Ricoh SP 213SFw User manual

1
SP 210/SP 210SU/SP 210SF/
SP 211/SP 211SU/SP 211SF/
SP 212w/SP 212Nw/SP 212SUw/SP 212SNw/SP 212SFw/SP 212SFNw/
SP 213w/SP 213Nw/SP 213SUw/SP 213SNw/SP 213SFw/SP 213SFNw
Setup Guide
Installationsanleitung Manuel d’installation Guida all’installazione Installationsvejledning
Guía de instalación Installatiehandleiding Oppsettveiledning Guia de Configuração
Guia de instalação Asennusohje Installationsguide Průvodce instalací
Telepítési útmutató Podręcznik instalacji Kurulum Rehberi Руководство по установке
Read this manual carefully before you use this machine and keep it handy for future reference. For safe and
correct use, be sure to read Safety Information before using the machine. This manual briefly describes
the procedure for installing this machine. For more details about other information, see User Guide in the
CD‑ROM .
Lesen Sie dieses Handbuch sorgfältig durch, bevor Sie dieses Gerät verwenden, und heben Sie es für Refe‑
renzzwecke sorgfältig auf. Für eine sichere und ordnungsgemäße Verwendung lesen Sie die Sicherheitshin‑
weise, bevor Sie das Gerät verwenden. Dieses Handbuch beschreibt die Installation dieses Geräts in Kurz‑
form. Weitere Einzelheiten zu anderen Informationen finden Sie in der Anwenderanleitung auf CD‑ROM .
Lisez attentivement le présent manuel avant d’utiliser cet appareil et conservez‑le dans un endroit accessi‑
ble afin de pouvoir vous y reporter ultérieurement. Pour une utilisation correcte et sûre, lisez les Consignes
de sécurité avant d’utiliser l’appareil. Le présent manuel décrit brièvement la procédure d’installation de cet
appareil. Pour plus de détails relatifs à d’autres sujets, reportez‑vous au Guide utilisateur se trouvant sur le
CD‑ROM .
Leggere attentamente questo manuale prima di utilizzare la macchina e tenerlo a disposizione per poterlo
consultare quando necessario. Per un uso sicuro e corretto, leggere Informazioni sulla sicurezza prima di
utilizzare l’apparecchiatura. Il presente manuale descrive brevemente la procedura per l’installazione della
macchina. Per ulteriori informazioni, vedere Guida per l’utente nel CD‑ROM .
Læs denne vejledning grundigt, inden maskinen benyttes, og opbevar den et lettilgængeligt sted. Husk først
at læse Sikkerhedsoplysninger for sikker og korrekt brug af maskinen. Denne vejledning beskriver proceduren
for installation af denne maskine. Oplysninger om andre emner findes i brugervejledningen på cd‑rommen .
Lea detenidamente este manual antes de utilizar la máquina y téngalo a mano para futuras consultas. Para
un uso correcto y seguro, lea la Información de seguridad antes de utilizar la máquina. Este manual describe
brevemente el procedimiento de instalación de la máquina. Para más información, consulte la Guía de usuario
del CD‑ROM .
Lees deze handleiding aandachtig door voordat u dit product in gebruik neemt en houd deze handleiding in
de buurt voor toekomstig gebruik. Voor een veilig en correct gebruik dient u de Veiligheidsinformatie te lezen
voordat u het apparaat gaat gebruiken. In deze handleiding wordt de procedure voor de installatie van dit ap‑
paraat kort beschreven. Voor meer informatie, zie de Gebruikershandleiding op de cd‑rom .
Les denne veiledningen nøye før du tar maskinen i bruk, og oppbevar den lett tilgjengelig for fremtidig oppslag.
Les ”sikkerhetsinformasjon” før du bruker skriveren, for å sikre korrekt og sikker bruk. Denne veiledningen
beskriver kort fremgangsmåten ved installasjon av maskinen. Du finner mer informasjon i «Brukerveiledning»
på CD‑ROM‑platen .
Leia cuidadosamente este manual antes de utilizar o equipamento e guarde‑o num local acessível para futura
referência. Para uma utilização segura e correta, certifique‑se de que lê as Informações de Segurança antes
de utilizar o equipamento. Este manual descreve resumidamente o procedimento para instalação do equipa‑
mento. Para mais informações, consulte o Guia do Utilizador no CD‑ROM .
Leia atentamente este manual antes de usar este equipamento e mantenha‑o à mão para consulta futura.
Para uma utilização segura e correta, certifique‑se de ler as Informações de segurança antes de usar o equi‑
pamento. Este manual descreve resumidamente o procedimento para instalar este equipamento. Para obter
mais detalhes sobre outras informações, consulte o Guia do usuário no CD‑ROM .
Lue ohje huolellisesti ennen laitteen käyttöönottoa ja säilytä se helposti saatavilla tulevaa käyttöä varten. Lue
turvallisuustiedot ennen laitteen käyttämistä. Tässä ohjeessa kerrotaan lyhyesti, miten laite asennetaan. Lisä‑
tietoja, katso Käyttäjän opas laitteen mukana toimitetulla cd‑levyllä .

