RH Baby&child G0037-2 User manual

Page 1 of 6
LEYTON UPHOLSTERED CRIB TODDLER BED KIT
Made in Vietnam
Model No: G0037 - 2
Distributed in the U.S.A by:
RH Baby&Child
2900 N MACARTHUR DRIVE
TRACY, CA 95376
www.rhbabyandchild.com
Distributed in Canada by:
RH Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia
V6E4N7
WARNING: Read all
Instructions before assembling
this product.
KEEP INSTRUCTIONS FOR
FUTURE USE.
CUSTOMER SERVICE
If you are missing partsor have any questions about this product, contact us first. You can also order parts by writing to
the address above. Include the product model number, color, and a brief descriptionof the part.Or call 1-800-762-1751.
CARE AND CLEANING
TOOLS AND INSTALLATION
Tools needed: Key Wrench (included).
Two people are recommended for assembly.
When inserting bolts, turn clockwise until tight. Then loosen 1/2-3/4 of aturn. After bed is completely assembled,
return to each bolt and tighten.
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.If the crib is to be stored, store in a cool,
dry place and carefully package all original hardware to protect from loss.

Page 2 of 6
LEYTON UPHOLSTERED CRIB TODDLER BED KIT
Infants have died in toddler beds from entrapment and strangulation.
Failure to follow these warnings and the assembly instructions could result in
serious injury or death.
NEVER use bed with children under 15 months.
NEVER place bed near windows where cords from blinds or drapes may strangle
a child.
The mattress intended for use on the bed shall be a full-size crib mattress
having minimum dimensions of 51 5/8 inches (1310mm) in length, 27 1/4
inches (690mm) in width and 4 inches (100mm) in thickness, not
exceeding 6 inches (152mm) in thickness.
If guardrails are used as the mattress containment means, guardrail(s)
provided must be used to avoid the formation of a gap between the
mattress and the bed that could cause an entrapment.
DO NOT place bed near windows where cords from blinds or drapes
may strangle a child.
DO NOT place items with a string, cord, or ribbon around a child's neck,
such as hood strings or pacifier cords.
A child using the toddler or day bed shall be at least 15 months of age
and shall not weigh more than 50lbs (22.7kg).
WARNING: ENTRAPMENT/STRANGULATION HAZARD

Page 3 of 6
LEYTON UPHOLSTERED CRIB TODDLER BED KIT
CRIB (Sold separately)
1 piece
4 pieces
2 pieces
6 pieces
PARTS INCLUDED:
D
HARDWARE INCLUDED:
[1] TODDLER RAIL D
6
7
8
9
Long Bolts 5/16" x 2-1/4"
Small Bolts 5/16"x 3/4"
Spring Washer 5/16"
NO. ITEM DESCRIPTION QTY.
Allen Key 4mm

Page 4 of 6
ASSEMBLY INSTRUCTIONS
LEYTON UPHOLSTERED CRIB TODDLER BED KIT
Remove Stationary Side Rail (B) from the
crib by carefully unscrew and remove the
4 Long bolts with spring washer on Left/
Right sides of the Stationary Side Rail (B)
using Allen Key (9).
STEP 1:
If mattress support is not in the lowest
position, loosen all tightened bolts from
side frames. Spread front of crib open
enough to remove mattress support (C),
and move it to the lowest position.
STEP 2:
A
4x
4x
B
A
9
Highest
level
Note: The Mattress support (C)
must be at the lowest level for a
toddler bed.
Middle
level
Lowest
level
C
9
A
A
B
C
B

Page 5 of 6
LEYTON UPHOLSTERED CRIB TODDLER BED KIT
STEP 3:
Position the Toddler Rail (D) between
the Headboard/Footboard (A) and
align the holes.
Attach the Toddler Rail (D) to the crib
by securing with Long Bolts (6), Spring
Washers (8), and tighten with Allen
Key (9).
STEP 4:
A
D
D
A
6
8
A
4x
D
9

Page 6 of 6
LEYTON UPHOLSTERED CRIB TODDLER BED KIT
STEP 5:
When converting the crib to toddler bed, the
Small Bolt (7), and Spring Washer (8) should
be inserted in the upper holes of the Side
Frame (A) and tighten with the Allen Key (9).
After crib is completely assembled,
return to each bolt and tighten to
snug fit. DO NOT over tighten.
WARNING:
A
A
A
2x
89
7
CARE INSTRUCTIONS:
1. DUST OFTEN USING A CLEAN, SOFT, DRY LINT- FREE CLOTH.
2. BLOT SPILLS IMMEDIATELY AND WIPE WITH A CLEAN, DAMP CLOTH.
3. DO NOT USE CHEMICAL CLEANSERS, ABRASIVES OR FURNITURE POLISH ON THE LACQUERED FINISH.