RH Baby&child Chesterfield Bunk Bed User manual

WARNING: Read all instructions before assembling
this product. KEEPINSTRUCTIONSFORFUTUREUSE.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You
can also order parts by writing to the address above. Include the product model number,
color, and a brief description of the part. Or call 1-800-762-1751.
CARE AND CLEANINGCAGCARE AND CLEANING
DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft, dry cloth.
Dab spills quickly with a soft cloth. Vacuum to remove dust.
If the Bunk Bed is to be stored, store in a cool, dry place and carefully package all original
hardware to protect from loss.
Page 1 of 11
!
Made In China
Chesterfield Bunk Bed Full - Assembly Instructions

IMPORTANT SAFETY INFORMATION FOR BUNK BED
1. Follow the information on the WARNING label appearing on the upper bunk end structure and on the
box. Do not remove warning label from bed.
2. Always use the specified mattress size to help prevent the likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 inches below the upper edge of guardrails on top bunk.
4. Do not allow children under 6 years of age to use upper bunk.
5. Do not allow more than one person on upper bunk.
6. Periodically check and ensure that the guardrails, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact Restoration Hardware for replacement parts.
10. Use of a night light may provide added safety precaution for a child using the upper bunk.
11. Use guardrails on both sides of the upper bunk.
12. I f t h e b u n k b e d w i l l b e p l a c e d n e x t t o a w a l l , t h e g u a r drail that runs the full length of the bed should be
placed against the wall to prevent entrapment between the bed and the wall.
13. Do not use a water flotation mattress on the bunk bed.
14. STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that is
not designed for use with the bed, such as hooks, belts, and jump ropes.
15. Keep these instructions for future reference.
Page 2 of 11
Chesterfield Bunk Bed Full - Assembly Instructions

PARTSINCLUDED
(1)LeftBunkEnd-1pc (2)RightBunkEnd-1pc (3)BackSideRail-2pc
(7)BedFoot-4pcs (8)Ladder-1pc (9)TwinPanel-4pcs
( 1 0 ) T w i n S l a t R o l l - 2 s e t s
Page 3 of 11
(4) Front side Rail - 2 pcs (5) Back Guardrail - 1 pc (6) Front Guardrail - 1 pc
Chesterfield Bunk Bed Full - Assembly Instructions

HARDWARELIST
NO. HARDWARE & PARTS INCLUDED Qty
A Threaded Rod 17 pcs
B Curved Washer 17 pcs
C Spring Washer 17 pcs
D Nut 17 pcs
E Spanner Wrench 1 pcs
F Big Screw (4cm) 16 pcs
G Medium Screw (2.5cm) 50 pcs
H Metal plate 6 pcs
I Allen Key 1 pcs
J Allen Head Bolt 7 pcs
K Big Flat Washer 7 pcs
The hardware is packed in box 2 with Bed Feet.
TOOLS NEEDED:
Phillips-head screwdriver (not included)
ASSEMBLY INSTRUCTIONS
Note:
-Bed must be assembled by at least two people.
-Please read instructions carefully before assembling bed.
-Use the above parts and fittings list to identify each component.
-Keep all packing materials until assembly is complete to avoid loss of smaller parts.
-Do not completely tighten all bolts until all steps are finished.
Page 4 of 11
Small Screw (2cm)
Chesterfield Bunk Bed Full - Assembly Instructions

Process:
Step 1: Attach Bed Feet (7) to left Bunk End (1) and repeat the procedure with Right Bunk End (2).
Page 5 of 11
( ) ( )
( )
1
2
7
Chesterfield Bunk Bed Full - Assembly Instructions

Step2:
into the holes on the end of Front Side Rail (4), and insert Curved Washers (B), Spring Washers (C),
and Nuts (D) onto the Threaded Rods (A) to attach the Left Bunk end (1) and Right Bunk End (2).
Tighten the Nut (D) and Threaded Rod (A) with Spanner Wrench (E). Repeat the procedure with Back.
Attache Front Side Rail (4) to Left Bunk End (1) and Right Bunk End (2). Insert the Threaded Rods (A)
Page 6 of 11
( )
( )
( )
( ) ( )
( )
1
2
3
3
4
4
A
B
C
D
E
Chesterfield Bunk Bed Full - Assembly Instructions

Step 3: Attach Back Guardrail (5) to Left Bunk End (1) and Right Bunk
Step4:Attach Front Guardrail (6) with Allen Head Bolts (J) and Big Flat Washers (K).
ForBunkswithLadderonLeftside,attach Front Guardrail (6) to the Right Bunk
End(2),soladdersitsonLeft.
ForBunkswithLadderonRightside,attach Front Guardrail (6) to Left Bunk
End(2),soladdersitsonRight.
Step 5:Reinforce the Back Guardrail (5) and Front Guardrail (6) with
MetalPlates(H),bytightening with Medium Screws (G).
Page 7 of 11
( )
( ) ( )
( )
( )
( )
I
J
K
11
2
3
G
2
3
End (2). Use the Allen Key (1) to tighten Allen Head bolts (J)
and Big Flat Washers (K).
Back Guardrail (5)
Front Guardrail (6)
Chesterfield Bunk Bed Full - Assembly Instructions

Step6: L a y t h e T w i n S l a t R o l l ( 1 0 ) i n b e t w e e n t h e F r o n t S i d e R a i l
(4) and Back Side Rail (3), and tighten with Big Screws (F).
-The webbing on the slats should be on the bottom side.
-Numbers on the slat roll show the locations to tighten the Big Screws.
Page 8 of 11
( )
( )
1
2
3
4
5
7
6
8
10
10
F
F
Chesterfield Bunk Bed Full - Assembly Instructions

Step 7: Lay the Twin Panels (9) on top of the Slat Roll (10), and tighten with
Medium Screws (G).
- Numbers on the panel show the locations to tighten the Medium Screws.
Page 9 of 11
( ) ( )
1
2
3
4
9 9
G
Chesterfield Bunk Bed Full - Assembly Instructions

Step 8: Attach Ladder (8) to Front Side Rail (4).
Page 10 of 11
( ) ( )
8 8
L
M
Chesterfield Bunk Bed Full - Assembly Instructions