2
Denna handbok ska läsas noga innan produkten används och sedan förvaras nära till hands för framtida
behov. För säker och korrekt användning ska du läsa avsnittet Säkerhetsinformation innan du använder ma‑
skinen. Den här handboken beskriver kort hur du installerar maskinen. Mer information finns i handboken
Användarhandbok på CD‑ROM‑skivan. .
Před prvním použitím tohoto zařízení si pečlivě přečtěte tuto příručku a mějte ji při ruce pro další využití. Pro
bezpečné a správné použití si před použitím zařízení přečtěte část Bezpečnostní informace. Tato příručka
stručně popisuje postup instalace tohoto přístroje. Podrobnosti ohledně dalších informací viz Uživatelská pří‑
ručka na CD-ROM .
A készülék használata előtt figyelmesen olvassa el ezt a kézikönyvet, és tartsa könnyen hozzáférhető helyen.
A biztonságos és megfelelő üzemeltetés érdekében a készülék használata előtt olvassa el a Biztonsági tudni‑
valókat. Ez az útmutató a készülék telepítési eljárását mutatja be röviden. További részleteket a CD‑ROM‑on
található felhasználói útmutatóban talál. .
Przed rozpoczęciem użytkowania tego urządzenia należy uważnie przeczytać ten podręcznik i przechowy‑
wać go w łatwo dostępnym miejscu, aby szybko znaleźć potrzebne informacje. Bezpieczne i prawidłowe
korzystanie z urządzenia wymaga wcześniejszego zapoznania się z podręcznikiem Zasady bezpieczeństwa.
Ten podręcznik zawiera skrócony opis procedury instalowania urządzenia. Więcej informacji na temat innych
informacji, patrz Podręcznik użytkownika dostarczony na płycie CD-ROM .
Bu makineyi kullanmadan önce bu kılavuzu dikkatlice okuyun ve daha sonra başvurmak için yakın bir yerde
bulundurun. Güvenli ve doğru kullanım için, makineyi kullanmadan önce Güvenlik Bilgisi'ni okuduğunuzdan
emin olun. Bu kılavuzda bu makinenin kurulum prosedürü kısaca anlatılmaktadır. Başka bilgiler hakkında daha
fazla ayrıntı için, CD-ROM'daki Kullanıcı Rehberi'ne bakın.
Внимательно прочтите данное руководство перед началом работы с аппаратом. Сохраните руко‑
водство и используйте его в качестве справочника. В целях безопасной и правильной работы обя‑
зательно прочтите раздел "Техника безопасности" перед началом эксплуатации аппарата. В данном
руководстве вкратце описана процедура установки этого аппарата. Для получения дополнительной
информации см. "Руководство Пользователя" на прилагаемом компакт-диске .

