RHINO TR208LT User manual

© 2006Alamo Group Inc.
RHINO®
1020 S. SangamonAve.
Gibson City, IL60936
800-446-5158
Email: [email protected]
PART'S MANUAL
An Operator's Manual was shipped with the equipment in the
Manual Canister. This Operator's Manual is an integral part of
the safe operation of this machine and must be maintained
with the unit at all times. READ, UNDERSTAND, and FOLLOW
the Safety and Operation Instructions contained in this manual
before operating the equipment. If the Operator's Manual is
not with the equipment, contact your dealer or Servis-Rhino
(800-446-5158) to obtain a Free copy before operating the
equipment.
ROTARY CUTTER
TR208LT/PT
Rev 10-2020 Part No. 00793559P

TO THE OWNER/OPERATOR/DEALER
Allimplementswithmovingpartsare potentiallyhazardous. Thereisno substituteforacautious, safe-mindedoperatorwho
recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to
be used with all its safety equipment properly attached to minimize the chance of accidents.
BEFOREYOUSTART!! Read the safety messages on the implement and shown in your manual.
Observe the rules of safety and common sense!
WARRANTY INFORMATION:
Readand understand the complete Warranty Statementfound inthis Manual. Fill outthe WarrantyRegistration Form
in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card
andontheWarrantyFormthatyouretain.Theuseof"will-fit"partswillvoidyourwarrantyandcancausecatastrophic
failure with possible injury or death.

PARTS
SECTION
Parts Section – 1

Parts Section – 2
©2006 Alamo Group Inc.
For maximum safety and to guarantee optimum product reliability, always use
genuine Servis-Rhino Parts. The use of inferior replacement parts may cause
premature or catastrophic failure which could result in serious injury or death.
Direct any questions regarding parts to:
The following instructions are offered to help eliminate needless delay and error in processing
purchase orders for the equipment in this section.
1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the
basic machine featured in this manual. Part Numbers and Descriptions are given to help
locate the parts and quantities required.
2. The Purchase Order must include the name and address of the person or organization
ordering the parts, who should be charged, and if possible, the serial number of the machine
for which the parts are ordered.
3. The Purchase Order must clearly list the quantity of each part, the complete and correct part
number (be sure to include all periods), and the basic name of the part.
4. The Manufacturer reserves the right to substitute parts where applicable.
5. Some parts are unlisted items which are special production items not normally stocked and
are subject to special handling. Request a quotation for such parts before sending a
Purchase Order.
6. The Manufacturer reserves the right to change prices without prior notice.
NOTE: Please refer to The Safety Section in the front of this Manual for the proper
Part Number when ordering Replacement Safety Decals.
PARTS ORDERING GUIDE
RHINO®
1020 S. Sangamon Ave.
Gibson City, IL 60936
800-446-5158
Email: [email protected]

PART NAME INDEX
AXLE ASSEMBLY - LIFT TYPE................................................................................................................................................................ 4
AXLE ASSEMBLY - LIFT TYPE TAILWHEEL 00776220....................................................................................................................... 5
AXLE ASSEMBLY - PULL TYPE............................................................................................................................................................... 7
AXLE ASSEMBLY - PULL TYPE HUB & SPINDLE ASSEMBLY 00790220....................................................................................... 9
BLADE CARRIER...................................................................................................................................................................................... 10
CANISTER ASSEMBLY............................................................................................................................................................................ 11
CYLINDER ASSEMBLY - PULL TYPE................................................................................................................................................... 12
DECALS - LIFT TYPE................................................................................................................................................................................ 13
DECALS - PULL TYPE.............................................................................................................................................................................. 15
DRIVELINE - 00793194 DOUBLE SHAFT FLEX COUPLER................................................................................................................ 17
DRIVELINE - JACKSHAFT 00793191...................................................................................................................................................... 18
DRIVELINE - MAIN CV 540RPM 00787965SP PULL TYPE................................................................................................................. 19
DRIVELINE -540RPM 00793370 LIFT TYPE.......................................................................................................................................... 20
GEARBOX ASSEMBLY - 00777389P 1:1.21 SU 540 (DIVIDER).......................................................................................................... 21
GEARBOX ASSEMBLY - 00791028 1:1.69 NO-LUBE (OUTBOARD).................................................................................................. 23
GUARDING ASSEMBLIES....................................................................................................................................................................... 25
LEVEL ROD ASSEMBLY - PULL TYPE 00793257................................................................................................................................ 26
QUICK HITCH COMPONENTS................................................................................................................................................................ 27
SHIELD ASSEMBLY - CENTER LIFT TYPE.......................................................................................................................................... 29
SHIELD ASSEMBLY - CENTER PULL TYPE......................................................................................................................................... 30
SHIELD ASSEMBLY - OUTBOARD........................................................................................................................................................ 32
SKID SHOES............................................................................................................................................................................................... 34
SLIPCLUTCH - 00793535........................................................................................................................................................................... 35
TONGUE ASSEMBLY - PULL TYPE....................................................................................................................................................... 36
©2019 Alamo Group Inc. Parts Section -3
TR208
TIRE OPTIONS......................................................................................................................................................................................... 37

