RGBlink mini pro User manual

1
Quick Start

mini-pro Quick Start
2
Connect mini-pro to power plug by the link
cable.
Install Your Product
Push the Power button on the rear panel,the device
will enter to the boot interface within 10S.
Connect PC,laptop,camera or DVD to mini-pro’s
HDMI IN port via HDMI cable.
Connect the laptop to mini-pro’s USB 3.0 port via
USB cable, and mini-pro will be captured as a
webcam source.
Connect the microphone to mini-pro’s Audio IN
port and connect the speaker or earphone to
Audio OUT port.
Connect mini-pro’s LAN port to laptop via CAT6
cable, and control mini-pro on software.
Connect mini-pro’s USB 3.0 port to your laptop
to stream and record.
Connect mini-pro HDMI OUT port to monitor to
HDMI preview the input and output.

mini-pro Quick Start
3
Touch Screen
Switch Source
Switch Effect Setting
Switch Duration Setting
Touch screen also has some simple swipe
shortcut functions.
Push corresponding icon and the 2-inch LCD
screen will enter corresponding interface.
When four signal sources plug in, the lights on the signal
source buttons will appear in four states:
Steady green: The signal is recognized and no operation is
performed;
Flashing green: The currently selected signal is ready to be
switched;
Steady red: The current signal is in PGM output;
Unlit: No signal source is connected or the resolution of the
signal source connected is not accepted.
Select the effect, the root directory icon will
be replaced with the last selected icon.
Touch【Transition】icon to enter the menu.
You can select Fast or T-BAR and set the
duration time
Touch【Duration】icon to enter the menu.
mini-pro is default 0.5S Fast Fade mode, by
pushing ①②③④signal buttons, 4 input signals
can be switched in fast fade mode.

mini-pro Quick Start
4
Push button【M】to return to main menu and find
【Output】to set parameters for the HDMI output.
When the touch screen in 4-screen preview, use
joystick left and right to switch between
multi-screen PST and PGM, use joystick up and
down to switch the 4 input source.
USB 3.0 output recognized as WEBCAM on
computer defaults to be PGM which can be
changed to multi-screen PST or TP (Test Pattern).
Push button【M 】to return main menu and
select【Output】to do WEBCAM setting.
Tap【Audio】to enter the sound setting interface.
HDMI output defaults multi-screen preview,
which can be switched to PGM or the 4 input
content in field application.
The audio output can be turned on or off, and
the volume can be adjusted by sliding the bar.
Push button【M】again when the touch screen is in
main menu interface and touch screen will enter
4-screen input source preview.
HDMI Output
USB3.0 Output
Audio Setting

mini-pro Quick Start
5
If the sound and the video are not synchronous,
increase or reduce the Delay value under AFV.
Turn on AFV, the audio follows the video switch
to perform a soft gradual transition when video
is switched.
When the touch screen is in the main interface/
preview interface/Shortcut interface, the PGM
audio volume can be adjusted by the Up/Down
keys.
Press button 【 S 】 to enter Shortcut interface,
adjust the volume via sliding the bar
Turn on PIP
Touch 【 M 】 button to return the main
menu,select【PIP】icon.
PIP offers 8 layout options,select one you need.
You can adjust Width/ Height/ Position/
Crop for main/sub picture
PIP

mini-pro Quick Start
6
Tap【PTZ】icon to enter the menu
You can choose on or off to enable/disable the
function,select the number of camera,and set
the IP address.
Chroma Key
PTZ
Tap【Chroma Key】to enter the setting menu.
You can choose on or off to enable/disable the
function and select the background color to be
removed and make adjustments.
You can set the size of layers via sliding the bar.
Adjust the size of the screen through the
Up/Down button, and all the re-adjusted settings
will be Saved to the current View in real time.
Press the【S】button to enter the Shortcut menu
interface,and select 【 Chroma Key 】 ,the saved
preset can be loaded directly.
You can use the joystick to switch the selection of
the main/sub-screen and adjust the size, push the
signal source to switch between different signals.

mini-pro Quick Start
7
You can adjust the location and zoom in the
menu.
On the PTZ menu interface , when the PTZ
function is enabled, the rotation angle of the
PTZ can be adjusted by the joystick, and the
focal length adjusted by the Up/Down keys.
Load and Save
Record
The mini-pro supports recording streaming media content to an external SSD or U disk through the USB2.0 interface. The
SSD storage can reach up to 2T, and the U-disk can support up to 64G. The supported formats include exFAT and FAT32.
You can save the preset to the corresponding
View 1-4.
After setting the effect, please touch the button
【M】and select the【Save】.
Push button【S】to enter the Shortcut menu
Format the SSD or U-disk and then insert it
into the USB2.0 interface RECORD.
Press【Record】to enter the menu
Select View1~4 to load the saved presets
directly

mini-pro Quick Start
8
Contact Information
Visit our website which has a host of resources and check out our YouTube channel for How To videos and
much more. Or reach out to the team any time via the website or our socials.
Proudly designed and manufactured in Xiamen China, our beautiful island city home & HQ.
Xiamen RGBlink Science & Technology Co Ltd
6 th Floor, Weiye Building, Torch Park Hi Tech Zone,Xiamen, Fujian 361006
● Web: http://www.rgblink.com
● Tel: [phone]
● Fax: [phone]
● Customer Hotline: [phone]
● E-mail: [e-mail]
Turn ON/OFF to record audio and set the
quality.
Touch【Disk Info】to view the Capacity and
Remaining time.
Press the button to start/stop record.
After setting, you can press【S】button to find
the record icon, and tap it to pause record or
continue.