3
1. Setting Up the Machine
Einrichten des Geräts Paramétrage de l’appareil Configurazione della macchina
Opsætning af maskinen Instalación de la máquina Installatie van het apparaat
Oppsett av maskinen Configurar o equipamento Instalar o equipamento
Laitteen asennus Installera maskinen Nastavení zařízení
A nyomtató üzembe helyezése Konfiguracja urządzenia Makinenin Kurulumu
Настройка аппарата
SP 210SF/SP 211SF/
SP 212SFw/SP 212SNw/SP 212SFNw/
SP 213SFw/SP 213SNw/SP 213SFNw
DCT074
10 cm
(4.0”)
45 cm
(17.8”)
20 cm
(7.9”)
20 cm
(7.9”)
40 cm
(15.8”)
SP 210SU/SP 211SU/
SP 212SUw/SP 213SUw
DCT085
10 cm
(4.0”)
45 cm
(17.8”)
10 cm
(4.0”)
20 cm
(7.9”)
40 cm
(15.8”)
SP 210/SP 211/SP 212w/SP 212Nw/
SP 213w/SP 213Nw
CTT017
10 cm
(4.0”)
45 cm
(17.8”)
10 cm
(4.0”)
20 cm
(7.9”)
40 cm
(15.8”)
Power Source Stromquelle Source d’alimentation Alimentazione
Strømkilde Alimentación eléctrica Stroombron Strømkilde
Fonte de alimentação Fonte de alimentação Virtalähde Strömförsörjning
Napájení Tápellátás Źródło zasilania Güç Kaynağı
Параметры электрической сети
120 V, 60 Hz, 8A•
220 ‑ 240 V, 50/60 Hz, 5A•

4
DCT048
DCT027
DCT071
DCT024
DCT062
CTT049
DCT026
DCT028
DCT063
CTT148

5
CTT213
CTT073
CTT074
DCT032
DCT049
CTT029
To connect to the network via wireless LAN, see Wi‑
Fi Settings Guide. Otherwise, see page 7 "2. Install‑
ing the Software". However, manuals in languages
other than English are on the supplied CD‑ROM .
To read a manual on the CD‑ROM , do as follows:
Zur Verbindung mit dem Netzwerk über WLAN
siehe Handbuch WLAN‑Einstellungen. Oder siehe
Seite 23 "2. Installieren der Software". Handbücher
in anderen Sprachen als Englisch sind auf der mit‑
gelieferten CD‑ROM zu finden. Zum Lesen eines
Handbuchs auf der CD‑ROM :
Pour vous connecter au réseau via LAN sans fil,
voir le Manuel de configuration du Wi‑Fi. Autre‑
ment, reportez-vous à la page 39 "2. Installer le
logiciel". Toutefois, les manuels sont disponibles
dans d’autres langues que l’anglais sur le CD‑ROM
. Pour lire un manuel sur le CD‑ROM , procédez
comme suit :
Per connettersi alla rete tramite wireless LAN, ve‑
dere Guida alle impostazioni Wi‑Fi. In alternativa,
vedere pagina 55 "2. Installare il software". I ma‑
nuali tradotti in diverse lingue si possono comun‑
que trovare nel CD‑ROM fornito . Per leggere il
manuale su CD‑ROM , seguire questa procedura:
For oplysninger om trådløs opkobling, se vejled‑
ningen Indstilling af trådløst netværk. Eller, se side
71 "2. Installation af software". Manualer, på an‑
dre sprog end engelsk, er dog tilgængelige på den
medfølgende cd‑rom . For at læse en manual på
cd‑rommen , gør følgende:
Para conectar a la red a través de la LAN inalám‑
brica, consulte la Guía de Configuración del Wi‑Fi.
O bien consulte la página 87 "2. Instalación del
software". Los manuales en otros idiomas diferen‑
tes del inglés se incluyen en el CD‑ROM . Para
consultar un manual en el CD‑ROM , siga este
procedimiento:
Om verbinding te maken met het netwerk via draad‑
loos LAN, zie de Handleiding WiFi-instellingen. Zie
anders pagina 103 "2. De software installeren". Hand‑
leidingen in een andere taal dan Engels kunt u vinden
op de meegeleverde cd‑rom . Ga als volgt te werk
om een handleiding te raadplegen op de cd‑rom :