AXLE ASSEMBLY - LIFT TYPE
ITEM PART NO. QTY. DESCRIPTION
1 00793358 2 WDMT, TR 8` CASTOR ARM
2 00776220 2 ASY, CASTER FORK & WHEEL
3 00793361 2 PLATE, TR 8` CASTOR LOCK
4 00793360 2 PLATE, TR 8` CASTOR HEIGHT
5 00748823 4 HHCS 1/2-13 UNC X 1-1/2 GR.5 PL
6 00001800 4 LOCKNUT TLM 1/2 NC PLC
7 4526 4 NUT LOCK FLG WHIZ 1/2-13 NC PL
8 000514 4 CARB, 1/2 NC 1-1/4 PL5
9 5JRC1680 2 NUT TOPLOCK 1 NC PL
10 03200782 2 HEXB 1 NC 5 PL5
©2019 Alamo Group Inc. Parts Section -4
TR208

BLANK INTENTIONALLY
©2019 Alamo Group Inc.
TR208

AXLE ASSEMBLY - LIFT TYPE TAILWHEEL 00776220
©2019 Alamo Group Inc. Parts Section -5
TR208

AXLE ASSEMBLY - LIFT TYPE TAILWHEEL 00776220
Continued...
ITEM PART NO. QTY.
17 00776212 1
18 00771620 1
19 00780238 1
20 00785915 1
NUT SPINDLE M24 X 2
PIN,COTTER 5/32X2-1/2 PL
ASY,TAILWHEEL HUB (INCLUDES ITEMS 7 & 20)
KIT,BEARING & SEAL (INCLUDES ITEMS 3, 7-10, 13-15)
©2019 Alamo Group Inc. Parts Section -6
TR208
0 00776220 1
1 373024H 1
2 00758899 1
3 02822500 1
4 ---------- 1
5 00776213 2
6 00776219 2
7 00772082 1
8 00776216 4
9 00002000 4
10 00759635 4
11 00013901 4
12 0585020210A 1
13 00772017 2
14 00772018 2
15 00776211 1
16 15B2400 2
DESCRIPTION
ASSY CASTER FORK & WHEEL - COMPLETE
WHEEL & TIRE ASSY
PIN COTTER 3/8X2-1/2 PL EXTEND
FLATWASHER 1 PL STD
HUB 4 BOLT - ORDER 00780238 (ITEM# 19)
BEARING
SEAL OIL 40 X 62 X 8
NIPPLE, GREASE M8X1
BOLT M12 X 1.5 X 25
HHCS 3/8 NC 3/4
LUG BOLT FLAT WASHER
NUT HEX 3/8 NC PL
WDMT,CASTER FORK
BUSHING SPINDLE STEP
DUST CAP
BOLT
FLATWASHER NAR 1-1/2 PL

AXLE ASSEMBLY - PULL TYPE
ITEM PART NO. QTY. DESCRIPTION
1 00793240 2 WDMT, STIFF AXLE ARM
2 00793220 1 WDMT, MAIN AXLE 8` DECK
3 00793242 2 PLATE, AXLE CLAMP
4 00790220 2 ASY,HUB & SPINDLE
5 8727A 1 CYLINDER, HYD 2-1/2 X 8
6 00755234 1 KIT, CONTROL SPACER
7 00791366 1 CASTING, 8IN CYLINDER LOCK
8 420011 1 PIN, CLEVIS 1 X 5 PL
9 02822500 2 FLATWASHER 1 PL STD
10 00606000 2 PIN, COTTER 3/16 X 2"
11 8354 1 PIN, CLEVIS, 1.00 X 3.25
12 00764375 2 HHCS 1/2NC X 3-1/4 PL5
13 00001800 2 LOCKNUT TLM 1/2 NC PLC
14 02959391 8 HHCS 3/4 NC 2-1/4 PL5
©2019 Alamo Group Inc. Parts Section -7
TR208

