SAVILE CYLINDRICAL TABLE LAMP 14" UNITED STATES ENGLISH
RH.COM
REVISION 04-13-23
IMPORTANT: PLEASE READ
IMPORTANT SAFETY FEATURES
BULBS
This fixture has been rated for up to one (1) 40-watt maximum
Type T Lightbulb (B) or one (1) 9-watt maximum Compact Fluorescent
Lightbulb (not included). To avoid the risk of fire, do not exceed
recommended wattage.
DIMMER SWITCH COMPATIBILITY
This fixture is dimmer-switch compatible and may only be used with a
forward-phase dimmer switch.
WARNINGS
All wires are connected. When unpacking, be careful not to pull wires,
as damage may result. Do not connect electricity until the fixture is
fully assembled. To reduce the risk of fire, electrical shock, or personal
injury, always turn off fixture and allow it to cool prior to replacing
the lightbulb. Do not touch or look directly at the bulb when fixture is
illuminated. Keep flammable materials away from lit bulb.
WARNING: This product can expose you to lead, which is
known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
WARNING: STRANGULATION HAZARD
Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.
Keep out of reach of children under 3 years of age.
THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.
ASSEMBLY AND INSTALLATION
SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM
THE FUSE BOX OR CIRCUIT BREAKER PANEL.
1. Carefully remove all parts from the box and remove all
plastic coverings.
2. Screw Bulb (B) into the threaded socket.
3. Install Shade (A) onto Lamp Base (C).
4. Plug into proper electrical outlet.
5. Assembly is complete.
CARE INSTRUCTIONS
Do not use polishes or cleaners on the fixture. Wipe clean with a soft,
dry cloth.