6
Se innstillingsveiledningen for Wi‑Fi for informasjon
om hvordan du kobler til nettverket via trådløst LAN.
Se ellers side 119 "2. Installere programvaren". Bru‑
kerhåndbøker på andre språk enn engelsk finnes på
den medfølgende CD‑ROM‑en . Hvis du vil lese en
brukerhåndbok på CD‑ROM‑en , gjør du følgende:
Para ligar a uma rede via wireless, consulte o Guia
de Definições de Wi‑Fi. Como alternativa, consulte
a página 135 "2. Instalar o Software". Os manuais
nos idiomas que não o inglês estão no CD‑ROM
fornecido . Para ler um manual no CD‑ROM ,
proceda da seguinte forma:
Para se conectar à rede via LAN sem fio, consulte
o Guia de definições de Wi‑Fi. Ou então, consulte
a página 151 "2. Instalar o software". Observe que
os manuais em idiomas diferentes do inglês estão
incluídos no CD‑ROM fornecido . Para ler um ma‑
nual no CD‑ROM , faça o seguinte:
Jos käytät langatonta verkkoyhteyttä, katso WiFi‑
asetusopas. Jos et, katso sivu 167 "2. Ohjelmiston
asentaminen". Muut oppaiden kieliversiot löytyvät
laitteen mukana toimitetulta cd‑levyltä . Voit lukea
cd‑levyllä olevia oppaita seuraavasti:
För att ansluta till nätverket via trådlöst LAN, se Wi‑
Fi Settings Guide (Handbok för WiFi‑inställningar).
Om inte se sid 183 "2. Installera programvaran".
Handböcker på andra språk än engelska finns på
den medföljande CD‑ROM‑skivan . För att läsa en
handbok på CD‑ROM‑skivan , gör du så här:
Chcete-li se připojit k síti prostřednictvím bezdrátové
sítě LAN, viz příručka Průvodce nastavením Wi-Fi.
Anebo také viz strana 199 "2. Instalace softwaru".
Nicméně manuály v jiných jazycích něž v angličtině
jsou pouze na dodávaném disku CD‑ROM . Chcete‑
li číst návod na CD-ROM , postupujte následovně:
A hálózathoz vezeték nélküli LAN használatával tör‑
ténő csatlakozásról lásd a Wi-Fi beállítási útmutatót.
Továbbá, lásd a 215. oldalon a "2. Szoftver telepíté‑
se" című részt. Azonban, az angol nyelven kívül a
kézikönyvek a készülékhez mellékelt CD‑ROM‑on
találhatók. A CD‑ROM‑on található kézikönyv
olvasásához tegye a következőket:
Aby podłączyć się do sieci poprzez sieć bezprzewo‑
dową, patrz Przewodnik po ustawieniach sieci bez‑
przewodowej. W przeciwnym razie, patrz strona 231
"2. Instalacja oprogramowania". Jakkolwiek, podręcz‑
niki w językach innych niż angielski dołączone są na
płycie CD-ROM . Aby przeczytać podręczniki na
płycie CD-ROM , postępuj w następujący sposób:
Kablosuz LAN ile ağa bağlanmak için, bkz. Wi-Fi Ayar‑
ları Rehberi. Aksi halde, bkz. sayfa 247 "2. Yazılımı
Kurma". Ancak, İngilizce dışındaki dillerdeki kılavuzlar
verilen CD‑ROM içinde bulunmaktadır. CD-ROM
içinde bulunan bir kılavuzu okumak için, şunları yapın:
Для получения сведений о подключении к бес‑
проводной ЛВС см. Руководство по настройке
беспроводной связи стандарта Wi-Fi. В про‑
тивном случае см. стр. 263 "2. Установка про‑
граммного обеспечения". Однако руководства
на других языках, кроме английского, находятся
на прилагаемом компакт-диске. . Для изучения
руководства, записанного на компакт-диске ,
выполните следующие действия:
DAC345
DCT073
DCT092
CXP074

