Richell 80019 User manual

UPC
80019 - 80024
Proper Usage
•The Small is designed for extra small pets up to 11lbs and the Medium is designed
for Small Pets up to 17.6lbs.
Cautions!
Cautions!
Cautions!
Warnings!
The following signs are special remarks for safety use of the product.
Keep these remarks in mind before using this product.
: Remarks on inappropriate use which might cause death, serious injury and/or physical damage.
: Remarks on inappropriate use which might cause slight injury and/or physical damage.
What are the following signs?
Instruction for Proper Use
Warnings!
lMake sure seat-belt is attached to this product correctly to avoid unexpected accidents.
This product is constructed by four parts; Top Main Unit, Bottom Main Unit, Latch and Door.
lPlease use the Small for extra small pets that weight up to 11lbs and the Medium for small pets up to 17.6lbs. Do not
use this product for pets out of this weight range to avoid unexpected accidents.
lDo not lean or get on this product to avoid unexpected injuries and/or product damages.
lDo not put your hands or fingers the spaces between the part of Main Unit to avoid unexpected injuries.
lSome parts have shape edges. Pay attention handing this product to avoid unexpected injuries.
lMake sure Latches and Door locks properly before carrying this product.
lDo not use this product if you find anyf deformed parts and/or product damages.
l
Keep this product away from all heat sources at all times to avoid unexpected product damages or burn-related injuries to self/pets.
lWhen children are around, please make sure to use this product under adult supervision.
lDo not use this product while your pet is leashed to avoid unexpected accidents, such as pet entanglement.
lThis product does not guarantee the safety of your pets.
How to Assemble
How to Open/Close the Top Door
Thank you for choosing Richell's Product. Please read this instruction manual carefully before using this product, and keep for
future reference. If you give this product to someone else, please also give this instruction manual to the new owner. Please
note some parts of the figures shown below may be slightly different from the actual product, for your better understanding of
the structure and proper use.
Instruction Manual
Place the Top Main Unit to Bottom
Main Unit. Then close the Latches.
Then snap bottom half of Latch to
lock in place.
※Make sure all four Latches are slid
down and locked correctly.
※Make sure all four Door
Axes are placed into
the holes and attached
properly.
Separate Top and Bottom
Main units. Then, remove
the door panel and latches
stored between them.
How to Open How to Close
Slide the Lock on the Top Door. Then,
pull the Top Door down slowly to close.
※Make sure to lock the Top Door
properly.
When opening/closing the Top Door, be careful not to pinch your fingers or
your pet's paws.
Slide the Lock on the Top Door to
release. Then lift the Top Door to
open.
Slide the Top and Bottom Door
Lock on each side of Door and
place the Door Axes into the
holes on the Main Unit. Then
release the Top and Bottom
Door Locks to attach the Door
to Main Unit.
Door
How to Attach the Top/Bottom Main Unit
Preparation
How to Attach the Door
to Main Unit Door open/close from
right or left side.
Door Lock
Case for Door Lock
Straps
Connector Handle
Door Axis
Top Door Lock
Case for Top
Door Lock
Top Door
1. Align the Hook of the Latch to the Receiver,
2. Then, push up the Hook and insert it to the
Receiver on the side of Base Main Unit and
attach. (4 locations)
Hook
Bottom
Main Unit
Hook
Receiver
Latch
Top Main Unit
Bottom
Main Unit
Richell

Designed by:
Richell Corporation, Japan
Distributed by:
Richell USA, Inc.
Grand Prairie, Texas 75050
Phone [phone] Fax [phone]
Visit us at www.richellusa.com
Made in Japan
How to Attach to the Seat Belt
How to Storage
How to Clean
Specifications
lPlease note that product specifications and design may change without prior notice for the purpose of quality improvement.
lIf you find something wrong with this product, please let us know. Thank you!
UPC
lThis product is designed to attach to the 3-point Seat Belt. Do not use for the 2-point Seat Belt. Not for use with automatic seat belts or
vehicles with no seat belts.
Slide the Door Lock and remove the
Door from Main Unit. Unlock the Latches and separate Top and Bottom Main Unit. Stack the Top and Bottom Main Unit.
Then Lock the Latches. Place the Door
between the Top and Bottom Main Unit
for convenient storage.
Place this product in the car seat and make sure the Door
faces the front of the vehicle. Then attach the Lap Seat
Belt to the Seat Belt Hook. Then lock the seat belt in place.
Make sure the seat belt locks correctly. Hold
this product and the Lap Seat Belt and pull
the Shoulder Seat Belt as shown above.
Shoulder
Seat Belt
Seat Belt Hook
Lap Seat Belt
Top view of this product
Seat Belt Hook
lUse a mild detergent and water and clean with a soft cloth/sponge. Cleaning with a scrub brush and/or using a polishing powder may cause
scratchs, rust and/or discoloring of this product.
lWhen using creosol or other disinfectants, make sure to dilute them, otherwise discoloration may occur.
lDo not use harsh chemicals such as thinner, benzene or alcohol as these may cause damage/discoloration.
lAfter cleaning, wipe dry with soft cloth or place in a shaded area to air dry; do not place product in direct sunlight.
Dimension
Material
803840 80019-5 / 803840 80020-1 / 803840 80021-8 803840 80022-5 / 803840 80023-2 / 803840 80024-9
12.4"W x 18.5"D x 11.2"H 14.4"W x 22.4"D x 14.4"H
Main Unit (Handle, Case for Door Lock, Straps Connector): Polypropylene
Latch, Latch Axis, Door Lock:ABS Door, Door Axis: Steel (Polyester coating)
Spring: Stainless-steel Top Door: Polycarbonate Top Door lock, Top Door Axis: ABS
Case for Top Lock: Polypropylene
2004