4
Waste Electrical and Electronic
Equipment (WEEE)
At the end of its useful life, your product is considered to be
WEEE. As such, it is important to note that: WEEE is not to be
disposed of as unsorted municipal waste. It is to be collected
separately such that it can be disassembled so its components
and materials can be recycled, re-used, and recovered (burned
for energy content in the production of electricity).
Public collection points have been set up by municipalities for the
collection of WEEE, free of charge to you.
Please return your WEEE to the collection facility nearest your
home or oce.
If you have diculty locating a collection facility, the retailer that
sold you the product should accept your WEEE.
If you are no longer in contact with your retailer, please contact
ACCO for assistance with this matter.
Recycling of WEEE is geared toward protecting the environment,
protecting human health, preserving raw materials, improving
sustainable development, and ensuring a better supply of
commodities in the European Union.This will be achieved by
retrieving valuable secondary raw materials and reducing the
disposal of waste.You can contribute to the success of these
goals by returning your WEEE to a collection facility.
Your product is marked with the WEEE symbol (wheelie bin with
an X through it).This symbol is to inform you that the WEEE is not
to be disposed of as unsorted municipal waste.
• Only use the unit for its intended purpose.
• The unit must only be connected to a supply voltage
corresponding to the electrical rating shown on the unit.
• Unit should be connected to a socket outlet near the equipment
that is easily accessible.
• Do not connect to multi adaptors or use with an extension cable.
• Failure to follow these instructions could result in damage/injury
and will invalidate your warranty.
• Do not attempt to service or repair the unit yourself.
• In the event of a fault, unplug the unit and contact an authorised
Rexel service representative for any required repairs.
• If recycling, separate paper and credit card shreds.
• Do not use this unit if the cable or plug have been damaged.
• Power cord must be connected to a socket-outlet with earthing
connection.
• Unplug this equipment when not in use for an extended period
of time.
Please note, the maximum sheet capacity may vary due to
factors such as paper density, texture and humidity.
Warranty
Operation of this machine is warranted for two years from date
of purchase, subject to normal use. Within the warranty period,
ACCO Brands Europe will at its own discretion either repair or
replace the defective machine free of charge. Defects due to
misuse or use for inappropriate purposes are not covered under
the warranty. Proof of date of purchase will be required. Repairs
or alterations made by persons not authorised by ACCO Brands
Europe will invalidate the warranty. It is our aim to ensure that our
products perform to the specications stated. This warranty does
not aect the legal rights which consumers have under applicable
national legislation governing the sale of goods.
This warranty does not apply to Australian customers - see
warranty on page 21.
Accessories
Only use Rexel accessories:
Oil Sheets (20) - 2101949
Oil Sheets (12) - 2101948
Indicators
Cooling down
Please read and keep these important
safety instructions
For a copy of the operating instructions,
hints & tips and troubleshooting guide,
please visit www.rexeleurope.com
The following symbol which is
found on the product indicates
you could be seriously hurt or
killed if you open the machine.
DO NOT OPEN.
Electrical shock hazard.
Do not open. No user
serviceable parts inside.
Refer servicing to qualied
service personnel.
WARNING
m
c
Keep long hair clear
This equipment is not intended for use by children
Keep loose jewellery clear
Manual feed slot capacity
Will accept small paperclips
Ties and loose clothing hazard
No aerosols
Do not reach into opening
Will accept small staples
No oil, use Rexel oil sheets only
Warning symbols
No CDs
6
Warning: Moving parts hazard, keep hands away from
rollers whilst in operation.
Warning: Do not touch cutters, beware of sharp edges.