7
2. Installing the Software
Checking the available connection
SP 210/SP 210SU/SP 210SF/
SP 211/SP 211SU/SP 211SF
SP 212w/SP 212SUw/
SP 212SFw/SP 213w/
SP 213SUw/SP 213SFw
SP 212Nw/SP 212SNw/
SP 212SFNw/SP 213Nw/
SP 213SNw/SP 213SFNw
USB Available Available Available
Ethernet Not available Not available Available
Wi-Fi Not available Available Available
USB•
To install the software over a USB connection, a USB cable and the supplied CD‑ROM are required.
Ethernet•
To install the software over a network connection, a network cable and the supplied CD‑ROM are•
required.
To automatically obtain the IP address, a router with a built‑in DHCP server is required.•
Ethernet and wireless LAN settings cannot be enabled at the same time.•
Wi‑Fi•
To connect to the network via wireless LAN, see Wi‑Fi Settings Guide.•
To automatically obtain the IP address, a router with a built‑in DHCP server is required.•
Ethernet and wireless LAN settings cannot be enabled at the same time.•
If WPS cannot be used with SP 212w/SP 212Nw/SP 213w/SP 213Nw, first connect the machine and•
computer via a USB cable, install Smart Organizing Monitor only, and then configure the Wi‑Fi set‑
tings. Next, connect the machine to the network, and then install the printer driver only.

8
Checking the flowchart
USB Connection
DCT075
Connecting the Machine via USB (See page 9)
Quick Install for USB (See page 10)
Network Connection (IPv4 Environment)
DCT076
Connecting the Machine via Network (See page 12)
Selecting the Type and Method of IP Address Configuration (See page 13)
Connecting the Computer and Machine (See page 14)
Printing a Configuration Page (See page 15)
Changing the IP Address Settings (See page 16)
Quick Install for Network (See page 16)
If WPS cannot be used with SP 212w/SP 212Nw/SP 213w/SP 213Nw
USB Connection
Configuring Wireless LAN Settings (See "3. Configure the Wireless LAN (SP 212w/SP
212Nw/SP 213w/SP 213Nw)", Wi-Fi Settings Guide)
Network Connection (IPv4 Environment)

9
Connecting the Machine via USB
This section explains how to connect the machine to a computer using a USB cable, and how to install the
software using "Quick Install for USB".
"USB Quick Install" cannot be used to install the PC FAX driver. If you want to use the PC FAX driver for SP •
210SF/SP 211SF/SP 212SFw/SP 212SFNw/SP 213SFw/SP 213SFNw, install the PC FAX driver only. For
details about how to install the driver, see "Installing the Driver and Software", User Guide .
DCT043
USB Quick Install
The software to be installed differs depending on the model being used.
SP 210/SP 211/SP 212w
SP 212Nw/SP 213w/SP 213Nw
SP 210SU/SP 211SU
SP 212SUw/SP 212SNw
SP 213SUw/SP 213SNw
SP 210SF/SP 211SF
SP 212SFw/SP 212SFNw
SP 213SFw/SP 213SFNw
Printer driver•
Smart Organizing Monitor•
Printer driver•
TWAIN/WIA driver•
Printer driver•
TWAIN/WIA driver•

10
Quick Install for USB
Do not turn the machine on until prompted to do so in the installer window. If you connect the machine to the•
computer when it is on, you will be unable to install the driver correctly.
DCT070
Do not connect the USB cable to the machine until prompted to do so in the installer window. If you connect•
the machine to the computer before the prompt appears, the machine will be identified prematurely by the
computer and you will be unable to install the driver correctly.
CXP122
Make sure the machine is off.
Turn on the power of the computer.
Insert the CD-ROM into the CD-ROM drive.
CXP066
Select a language and product for the interface, and then click [OK].
Click [USB Quick Install].
If WPS cannot be used with SP 212w/SP 212Nw/SP 213w/SP 213Nw, click [Smart Organizing Monitor].
DCT045

11
Follow the instructions in the installation wizard.
If a message to turn on the power and connect the USB cable appears, do the following:
Connect the machine and computer with a USB cable.•
CTT137
Turn the power on.•
1.
1
2
DCT072
2.
DCT069

