Rev-a-shelf 4pil-tri-0216 User manual

INSTALLATION INSTRUCTIONS: PILASTER DRAWER BOX SYSTEM

12400 Earl Jones Way

Louisville, KY 40299

rev-a-shelf.com

Customer Service: 800-626-1126

4PIL SERIES PILASTER DRAWER BOX SYSTEM INSTRUCTIONS

TOOLS REQUIRED:

45 MIN

ESTIMATED ASSEMBLY TIME:

CARE AND MAINTENANCE:

Clean with a damp cloth and

wipe parts dry.

I-4PIL-TRI-0216

VIDEO INSTRUCTIONS: WWW.REV-A-SHELF.COM/VIDEOS

Parts List

No. Description Qty

1 Pilaster Uprights (front of cabinet) 2

2 Pilaster Uprights (back of cabinet) 2

3 #8 x 3/4” Deep Thread Screws

(Screw Pack #059)

4 #6 x 1/2” Wood Screws

(Screw Pack #084)

5 Upright Safety Cap 4

6 Slide button/screw set 2/Set

7 BLUM®Slides 1

8 Wood Box (Short) 1 or 2

9 Wood Box (Tall) 1

10 BLUM®Triggers 2/Set

11 Wood Pegs (Tall Box Only) 5

12 Wire Dividers 5













 

 



 











   













 

 



 











   













 

 



 











   

1 2

3 4 5 6

7 8 9 10 11 12

Customer Service: 800-626-1126 | rev-a-shelf.com

Refer to the included template

to attach your Pilaster Upright

Kit. (See Fig 1.1)

Before attaching the L-bracket

to the wall with the provided

#8x3/4 phillips truss head

deep thread screws, ensure

the machine screws that attach

the uprights to the bracket are

loose. (See Fig 1.2)

Each slide set is to be tted

with 1 pilaster button kit. Using

the 4 screws and buttons

included, attach the buttons

through the indicated holes

shown. (See Fig 2)

NOTE: The slides used in the

Rev-A-Shelf Pilaster System are

BLUM 563H53301B

STEP 1

STEP 2

FIGURE 2

FIGURE 1.1 FIGURE 1.2

INSTALLING THE

PILASTER UPRIGHTS

ATTACHING THE

BUTTONS

SLIDE BUTTON POSITIONS

SECURE BUTTONS WITH

PROVIDED SCREWS

ENSURE ALL

SCREWS ARE LOOSE

L-BRACKET

INSTALLATION INSTRUCTIONS: PILASTER DRAWER BOX SYSTEM 3

Locate the desired hole

locations for the pilaster

buttons to be inserted.

Insert the button attached to

the rear of the slide into the

back Pilaster Upright slot. Drop

the front slide button into the

center of the front upright slot

and press down to secure the

slide. (See Fig 3)

With the wood box upside

down, locate the front of

the box by identifying the

pre-drilled holes. Ensure the

triggers are on the correct side

before attaching the 4 #6x1/2

phillips pan head deep thread

wood screws. (See Fig 4)

Once the triggers are attached,

place the wood box on top of

the BLUM®slides and slowly

push the wood box back.

When the slides have fully

engaged, you will hear a click

sound (See Fig 5). At this point,

tighten the screws connecting

the uprights to the L-Brackets

from Step 1 (See Fig1.2).

NOTE: You will also use these

triggers to disengage the

wood boxes from the pilaster

system when necessary.

FIGURE 3

FIGURE 4

FIGURE 5

STEP 3

STEP 4

HANGING SLIDES

ON UPRIGHTS

DRAWER BOX

PREPARATION

Pre-drilled

holes

Drawer bottom

after trigger

installation.

Front of box

Push until you hear

a clicking sound

Front of box

BLUM Triggers

SLIDE INTO PLACE

ROTATE FRONT OF THE

SLIDE SO IT FITS INTO THE

FRONT PILASTER UPRIGHT.

Customer Service: 800-626-1126 | rev-a-shelf.com

12400 Earl Jones Way

Louisville, KY 40299

rev-a-shelf.com

Customer Service: 800-626-1126

Remove the screws that attach

the four extension brackets to

the top of any pilaster uprights

that aren’t currently being used

as extensions (See Fig 8.1).

Place the end caps on the top

of the uprights (See Fig 8.2).

