Ricoh PJ LU8000 Series User manual

Read this manual carefully before you use this machine and keep
it handy for future reference. For safe and correct use, be sure to
read the Precautions in this manual before using the machine.
Appendices
User Controls
Installation
Introduction
4.
3.
2.
1.
User’s Manual
RICOH PJ WUL6380/PJ LU8000 Series

2
Safety Information
This chapter describes safety information for this machine.
Information
Introduction
This manual contains detailed instructions and notes on the operation and use of
this machine. For your safety and benet, read this manual carefully before using
the machine. Keep this manual in a handy place for quick reference.
Important
Contents of this manual are subject to change without prior notice.
In no event will the company be liable for direct, indirect, special, incidental, or
consequential damages as a result of handling or operating the machine.
Some illustrations in this manual might be slightly different from the machine.
Caution
The manufacturer shall not be responsible for any damage or expense that might
result from the use of parts other than genuine parts from the manufacturer with
your ofce products.

3
Safety Information
When using this machine, the following safety precautions should always be
followed.
Safety During Operation
In this manual, the following important symbols are used:
WARNING
Indicates a potentially hazardous situation which, if instructions are not followed,
could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if instructions are not followed,
may result in minor or moderate injury or damage to property.
Safety Precautions to Be Followed
This section explains safety precautions that should always be followed when using
this machine.
Environments where the machine can be used
This section explains safety precautions about environments where the machine
can be used.
WARNING
Do not place vases, plant pots, cups, toiletries, medicines, small metal
objects, or containers holding water or any other liquids, on or close to this
machine. Fire or electric shock could result from spillage or if such objects or
substances fall inside this machine.
WARNING
Keep the product and attachments out of the reach of children. If the product
is near children, it might fall over and cause an injury.

4
CAUTION
Keep the machine away from humidity and dust. Otherwise a re or an
electric shock might occur.
CAUTION
Do not place any objects on the machine. Doing so may cause the machine
to topple over, possibly resulting in injury.
CAUTION
Do not place the machine on an unstable or tilted surface. If it topples over,
an injury might occur.
CAUTION
Do not place the product or use it in an environment where it might get wet
such as from snow, rain, or being near water. Doing so could result in re or
electric shock.
CAUTION
Do not put your face or hand near the exhaust vents. Doing so could result in
burns or an accident due to hot air coming from the exhaust vents.
CAUTION
Do not use the product on soft material such as paper or cloth that might get
sucked into the intake vents. Doing so may cause heat buildup inside the
product, resulting in malfunction, burns, or re.
CAUTION
Do not use ammable sprays or solvents in the vicinity of this machine. Also,
avoid placing these items in the vicinity of this machine. Doing so could result
in re or electric shock.
CAUTION
Do not place the power cord and connection cable in a way that might cause
someone to trip and fall. The product might fall over and cause an injury.

5
CAUTION
Do not place the product in a location where air ow is poor. Doing so may
cause re due to internal components becoming overheated.
CAUTION
Do not place or store the product in a location where direct sunlight or heat
generation might occur. The heat may deform or wear out the exterior parts
or negatively affect internal parts. Doing so could result in re.
CAUTION
Do not place low heat resistant material near the exhaust vents. Hot air
may come from the exhaust vents, resulting in damage to the product or an
accident.
CAUTION
Do not expose the product to salt air or corrosive gas. Also, do not place the
product in a laboratory or other location where a chemical reaction might
occur. Doing so may cause the product to malfunction.
CAUTION
Do not obstruct the machine’s vents. Doing so risks re caused by
overheated internal components.

6
Handling power cords and power cord plugs
This section explains safety precautions about handling power cords and power
cord plugs.
WARNING
Do not use any power sources other than those that match the specications
shown. Doing so could result in re or electric shock.
WARNING
Do not use any frequencies other than those that match the specications
shown. Doing so could result in re or electric shock.
WARNING
Do not damage, break, or modify the power cord. Also, do not place heavy
objects on the power cord, or pull the cord or bend it severely. Doing so could
result in re or electric shock.
WARNING
Touching the prongs of the power cable’s plug with anything metallic
constitutes a re and electric shock hazard.
WARNING
The supplied power cord is for use with this machine only. Do not use it with
other appliances. Doing so could result in re or electric shock.
WARNING
It is dangerous to handle the power cord plug with wet hands. Doing so could
result in electric shock.
WARNING
Be sure to locate the machine as close as possible to a wall outlet. This will
allow easy disconnection of the power cord in the event of an emergency.

