTION REQUIRED
Ding, ding, ding, dong Low battery Charge battery
Ding (5 or 10) Hearing aid is starting up After dings cease, hearing aid
is turned on
Ding-ding,
ding-ding, etc.
Hearing aid is in flight mode Use in flight mode if desired,
or turn the hearing aids o
and then on
Ripple tone Hearing aid is in streaming
mode
Use with wireless
accessory or press the push
button to exit streaming
mode
If there are any other problems not mentioned in this guide, please contact ReSound
or your hearing care professional.
Beep/tone indicators

SYMPTOM CAUSE POSSIBLE REMEDY
No sound Blocked earmold or tube
Blocked wax guard
Clean earmold or tube
Replace wax guard or consult your hearing care professional
Not loud enough Blocked earmold or dome (C)
Change in hearing, volume too low
Excessive ear wax
Clean earmold, replace dome (C), replace guard
Consult your hearing care professional
Consult your hearing care professional
Excessive
whistling/feedback
Incorrect earmold placement
Incorrect dome (C) placement
Excessive ear wax
If none of the above
Re-insert earmold carefully
Re-insert dome (C)
Clean guard/consult your hearing care professional
Consult your hearing care professional
Wireless does not work Device may be in flight mode Turn the hearing aid o and then back on
Hearing aid is not
charging
Does the hearing aid sit correctly in the
charger?
Is the hearing aid charger charged?
Reinsert the hearing aid in the charger.
Plug the charger into a power outlet and connect the
charger cable to the hearing aid charger.
Troubleshooting