Rhotheta RT-1000 User manual

User Manual
SNMP Module

SNMP Module
RHOTHETA Page 2 of 30 User Manual
Edited by:
RHOTHETA Elektronik GmbH
Dr.-Ingeborg-Haeckel-Str. 2
82418 Murnau
Germany
Tel.: [phone] - 0
Fax: [phone] - 15
Internet: www.rhotheta.de
E-Mail: [e-mail]
Copyright  RHOTHETA Elektronik GmbH
All rights reserved
Issue: [2018/11/29] [Rev 1.00]
Document-ID: 12-9-2-0031-3-1-60
Note:
The manufacturer reserves the right on making modifications of the product described herein
at any time and without previous information.

SNMP Module
RHOTHETA Page 3 of 30 User Manual
Index
1Legend of Signal Words.................................................................................................. 4
2Safety................................................................................................................................ 4
2.1 General Safety Information.....................................................................................................................4
2.2 Basic Safety Instructions ........................................................................................................................5
3General Description......................................................................................................... 6
4Installation........................................................................................................................ 7
4.1 Hardware Connection for One Channel Mode .......................................................................................7
4.2 Hardware Connection for Multichannel Mode ........................................................................................9
4.3 Interfaces ..............................................................................................................................................10
4.4 Software Installation and Configuration................................................................................................11
4.4.1 Mandatory Configuration .........................................................................................................11
4.4.2 I/O Configuration Example.......................................................................................................18
5Operation........................................................................................................................ 24
5.1 One Channel Mode...............................................................................................................................24
5.2 Multichannel Mode................................................................................................................................24
6Technical Characteristics ............................................................................................. 25
7Legal Information........................................................................................................... 26
7.1 EU Declaration of Conformity ...............................................................................................................26
7.2 Disposal within the European Union.....................................................................................................26
7.3 Disposal outside the European Union ..................................................................................................26
8Appendix ........................................................................................................................ 27
8.1 Test Example........................................................................................................................................27
9Notes............................................................................................................................... 30

SNMP Module
RHOTHETA Page 4 of 30 User Manual
1 Legend of Signal Words
Note
This symbol designates tips or additional notes that must be paid attention to and make work easier.
Caution
means that ignoring the instructions may lead to property damage or loss of data.
Warning
means that ignoring the instructions, there may be a danger to health or life.
2 Safety
2.1 General Safety Information
RHOTHETA Elektronik GmbH is constantly trying to keep the safety standard of the products up to date and to
offer the customers the highest possible level of safety.
RHOTHETA products are designed and tested in accordance with the valid safety regulations. The compliance
with these standards is continuously monitored by our quality assurance system.
This product is tested and left the factory in perfect technical and safety-relevant condition. To maintain this
condition and to ensure safe operation, the user must pay attention to all instructions and warnings given. For
any questions regarding these safety instructions, RHOTHETA Elektronik GmbH can be contacted at any time.
The observance of the safety instructions will help to prevent personal injury or damage caused by all kinds of
dangers. This requires that the following safety instructions must be read carefully and understood before using
the product, as well as observed when using the product. The additional safety instructions such as for
protecting persons appear in relevant parts of the product documentation and must also be paid attention to.
The use of this product other than it’s designated purpose or in disregard of the instructions of the manufacturer
is the responsibility of the user. The manufacturer takes no responsibility for the misuse of the product.
The manufacturer is not liable beyond the scope of legal rules!
This guide is part of the product SNMP Module and is retained throughout the lifetime and to pass with the
product.

SNMP Module
RHOTHETA Page 5 of 30 User Manual
2.2 Basic Safety Instructions
Caution / Warning
Read and observe the following instructions, warnings and safety instructions of the manufacturer!
•At all work, the local or national safety and accident prevention regulations must be observed.
•The product may only be installed by authorized personnel. When installing or operating with the
product always follow the manufacturer's instructions.
•Do place the product on appropriate locations.
•Do not expose the product environmental conditions (heat, humidity, wind load etc.) that exceed the
specified conditions in the manuals.
•Use only the manufacturer prescribed components and/or use only recommended material and do
not change this. Any other use or unauthorized modifications to the product will void the
authorization to operate it.
•Connect only approved accessories kits or additional equipment.
•Ensure that the connections with information technology equipment, e.g. industrial computers,
comply with the IEC 60950-1/EN 60950-1 standard that applies in each case.
•The product may only be opened by authorized personnel. The power connector must always be
disconnected before opening.