RGBlink C1US User manual

1
C1US
USER MANUAL
Article No:RGB-RD-UM-C1US E001
Revision No:V1.0

C1US User Manual
2
CONTENT
Declarations................................................................................ 4
FCC/Warranty..................................................................... 4
Operators Safety Summary................................................. 6
Installation Safety Summary...........................................8
Chapter 1 Your Product.............................................................. 9
1.1 In the Box.................................................................... 9
1.2 Product Overview.................................................... 10
1.2.1 Rear Panel.....................................................11
1.2.2 Front Panel....................................................13
1.2.3 Dimension......................................................14
Chapter 2 Installing Your Product........................................15
2.1 Plugging in Signals..................................................15
2.2 Plugging in Main Power..........................................15
2.3 Turning on Your Product.........................................15
Chapter 3 Using Your Product............................................. 16
3.1 Using the MENU Button............................................ 16
3.2 Understanding the MENU Structure.......................... 17
3.3 Using the Menu........................................................18
3.3.1 Default Menu.................................................18
3.3.2 Main Menu.....................................................20
3.3.3 INPUT.............................................................21
3.3.4 OUTPUT........................................................ 23
3.3.5 TRANSITION................................................ 26
3.3.6 SPLIT..............................................................27
3.3.7 SYSTEM........................................................ 28
3.3.8 FACTORY RESET....................................... 30
3.4 Output Resolution Setting...................................... 31

C1US User Manual
3
3.4.1 Select Output Resolution............................ 31
3.4.2 Customize Output Resolution.................... 32
3.5 Scale.......................................................................... 35
3.6 Input Sizing Adjust................................................... 36
3.7 Single Picture Switching.........................................38
3.8 【PIP】Picture In Picture...................................... 39
3.9 SPLIT Setting........................................................... 41
3.10 TEXT OVERLAY Setting...................................... 43
3.11 Screen Size Setting...............................................46
3.12 【TAKE】Button.................................................... 48
3.13 TRANISITION........................................................ 49
3.14 AUDIO Setting..........................................................51
3.15 BLACK OUT Setting................................................52
3.16 FREEZE.................................................................... 54
3.17 【BRI】Image Adjustment..................................... 55
3.18 【SAVE】Save Settings......................................56
3.19【LOAD】Recall Saved Settings.......................... 57
CHAPTER 4 ORDERING CODES.................................................. 58
4.1 PRODUCT................................................................ 58
4.2 OPTIONS...................................................................58
4.2.1 Input Options................................................ 58
CHAPTER 5 Support .............................................................. 59
5.1 Contact Us...................................................................59
CHAPTER 6 APPENDIX....................................................... 60
6.1 Specification................................................................60
6.2 Upgrade Device...........................................................69
6.3 Terms & Definitions.....................................................70

C1US User Manual
4
Thank you for choosing our product!
This User Manual is designed to show you how to use this
video processor quickly and make use of all the features.
Please read all directions and instructions carefully before
using this product.
Declarations
FCC/Warranty
Federal Communications Commission
(FCC) Statement
This equipment has been tested and found to comply with the
limits for a class A digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area may cause harmful interference, in which case the user
will be responsible for correcting any interference.
Guarantee and Compensation

C1US User Manual
5
RGBlink provides a guarantee relating to perfect
manufacturing as part of the legally stipulated terms of
guarantee. On receipt, the purchaser must immediately
inspect all delivered goods for damage incurred during
transport, as well as for material and manufacturing faults.
RGBlink must be informed immediately in writing of any
complains.
The period of guarantee begins on the date of transfer of risks,
in the case of special systems and software on the date of
commissioning, at latest 30 days after the transfer of risks. In
the event of justified notice of compliant, RGBlink can repair
the fault or provide a replacement at its own discretion within
an appropriate period. If this measure proves to be impossible
or unsuccessful, the purchaser can demand a reduction in the
purchase price or cancellation of the contract. All other claims,
in particular those relating to compensation for direct or
indirect damage, and also damage attributed to the operation
of software as well as to other service provided by RGBlink,
being a component of the system or independent service, will
be deemed invalid provided the damage is not proven to be
attributed to the absence of properties guaranteed in writing
or due to the intent or gross negligence or part of RGBlink.
If the purchaser or a third party carries out modifications or
repairs on goods delivered by RGBlink, or if the goods are
handled incorrectly, in particular if the systems are
commissioned operated incorrectly or if, after the transfer of
risks, the goods are subject to influences not agreed upon in
the contract, all guarantee claims of the purchaser will be

