ReSound Danalogic Ambio BTE User manual

Turning on/o and
Changing baeries
The right choice for the NHS
Turning on and o
Turning the hearing device on
Close the baery drawer completely to
switch your hearing device on.
Turning the hearing device o
Open the baery drawer unl a click is felt
to turn your hearing device o.
Changing baeries
Baery size and colour:
When the baery power is low
• The hearing device will beep when the
baery power gets too low.
• The signal will repeat every 15 minutes
unl the hearing device automacally
turns o.
UK 06.49 A 6.2018
On
O
On
O

The right choice for the NHS
Audiologist contact details:
Turning on/o and Changing baeries (connued)
To change the baery
• Remove the scky label from the
new baery.
• Open the baery drawer.
• Remove the dead baery by pulling
it upwards.
• Insert the new baery in it’s place.
Make sure that the at side (marked+)
is facing upwards.
iTo save the baery, make sure you turn
your hearing device o when you are
not using it.
Your hearing device has been set up to
beep when the baery needs changing.
Yes No
UK 06.49 A 6.2018