Retekess TR604W User manual

TR604W
FM/AM/WB 3 Band Radio
User Manual

WARNING
There may be electric shock dangerous when you don’t operate or use this machine correctly, please strictly
operate in accordance with its regulations. Except for the authorized repairing personnel, never open the back
cabinet arbitrarily so as to avoid the dangerous of electric shock.
Please don’t expose the unit under the rain or humid place, prevent from water and spray. Don’t put anything
which fill with liquid like vase etc above this unit.
Please don’t press or bend the AC cord of the unit, in case of the copper inside the AC cord break
and lead to open circuit.
When fall across thunderstorm or you don’t use this machine for a long time, please do pull out the AC plug.
Please pull out the batteries when don’t use DC power supply, so as to avoid batteries electronic leak liquid
corroding the radio.
Don’t use the batteries combined with new and old, or different category. Please put he dumped batteries on
the place where indicate by government to avoid environment pollution.
1 2
1.Handle
2.FM antenna
3.Dial scale
5.Power indicator
4.Dial pointer
6.Volume control &
Power switch
7.Band switch
8.High&Low tone
9.Tuning knob
10.Earphone jack
12.Battery door
11.AC socket
9
10
11
12
3 4 5
6
7
8

1. This unit has the function of AC&DC available power supplying, AC voltage is 110V 60Hz, DC voltage is
4.5V (3x1.5V R20/D size ) .
2. When use the AC power, please connect the inlet of the AC cord with the socket jack (11), and put the plug
of the AC cord into power board or the power socket on the wall.
3. When use the DC power, please operate as the following procedures;
1) Push down the battery doorlocks by hands and take apart the battery door (12).
2) Aiming the polarity of the battery, put into 3 pcs 1.5V R20/D size.
3) Closed the battery door.
Local Government Regulations
When radios are used as a consequence of employment, the Local Government Regulations requires users
to be fully aware of and able to control their exposure to meet occupational requirements. Exposure
awareness can be facilitated by the use of a product label directing users to specific user awareness
information. Your Retekess radio has a RF Exposure Product Label. Also, your Retekess user manual, or
separate safety booklet includes information and operating instructions required to control your RF exposure
and to satisfy compliance requirements.
POWER SUPPLY
RADIO OPERATION
1. Move the power switch (6) between on and off to control.
2. Move the band switch (7) to the band you want to listen: AM or FM or WB, after band selected, turn the tuning
knob (9) and watch the dial pointer (4) on dial scale (3) to search your desired station program.
3. Use volume control (6) to regulate the large or small volume of the sound.
4. Use high & low tone (8) for your preference.
5. You can see earphone to listen to radio in case of disturb other people. Insert the earphone plug into
“earphone jack” (10).
ANTENNA OPERATION
1. When listen to FM or WB, please pull out the FM antenna (2) to obtained the best effect.
2. When receiving AM, it's using the internal magnetic antenna, you can get the optimum reception by rotating
the direction of the radio.
MAINTENANCE
1. Please put this unit at well ventilated place, don’t use it in high temperature or humid environment.When main-
tain this radio, please clean up this machine with soft cloth, but with out any lubricant,alcohol etc volatile liguid.
2. The machinery parts of this machine have been fully lubricated by factory before delivery.
WARNING
RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE
Before using this radio, read this guide which contains important operating instructions
for safe usage and RF energy awareness and control for compliance with applicable
standards and regulations.
Just to be on the safe side, please pull out the AC plug from power supplying before installing batteries.
Please try to use the AC power supplying due to because the time is limited for batteries proving power.
NOTICE

Unauthorized modification and adjustment
Changes or modifications not expressly approved by the party responsible for compliance may void the user’s
authority granted by the local government radio management departments to operate this radio and should not
be made. To comply with the corresponding requirements, transmitter adjustments should be made only by or
under the supervision of a person certified as technically qualified to perform transmitter maintenance and
repairs in the private land mobile and fixed services as certified by an organization representative of the user of
those services.Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the
local government radio management departments equipment authorization for this radio could violate the rules.
FCC Requirements:
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CE Requirements:
• (Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co.,Ltd declares that the radio
equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive
2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU
declaration of conformity is available at the following internet address: www.retekess.com.
• Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in
the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable
batteries) must be taken to designated collection locations at the end of their working life. Do not
dispose of these products as unsorted municipal waste. Dispose of them according to the laws in
your area.
IC Requirements:
Licence-exempt radio apparatus
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
RF Warning Statements
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.
RF Exposure Information
• DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also
cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the
manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna
gain shall not exceed the specified gain by the manufacturer declared.

• To avoid interference, turn off the radio in areas where signs are posted to do so.
• DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as
hospitals, aircraft, and blasting sites.
Avoid Choking Hazard
Small Parts. Not for children under 3 years.
Protect your hearing
• Use the lowest volume necessary to do your job.
• Turn up the volume only if you are in noisy surroundings.
• Turn down the volume before adding headset or earpiece.
• Limit the amount of time you use headsets or earpieces at high volume.
• When using the radio without a headset or earpiece, do not place the radio's speaker directly against
your ear
• Use careful with the earphone maybe possible excessive sound pressure from earphones and
headphones can cause hearing loss
Note: Exposure to loud noises from any source for extended periods of time may
temporarily or permanently affect your hearing. The louder the radio's volume, the less
time is required before your hearing could be affected. Hearing damage from loud noise
is sometimes undetectable at first and can have a cumulative effect.
Approved Accessories
• This radio meets the RF exposure guidelines when used with the Retekess accessories supplied or
designated for the product. Use of other accessories may not ensure compliance with the RF
exposure guidelines and may violate regulations.
• For a list of Retekess-approved accessories for your radio model, visit the following
website: http://www.Retekess.com
WARNING
WARNING

Model Number:
Serial Number:
Purchasing Date:
Dealer: Telephone:
User’s Name: Telephone:
Country: Address:
Post Code: Email:
Remarks:
1.This guarantee card should be kept by the user, no replament
if lost.
2.Most new products carry a two-year manufacturer’s warranty
from the date of purchase.
3.The user can get warranty and after-sales service as below:
• Contact the seller where you buy.
• Products Repaired by Our Local Repair Center
4.For warranty service, you will need to provide a receipt proof
of purchase from the actual seller for verification
Exclusions from Warranty Coverage:
1.To any product damaged by accident.
2.In the event of misuse or abuse of the product or as a result of
unauthorized alterations or repairs.
3.If the serial number has been altered, defaced, or removed.
Guarantee

Henan Eshow Electronic Commerce Co., Ltd
Add: 7/F, Sanjiang Building, No.170 Nanyang Road, Huiji District,
Zhengzhou, Henan, China
Facebook: facebook.com/Retekess
E-mail: [email protected]
Web: www.retekess.com MADE IN CHINA

尺寸：120*160mm
印刷：黑白印刷
装订：骑马订
纸张材质：胶合纸
本页无需印刷
说明书要求