12
Connecting the Machine via Network
This section explains how to connect the machine to a computer using a network cable, and how to install the
software using "Quick Install for Network".
"Network Quick Install" cannot be used to install the PC FAX driver. If you want to use the PC FAX driver for •
SP 212SFw/SP 212SFNw/SP 213SFw/SP 213SFNw, install the PC FAX driver only. For details about how to
install the driver, see "Installing the Driver and Software", User Guide .
DCT044
Network Quick Install
The software to be installed differs depending on the model being used.
SP 212w/SP 212Nw
SP 213w/SP 213Nw
SP 212SUw/SP 212SNw
SP 213SUw/SP 213SNw
SP 212SFw/SP 212SFNw
SP 213SFw/SP 213SFNw
Printer driver•
Smart Organizing Monitor•
Printer driver•
TWAIN/WIA driver•
Printer driver•
TWAIN/WIA driver•

13
Selecting the Type and Method of IP Address Configuration
What is an IP address?
The IP address is an identification number allocated to computers and other devices connected to an IP
network. An IP address is an address for use on a network. There are two types of IP address: IPv4 and
IPv6.
IPv4 address•
The IPv4 address consists of four fields, such as "192.168.0.113".
The first three fields (192.168.0) are fixed, and the last one (113) is variable.
192. 168. 0. 113
DCT046
DCT150
1
2 3 4
192. 168. 0. 111
192. 168. 0. 113 192. 168. 0. 114192. 168. 0. 112
1. Router
2. Another computer
3. Machine
4. Your computer
IPv6 address•
Because IPv4 addresses are running out as a result of the widespread use of the Internet, IPv6 has been
developed as a next generation Internet protocol.
Specifying the IP Address
You can specify the IP address as follows:
Obtaining the IP address from the DHCP server•
Specifying a static IP address manually•
What is a DHCP?
DHCP is a networking protocol that automatically assigns an IP address and other information to the con‑
nected device. You can automatically obtain the IP address by enabling the machine's DHCP setting.

14
Connecting the Computer and Machine
If you are using the machine in a wireless LAN environment, make sure the network cable is disconnected.•
Proceed to Step 3.
Connect the network cable to the Ethernet port.
CTT138
Plug the other end of the cable into a network device, such as a hub.
Connect the power cord.
1
2
DCT072
Turn on the power.
DCT069

15
Printing a Configuration Page
Before you install the software, print the configuration page to check the network information.
SP 212w/SP 212Nw/SP 213w/SP 213Nw
Turn off the power.
While holding the [Stop/Start] key down, switch the power on and do not release the [Stop/Start]
key until 13 seconds elapse.
CTT175
Check the IP address on the configuration page.
The address appears under Host Interface.
If the IPv4 address is not automatically assigned by the DHCP server, the machine automatically selects
an unused IPv4 address starting with "169.254.xxx.xxx" (Auto IP function).
SP 212SUw/SP 212SNw/SP 212SFw/SP 212SFNw/
SP 213SUw/SP 213SNw/SP 213SFw/SP 213SFNw
Press the [User Tools] key.
DCT845
Press the [ ] or [ ] key to select [Print List/Report], and then press the [OK] key.
Press the [ ] or [ ] key to select [Configuration Page], and then press the [OK] key.

16
Press [Yes] in the confirmation screen.
DCT059
Check the IP address on the configuration page.
The address appears under Network Settings.
If the IPv4 address is not automatically assigned by the DHCP server, the machine automatically selects
an unused IPv4 address starting with "169.254.xxx.xxx" (Auto IP function).
Changing the IP Address Settings
To configure the IP address manually, it is necessary to specify the IP address‑related settings. For details,
see page 19 "3.Appendix".
SP 212w/SP 212Nw/SP 213w/SP 213Nw
Use Smart Organizing Monitor to connect the machine to the network. Install Smart Organizing Monitor
first on a computer on the same network.
For details, see "Installing the Driver and Software", User Guide .
SP 212SUw/SP 212SNw/SP 212SFw/SP 212SFNw/
SP 213SUw/SP 213SNw/SP 213SFw/SP 213SFNw
Configure network settings using the control panel.
Quick Install for Network
Turn on the power of the computer.
Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
CXP066
Select a language and product for the interface, and then click [OK].