NOTE: If you don’t intend on

extending the pilaster system

as shown in Figure 6, please

skip to Step 6

Please ensure you have enough

vertical space in your cabinet/

pantry before continuing (See

Fig 6).

Remove the two top screws

from the lower set of Pilaster

Uprights (See Fig 7).

Stack the new Pilaster Upright

on top of the bottom one

and attach uprights using the

previously removed screws.

Attach the top Pilaster Upright

to the wall using the wood

screws provided.

STEP 6

STEP 5

PLACING END CAPS

ON THE UPRIGHTS

UPRIGHT EXTENSION

INSTRUCTIONS

FIGURE 7

FIGURE 6

FIGURE 8.1 FIGURE 8.2

473

/32”

NOTE: This dimension

assumes you have a

tall wood box on the

top of your extended

pilaster system.

REMOVE SCREWS, INSERT

THE NEW PILASTER UPRIGHT,

AND REATTACH SCREWS

ATTACH AND PRESS FIRMLY

REMOVE SCREWS

REMOVE EXTENSION BRAKCET

Table of contents

Other Rev-A-Shelf Indoor Furnishing manuals

Rev-A-Shelf

Rev-A-Shelf 448TP User manual

Rev-A-Shelf

Rev-A-Shelf 5UPD User manual

Rev-A-Shelf

Rev-A-Shelf 5322BCSC11GR User manual

Rev-A-Shelf

Rev-A-Shelf R.4WV.15WN User manual

Rev-A-Shelf

Rev-A-Shelf 4WKB Series User manual

Rev-A-Shelf

Rev-A-Shelf Elite 53PSPE Series User manual

Rev-A-Shelf

Rev-A-Shelf GLIDEWARE GLD Series User manual

Rev-A-Shelf

Rev-A-Shelf 5WB-DMKIT User manual

Rev-A-Shelf

Rev-A-Shelf CVRI Series User manual

Rev-A-Shelf

Rev-A-Shelf 5300 Series User manual

Rev-A-Shelf

Rev-A-Shelf 434 User manual

Rev-A-Shelf

Rev-A-Shelf 5374 Series User manual

Rev-A-Shelf

Rev-A-Shelf 445 Series User manual

Rev-A-Shelf

Rev-A-Shelf 5743 User manual

Rev-A-Shelf

Rev-A-Shelf 5708 User manual

Rev-A-Shelf

Rev-A-Shelf 5707 User manual

Rev-A-Shelf

Rev-A-Shelf SIDEMOUNT PULLOUT 150 MM User manual

Rev-A-Shelf

Rev-A-Shelf 432 Series User manual

Rev-A-Shelf

Rev-A-Shelf 486 Series User manual

Rev-A-Shelf

Rev-A-Shelf 445VBOSC8C User manual

Rev-A-Shelf

Rev-A-Shelf CO Series User manual

Rev-A-Shelf

Rev-A-Shelf RS4TT-2133-1 User manual

Rev-A-Shelf

Rev-A-Shelf TWO-TIER FILE DRAWER SYSTEM User manual

Rev-A-Shelf

Rev-A-Shelf 4WKB-1 User manual

Popular Indoor Furnishing manuals by other brands

Regency

Regency LWMS3015 Assembly instructions

Furniture of America

Furniture of America CM7751C Assembly instructions

Safavieh Furniture

Safavieh Furniture Estella CNS5731 manual

PLACES OF STYLE

PLACES OF STYLE Ovalfuss Assembly instruction

Trasman

Trasman 1138 Bo1 Assembly manual

Costway

Costway JV10856 manual

moss DESIGN

moss DESIGN Caisson Credenza Assembly instructions

Aquaglide

Aquaglide FULL DECK 15.0 owner's manual

AREBOS

AREBOS AR-HE-SW30 user manual

Till-Hilft

Till-Hilft Fulda 87005.330 Assembly instructions

Twoey Outside

Twoey Outside 2010 quick start guide

Hettich

Hettich Easys 200 operating instructions

The bedboss

The bedboss RELAX 404 Series owner's manual

Oeseder Möbelindustrie

Oeseder Möbelindustrie Bern 991 720 Assembly instructions

Costway

Costway HW68469 user manual

Next ALIX A27743 Assembly instructions

BROSA

BROSA Hans Assembly guide

Prodigg

Prodigg MINIKA PBA015T-FUR installation manual

Rev-A-Shelf 4PIL-TRI-0216 User manual

Popular Indoor Furnishing manuals by other brands