AXLE ASSEMBLY - PULL TYPE
Continued...
ITEM PART NO. QTY. DESCRIPTION
15 00037200 8 NUT,HEX TOPLOCK 3/4 NC GR.C PL
16 03200347 1 EMBLEM, SMV
17 00021400 2 HEXB 1/4 NC 3/4 PL5
18 00793364 1 MOUNT, CANISTER SMV BRANDED
19 00793365 1 PLATE, BRANDING BACKER
20 00780878 3 RIVET, 3/16 POP X 15/32" G.R.
21 00748823 2 HHCS 1/2-13 UNC X 1-1/2 GR.5 PL
22 4526 2 NUT LOCK FLG WHIZ 1/2-13 NC PL
23 00778185 2 WDMT, AXLE PIVOT PIN
24 02959924 2 NUT, LOCK TLM 1/4-20 NC PLB
25 00748823 2 HHCS 1/2-13 UNC X 1-1/2 GR.5 PL
26 00793257 1 SUB-ASY, TR 8` LEVEL ROD
27 00793369 1 "HOSE ASSY,#4-6FJ90X SHORT-6FJX-132LG"
©2019 Alamo Group Inc. Parts Section -8
TR208

AXLE ASSEMBLY - PULL TYPE HUB & SPINDLE ASSEMBLY 00790220
ITEM PART NO. QTY. DESCRIPTION
1 00790220 1 ASY,HUB & SPINDLE - 5 BOLT (1-3/4 DIA SHAFT,5-1/2 BC)
2 00750614 5 NUT, 1/2-20NF 90° CONE LUG PL (5)
3 00790292 1 CAP, HUB (1)
4 0538400 5 DRIVE STUD, 1/2-20X1-7/8 (5)
5 00764375 1 HHCS ½ NC 3-1/4 PL5 (1)
6 00001800 1 LOCKNUT, TLM ½ NC PLC (1)
©2019 Alamo Group Inc. Parts Section -9
TR208

BLADE CARRIER
ITEM PART NO. QTY. DESCRIPTION
1 00792357 2 WDMT, BLADE CARRIER
2 00792892 2 BLADE, FAN CW 3X14-1/2 CTR-TIP (SHOWN)
00792893 2 BLADE,FAN CCW 3X14-1/2 CTR-TIP (PARALLEL LIFT)
3 00786548 1 KIT, HARDWARE (BOLTS, NUTS, & WASHERS)
©2019 Alamo Group Inc. Parts Section -10
TR208

CANISTER ASSEMBLY
ITEM PART NO. QTY. DESCRIPTION
1 00776031 1 CANISTER, PARTS MANUAL
2 00780878 3 RIVET, 3/16 POP X 15/32" G.R.
©2019 Alamo Group Inc. Parts Section -11
TR208

CYLINDER ASSEMBLY - PULL TYPE
ITEM PART NO. QTY.
0 8727A 1
1 00774729 1
2 ---------- 1
3 ---------- 1
4 00774753 1
5 --------- 1
6 3047112 4
9 00774760 1
15 3047117 1
16 1917140 1
17 ---------- 1
18 ---------- 8
19 5JRC12160 1
20 1917132 1
21 2417154 1
22 00793369 1
23 6137-10 1
24 02968850 1
25 00786767 1
DESCRIPTION
CYLINDER,HYD 2-1/2 X 8
CLEVIS CAP
ROD CAP
PISTON
ROD
TUBE
TIE ROD
SEAL KIT
NYLON THREAD PROTECTOR
ROD CLEVIS
SET SCREW
TIE ROD NUT
PISTON NUT
PORT PLUG
BREATHER
HOSE #4 - 6FJX90 - 6FJX- 132LG (NOT SHOWN)
CPLR,QK 1/2 MHALFX3/4 FORB YDP (NOT SHOWN)
ADP HYD STGHT 8MB-6MJ (NOT SHOWN)
ADP HYD STGHT 8MB - 6MJ W/.062 ORIFICE (NOT SHOWN)
©2019 Alamo Group Inc. Parts Section -12
TR208

