RIDGID 68131 User manual

led scene lighting
parts included
- Cradle
- Mounting Hardware
2x10 115
º
led Scene light
installation instructions
2x10 115ºLED Scene Light - White (DC Power)
2x10 115ºLED Scene Light - Black (DC Power)
Thank you for purchasing the Rigid Industries 2x10 LED Scene Lights.
Installation is fairly simple with the right tools and good mechanical abilities.
If you are not condent in your mechanical skills, please seek the help of a
professional to perform the installation. Please read through all of these
instructions and tips before proceeding with installation.

Always disconnect battery before servicing any fuses or electrical system.
Drill appropriate mounting holes onto application surface.
Step 1
Secure Cradle to application surface. See Figure 1.
Step 2
1
5
6
7
8
Figure 1
Item
1
2
3
4
5
6
7
8
9
Qty
1
2
2
1
1
1
2
2
2
Description
Cradle
¼-20 X 1 Hex Head Screw S/S
¼-20 nylon Insert Lock Nut S/S
¼ Flat Washer .625 OD
5/16-18 X1 Short Neck Carriage Bolts SS/Chrome
5/16 Flat Washers ¾” OD .050 Thick 316 S.S.
5/16 Medium Lock Washers 316 SS
5/16-18 Hex Finish Nuts SS/Chrome
Mount Bushings

1
3
4
2
3
9
4
Figure 2
Secure light to cradle mount. See Figure 2.
Step 3
Wire the pigtail leads to power source (Black: Negative, Red: Positive).
Adjust the projection angle prior to tightening all hardware.
Step 4

Your installation is now complete.
Welcome to the Rigid Nation!
779 N Colorado St, Gilbert, AZ 85233 • 1-855-760-5337 • www.rigidindustries.com
Follow us on facebook at
facebook.com/RigidIndustries
PKG-IS-126-Rev01
Warranty Periods:
• All LED Lights – Limited Lifetime
• Accessories and Mounts – 2 years
Warranty Coverage:
To begin your warranty claim, you must have a Return Merchandise Authorization (RMA) number. To get
your RMA number, please contact our warranty department by phone at 480-655-0100 ext. 1008, or by
lling out the Return Merchandise Authorization Form on our website.
All of the following will immediately void all warranties:
• Customer negligence – The customer has modied the light and/or is not using it for the recommend application.
• Customer abuse – Damage to the light beyond normal wear and tear.
• Repair work done by unauthorized personnel without Rigid Industries’approval.
• If the light has been opened or any screws have been removed.
All warranties are non-transferable. Warranty terms and policies are subject to change without notice.
*For all information regarding the Rigid Industries’ Limited Lifetime Warranty please call 855-760-5337 ext. 1008,
email [email protected], or visit our warranty page online at RigidIndustries.com/About/Warranty.
• Flashlights – 1 year
• Batteries – 90 days
Rigid Industries warrants that this product will be free from defects in material and workmanship. If you believe your
Rigid Industries product is defective, it must be returned to Rigid Industries for inspection by our warranty claims
department. If, after inspection, Rigid Industries veries that the defect was not caused by negligence, abuse,
unauthorized repair or disassembly, Rigid Industries will determine whether the product will be repaired or replaced
in accordance with Rigid Industries Limited Lifetime Warranty*.
Warranty Information