7
WARNING
Be sure to disconnect the plug from the wall outlet at least once a year.
There are burn marks on the plug.
The prongs on the plug are deformed.
If any of the above conditions exist, do not use the plug and consult your
dealer or service representative. Use of the plug could result in re or electric
shock.
WARNING
Be sure to disconnect the power cord from the wall outlet at least once a
year.
The power cord’s inner wires are exposed, broken, etc.
The power cord’s coating has a crack or dent.
When bending the power cord, the power turns off and on.
Part of the power cord becomes hot.
The power cord is damaged.
If any of the above conditions exist, do not use the power cord and consult
your dealer or service representative. Use of the power cord could result in
re or electric shock.
WARNING
Do not use the connection cable if it is deformed, cracked, or damaged.
Doing so could result in re or electric shock. If the connection cable is
deformed, cracked, or damaged, contact your service representative to
request a replacement cable.
WARNING
When using an extension cord or power strip, only connect equipment whose
total power consumption is within the power rating for the extension cord or
power strip. If the power rating is exceeded, it may cause heat buildup and
result in re.
WARNING
Do not place the power cord and connection cable in front of the lens or
exhaust vents when the product is turned on. Doing so may result in re.

8
CAUTION
Push the power plug all the way into the power outlet. Do not use a power
outlet with a loose connection. Doing so may result in heat buildup. Plug the
power cord in the correct direction into the base. If they are not plugged in
correctly, it could result in smoke, re, or electric shock.
CAUTION
If this machine is not going to be used for several days or longer at a time,
disconnect its power cord from the wall outlet.
CAUTION
When disconnecting the power cord from the wall outlet, always pull the plug,
not the cord. Pulling the cord can damage the power cord. Use of damaged
power cords could result in re or electric shock.
CAUTION
Be sure to disconnect the plug from the wall outlet and clean the prongs and
the area around the prongs at least once a year. Allowing dust to build up on
the plug constitutes a re hazard.
CAUTION
When performing maintenance on the machine, always disconnect the power
cord from the wall outlet.

9
Handling the main machine
This section explains safety precautions about handling the main machine.
WARNING
If the machine emits smoke or odours, or if it behaves unusually, you
must turn off its power immediately. After turning off the power, be sure
to disconnect the power cord plug from the wall outlet. Then contact your
service representative and report the problem. Do not use the machine.
Doing so could result in re or electric shock.
WARNING
If metal objects, or water or other uids fall inside this machine, you must turn
off its power immediately. After turning off the power, be sure to disconnect
the power cord plug from the wall outlet. Then contact your service
representative and report the problem. Do not use the machine. Doing so
could result in re or electric shock.
WARNING
Do not touch this machine if a lightning strike occurs in the immediate vicinity.
Doing so could result in electric shock.
WARNING
The following explains the warning messages on the plastic bag used in this
product’s packaging.
Keep the polythene materials (bags, etc.) supplied with this machine
away from babies and small children at all times. Suffocation can result if
polythene materials are brought into contact with the mouth or nose.
WARNING
If the machine topples, or if a cover or other part gets broken, you must turn
off its power immediately. After turning off the power, be sure to disconnect
the power cord plug from the wall outlet. Then contact your service represen-
tative and report the problem. Do not use the machine. Doing so could result
in re or electric shock.

10
WARNING
Contact your sales or service representative to clean or replace parts for a
projector that is installed on a wall or ceiling.
Do not attempt to clean or replace parts for a projector that is installed in
a high location on a wall or ceiling. Doing so may cause it to fall down,
resulting in an injury.
WARNING
If a projector is incorrectly installed on a wall or ceiling, it may fall down and
cause an injury. For users, do not install the projector by yourself. Contact
your sales or service representative if you want to install a projector on a wall
or ceiling.
For sales or service representatives:
Use brackets that are strong enough to support the projector. The
projector weighs about 23kg (50.7lb) (Projector weight without lens).
The projector must be installed in a location that is sturdy enough to
support the full weight of the projector and brackets.
Use only the screws (four M6~10 screws) provided with the projector to
attach the brackets to the projector.
CAUTION
The machine may be very hot after it is turned off, especially the vents and
the lower part of the unit where the laser is located. Avoid touching these
areas. Doing so may result in burns.
CAUTION
Do not place the product on other equipment or vice versa. Doing so may
cause heat buildup inside the product or cause the other equipment to
malfunction.
CAUTION
Do not increase the volume unless you are listening while increasing the
volume. Also, lower the volume before turning off the power, because a
loud sound may be emitted when the power is turned on and cause hearing
damage.