DECALS - LIFT TYPE
©2019 Alamo Group Inc. Parts Section -13
TR208

DECALS - LIFT TYPE
Continued...
ITEM PART NO. QTY. DESCRIPTION
1 ---------- 1 DECAL,MODEL TR208 S/N (N/A)
2 00790342 1 DECAL,PAW PRINT 6"
3 00793551 1 DECAL, RHINO 12" X 2.69"
4 00793546 1 DECAL, TR208 MODEL
5 1458392 2 DECAL,RED REFLECTOR 2X9
6 1458393 1 DECAL,YELLOW REFLECTOR 2X9
7 00792312 2 DECAL,RHINO-BLACK 5.68" TALL
8 00792179 1 DECAL,RHINO-RED/WHITE/BLUE
9 00792180 1 DECAL,FLAG-MADE IN USA
10 D137 1 DECAL,CCW BLADE ROTATION
11 D138 1 DECAL,CW BLADE ROTATION
12 D395 2 DECAL,REPLACE BLADES
13 00792308 3 DECAL,GEARBOX WARRANTY-HOOF
14 00756004 3 DECAL,DANGER - GUARD MISSING
15 D388 1 DECAL DANGER - D/L
16 D614 2 THROWN OBJECT SHIELD MISSING
17 D454 1 CRUSHING HAZARD (UNDER DECK)
18 D389 1 DECAL,DANGER-DO NOT OPERATE
19 00760657 1 DECAL,GENUINE RHINO PARTS
20 D608 2 DECAL,WARNING - BLADE TIMING
21 D814 1 DECAL,DANGER - MULTI-LANGUAGE
22 D629 1 DECAL,LUBRICATION CHART
23 00776031 1 CANISTER,MANUAL
24 00793559C 1 OPERATOR’S MANUAL (INSIDE CANISTER)
25 00780878 3 RIVET, 3/16 POP-GRIP-.468
©2019 Alamo Group Inc. Parts Section -14
TR208

DECALS - PULL TYPE
©2019 Alamo Group Inc. Parts Section -15
TR208

DECALS - PULL TYPE
Continued...
ITEM PART NO. QTY. DESCRIPTION
1 ---------- 1 DECAL,MODEL TR208 S/N (N/A)
2 00790342 1 DECAL,PAW PRINT 6"
3 00793551 1 DECAL, RHINO 12" X 2.69"
4 00793546 1 DECAL, TR208 MODEL
5 1458392 2 DECAL,RED REFLECTOR
6 1458393 1 DECAL,YELLOW REFLECTOR
7 00792312 2 DECAL,RHINO-BLACK 5.68" TALL
8 00792179 1 DECAL,RHINO-RED/WHITE/BLUE
9 00792180 1 DECAL,FLAG-MADE IN USA
10 D137 1 DECAL,CCW BLADE ROTATION
11 D138 1 DECAL,CW BLADE ROTATION
12 D395 2 DECAL,REPLACE BLADES
13 00792308 3 DECAL,GEARBOX WARRANTY-HOOF
14 00756004 3 DECAL,DANGER - GUARD MISSING
15 D388 1 DECAL DANGER - D/L
16 D614 2 DECAL,DANGER-DO NOT OPERATE
17 D454 1 DECAL,MOWER CAN FALL SHIPPING
18 D389 1 DECAL,DANGER - OPERATION
19 00760657 1 DECAL,GENUINE RHINO PARTS
20 D608 2 DECAL,WARNING - BLADE TIMING
21 D518 1 DECAL,WARNING - JACK CAPACITY
22 D814 1 DECAL,DANGER - MULTI-LANGUAGE
23 D629 1 DECAL,LUBRICATION CHART
24 00776031 1 CANISTER,MANUAL
25 00793559C 1 OPERATOR’S MANUAL
26 00780878 3 RIVET, 3/16 POP-GRIP-.468
27 03200347 1 EMBLEM, SMV
28 D390 1 DECAL WARNING, SERIOUS INJURY
©2019 Alamo Group Inc. Parts Section -16
TR208

DRIVELINE - 00793194 DOUBLE SHAFT FLEX COUPLER
ITEM PART NO. QTY. DESCRIPTION
0 00793194 1 COMPLETE SHAFT,DOUBLE FLEX COUPLER
1 00778756 1 DBL FLEX COUPLER SHAFT 11-7/16
2 00785557 2 DISC,RUBBER - 7" OD
3 00766475A 24 WASHER,BEADED D/L COUPLER
4 00771287 12 BUSHING,RUBBER DISK
5 00758636A 1 SPIDER, W/1-3/8-21 SPLINE SE-8
6 02964434 12 HEXB METRIC 16-P2.0 - 65MM 5
7 00765962 12 NUT MET TLE 16MM-P2.0 PL
8 00764386 2 GREASE FITTING,8MMX1 STRAIGHT
9 00751281 2 NUT, JAM 3/8-16NC
10 3167 2 SQSS 3/8-16NC X 1
11 00789409 1 FLEX CONNECTOR YOKE 1-3/8" - 6
©2019 Alamo Group Inc. Parts Section -17
TR208