C1US User Manual
6
rendered invalid. Not included in the guarantee coverage are
system failures which are attributed to programs or special
electronic circuitry provided by the purchaser, e.g. interfaces.
Normal wear as well as normal maintenance are not subject to
the guarantee provided by RGBlink either.
The environmental conditions as well as the servicing and
maintenance regulations specified in this manual must be
complied with by the customer.
Operators Safety Summary
The general safety information in this summary is for operating
personnel.
Do Not Remove Covers or Panels
There are no user-serviceable parts within the unit. Removal of
the top cover will expose dangerous voltages. To avoid
personal injury, do not remove the top cover. Do not operate
the unit without the cover installed.
Power Source
This product is intended to operate from a power
source that will not apply more than 230 volts rms
between the supply conductors or between both
supply conductor and ground. A protective ground
connection by way of grounding conductor in the
power cord is essential for safe operation.

C1US User Manual
7
Grounding the Product
This product is grounded through the grounding conductor
of the power cord. To avoid electrical shock, plug the
power cord into a properly wired receptacle before
connecting to the product input or output terminals. A
protective-ground connection by way of the grounding
conductor in the power cord is essential for safe
operation.
Use the Proper Power Cord
Use only the power cord and connector specified for your
product. Use only a power cord that is in good condition. Refer
cord and connector changes to qualified service personnel.
Use the Proper Fuse
To avoid fire hazard, use only the fuse having identical type,
voltage rating, and current rating characteristics. Refer fuse
replacement to qualified service personnel.
Do Not Operate in Explosive
Atmospheres
To avoid explosion, do not operate this product in an explosive
atmosphere.

C1US User Manual
8
Installation Safety Summary
Safety Precautions
For all C1US processor installation procedures, please observe
the following important safety and handling rules to avoid
damage to yourself and the equipment.
To protect users from electric shock, ensure that the chassis
connects to earth via the ground wire provided in the AC
power Cord. The AC Socket-outlet should be installed near the
equipment and be easily accessible.
Unpacking and Inspection
Before opening C1US processor shipping box, inspect it for
damage. If you find any damage, notify the shipping carrier
immediately for all claims adjustments. As you open the box,
compare its contents against the packing slip. If you find any
shortages, contact your sales representative.
Once you have removed all the components from their
packaging and checked that all the listed components are
present, visually inspect the system to ensure there was no
damage during shipping. If there is damage, notify the shipping
carrier immediately for all claims adjustments.
Site Preparation
The environment in which you install your VENUS X1 should be
clean, properly lit, free from static, and have adequate power,
ventilation, and space for all components.

C1US User Manual
9
Chapter 1 Your Product
1.1 In the Box
Note:
AC Power Cable supplied as standard according to destination
market.
AC Power Cord
DVI to HDMI
Cord
USB Cable

C1US User Manual
10
1.2 Product Overview
C1US is a multiple outputs video process that accepts a wide
variety of video signals, including DVI, VGA, HDMI, CVBS and
SDI. It also supports an optional input to meet users’ actual
need.
Its front panel is easy and convenient to operate and rear panel
is equipped with two sending card slots for flexible sending
card installation.
C1US support multiple cascade, analog audio input and output,
EDID edit on input port and read on output port. Users can do
EDID editing on input port according to the output resolution
to optimize the input resolution. USB input module can be
selected as option different from USB control, U-disk is used as
input source. C1US with USB input module can be used as
signal generator to further meet user’s application needs.
C1US SYSTEM CONNECTION DIAGRAM