17
Click [Network Quick Install].
If WPS cannot be used with SP 212w/SP 212Nw/SP 213w/SP 213Nw, click [PCL Printer Driver].
DCT091
Read the entire license agreement carefully. If you accept its terms, click [I accept the agreement.],
and then click [Next >].
Select [Add a new printer], and then click [Next>].
Select the printer detection method, and then click [Next>].
To search for printers automatically, select [Search for printers automatically].•
To search for a printer by its IP address, select [Search for printers by specified IP Address].•
To select a port or specify a new port, select [Select a port or specify a new port]. If a dialog box for se‑•
lecting the port type appears, it is recommended to select the standard TCP/IP port.
Follow the instructions in the installation wizard.

18
Troubleshooting
USB Connection
The plug-in launcher does not work.
1. Check that the CD‑ROM is inserted properly and is undamaged.
2. Check that the CD‑ROM drive is working properly.
When you cannot install properly.
1. Check that the USB cable is connected properly and is undamaged.
2. Quit all other applications when installing software.
Installation may be disrupted if other applications are open. Also, quit any anti‑virus applications that
are running.
3. From Control Panel, open "Printers and Faxes", delete the machine's icon, then reinstall the driver.
Network Connection
The plug-in launcher does not work.
1. Check that the CD‑ROM is inserted properly and is undamaged.
2. Check that the CD‑ROM drive is working properly.
When you cannot install properly.
1. Check that the network cable is connected properly and is undamaged.
2. Check the machine's IP address and network configuration.
To install a file, an IP address on the same local area network must be specified. The machine and
computer may not be on the same network.
3. Check whether the DHCP server is working.

19
3.Appendix
This section explains how to configure the machine’s IP address.
The setting procedure depends on the machine model.
SP 212SUw/SP 212SNw/SP 212SFw/SP 212SFNw/
SP 213SUw/SP 213SNw/SP 213SFw/SP 213SFNw
Using the control panel•
See page 19 "Configuring the IP Address Settings Using the Control Panel".
Using the Web Image Monitor•
See page 21 "Configuring the IP Address Settings Using the Web Image Monitor".
SP 212w/SP 212Nw/SP 213w/SP 213Nw
Using the Smart Organizing Monitor•
See page 22 "Configuring the IPv4 Address Settings Using the Smart Organizing Monitor".
Using the Web Image Monitor•
See page 21 "Configuring the IP Address Settings Using the Web Image Monitor".
Configuring the IP Address Settings Using the Control Panel
Configuring the Machine's IPv4 Address Automatically
Press the [User Tools] key.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
Press the [ ] or [ ] key to select [IPv4 Configuration], and then press the [OK] key.
Press the [ ] or [ ] key to select [DHCP], and then press the [OK] key.
Press the [ ] or [ ] key to select [Active], and then press the [OK] key.
Press the [User Tools] key to restart the machine.
The specified setting is applied.

20
Configuring the Machine's IPv4 Address Manually
Press the [User Tools] key.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
Press the [ ] or [ ] key to select [IPv4 Configuration], and then press the [OK] key.
Press the [ ] or [ ] key to select [DHCP], and then press the [OK] key.
Press the [ ] or [ ] key to select [Inactive], and then press the [OK] key.
Press the [ ] or [ ] key to select [IP Address] , and then press the [OK] key.
Enter the machine’s IPv4 address using the number keys.
Press the [ ] or [ ] key to move between fields.
Enter the values in all fields, and then press the [OK] key.
Specify the subnet mask and default gateway address as required in accordance with the network environ‑
ment.
Press the [User Tools] key to restart the machine.
The specified setting is applied.
For details about configuring the IPv6 address, see the User Guide• .
You cannot configure the network settings while the machine is operating (printing, receiving a fax, etc.). •
Correspondingly, the machine cannot receive print jobs and faxes while the network settings are being con‑
figured (after clicking [Network Settings]).