C1US User Manual
11
1.2.1 Rear Panel
INPUT CONNECTORS
1
SDI in and SDI loop
2
Optional input module area
3
VGA/YP Input DB15 port
5
Audio input
11
CVBS input BNC port
12
HDMI and HDIMI loop
13
DVI input

C1US User Manual
12
OUTPUT CONNECTORS
4
DVI output DVI-I port
6
Audio output
CONTROL PORT
10
USB-A
RS232
OTHERS
7
Sending card slots
POWER
8
Power switch
9
Power IEC-3

C1US User Manual
13
1.2.2 Front Panel
FRONT PANEL
LCD
Show operation and
menu items
ME
NU
Menu and back button
Kno
b
Confirm and Select
button,functioned by
MO
DUL
Optional Input module
selection area
OK
OK button
CVB
S
Select CVBS input signal
SAV
E
Save current settings
as preset
VGA
Select VGA and YPbPr
input signal
FREE
ZE
Freeze current screen
HD
MI
Select HDMI input signal
SACL
E
Scale
DVI
Select DVI input signal
PIP
Picture in picture
SDI
Select SDI input signal
FS
Full screen
TAK
E
Switch mode
BRI
Image adjustment
0~9
Numeral button , for
scaling and self-defined
LOA
D
Load the saved
setting

C1US User Manual
14
1.2.3 Dimension
Following is the dimension of C1US for your reference:：

C1US User Manual
15
INPUT: HDMI
NO INPUT
OUTPUT:1920x1080@60
VER:1.38
Chapter 2 Installing Your
Product
2.1 Plugging in Signals
Connect signals to the product (ensure all devices are powered
off first). Tighten connector screws/locks where provided.
2.2 Plugging in Main Power
Connect IEC cable to device and plug into wall socket. Turn on
power at wall socket.
2.3 Turning on Your Product
Turn the power switch on the rear to ON position.
TST screen shows as below，meanwhile the device enter
initializing state after that，the device will load the previously
saved setting. On delivery, the default input is HDMI at
resolution 1920x1080@60.

C1US User Manual
16
Chapter 3 Using Your
Product
3.1 Using the MENU Button
Push【MENU】button to enter main menu.
Turn the knob to select corresponding menu item.
The symbol >indicate that the item is selected.
Push the knob or【OK】button to confirm the operation.
The symbol＊means the selected item is under editing state,
ready to be set or checked
The operation diagram is as follows：

C1US User Manual
17
3.2 Understanding the MENU
Structure
The MENU structure is shown in the figure below:

C1US User Manual
18
INPUT: HDMI
NO INPUT
OUTPUT：1920x1080@60
VER：1.38
3.3 Using the Menu
Use the menu system for convenient and intuitive operation.
C1US TST display shows the menu items. The TST display will
show the default state when the menu is not in use, or the
operation has timed out. Using the 【MENU 】button and
rotary knob in the front panel, the TST display will show the
corresponding menus according to user selections.
3.3.1 Default Menu
Turn the power switch on the rear to ON position.
After the device initializing the TST screen shows below:

C1US User Manual
19
Here are details of Default Menu：
1
INPUT
Show the format and resolution of currently selected
input source.
2
OUTPUT
Show current output resolution. Users can select
3
VER
Show current software of the device
4
ICON
Show the current setting of the device, such as freeze,
picture in picture,splitting

C1US User Manual
20
3.3.2 Main Menu
Push the【MENU】button in the default state and turn the
rotary knob, the TST display will show the main menus as
below：
There are 6 menu items in the main menu, and display in 2
pages. Turn the rotary knob, and select any menu above, push
the rotary knob or 【OK】button to confirm, the TST display
will show the sub-menu. If push the【MENU】button, it will
return to the last level menu.
>INPUT >>
OUTPUT >>
TRANSITION >>
SPLIT >>
SYSTEM >>
>FACTORY RESET >>