RigExpert AA-230 ZOOM Mounting instructions

RigExpert AA-230 ZOOM
1. Software manual 20/03/2019
AA-230 ZOOM
Antenna and cable
analyzer
Software manual

RigExpert AA-230 ZOOM
2. Software manual 20/03/2019
(Top)
Table of contents
Connecting RigExpert AA-230 ZOOM to your computer...........................................4
Updating the firmware ..............................................................................................5
AntScope program.....................................................................................................6
Settings ..................................................................................................................7
Menu General........................................................................................................7
Menu Updates .......................................................................................................8
Menu QSL Calibration............................................................................................9
Menu Cable..........................................................................................................10
Menu Export en Import .......................................................................................11
Look out ...........................................................................................................11
Menu Print...........................................................................................................11
Menu Screenshot.................................................................................................12
Menu Screenshot from AA ..................................................................................12
Menu Data from AA.............................................................................................12
Explanation of the top menu...............................................................................13
Menu SWR .......................................................................................................13
Data screen......................................................................................................13
Menu Phase .....................................................................................................14
Phase Info ....................................................................................................14
show phase graph............................................................................................14
Menu Z=R +jX...................................................................................................15
Menu Z=RII +jX.................................................................................................16
Menu RL (Return Loss).....................................................................................17

RigExpert AA-230 ZOOM
3. Software manual 20/03/2019
RL (Return Loss) ...........................................................................................17
Show return loss graph....................................................................................17
Menu TDR (Time domain reflectometer) ........................................................18
Time domain reflectometer info .................................................................18
show TDR graph...............................................................................................18
Menu Smith .....................................................................................................19
Info Smith chart .......................................................................................19
How to use AntScope...............................................................................................20
Time domain reflectometer (TDR) mode.............................................................21
Calibration mode .................................................................................................21

RigExpert AA-230 ZOOM
4. Software manual 20/03/2019
(Top)
Connecting RigExpert AA-230 ZOOM to your computer
RigExpert AA-230 ZOOM can be connected to a computer running Windows
2000/2003/XP/Vista/7/8/10, as well as Mac OS (version 10.6 or higher) and Linux
operating systems.
The latest version of the software may be found at the Downloads section of the
http://www.rigexpert.com website. Windows, Mac OS and Linux installers are
available as separate downloads.
The direct link to the software downloads is
http://www.rigexpert.com/index?s=aa230zoom&f=downloads#soft
Important:
To avoid damage caused by possible electrostatic
discharge, always follow this sequence:
1. Connect the coaxial cable to the antenna connector
your analyzer.
2. Connect the analyzer to the USB port of your computer

RigExpert AA-230 ZOOM
5. Software manual 20/03/2019
(Top)
Updating the firmware
A Firmware update tool, available at the Downloads section of our website, will
automatically download new versions of the firmware. Just run the program and
follow on-screen instructions.
The direct link to the Firmware update tool is
https://rigexpert.com/products/antenna-analyzers/aa-230-
zoom/downloads/#firmware
You may also download binary files of the firmware for the off-line updating, if
necessary.
The LCD of the analyzer will flash during the firmware update process.
Notice:
It is safe for the analyzer to cancel the firmware update
process at any time, and then start it over

RigExpert AA-230 ZOOM
6. Software manual 20/03/2019
(Top)
AntScope program
The main function of the AntScope program is to show measurement results on
the “big screen”. The AntScope is a great companion to your RigExpert analyzer
which adds functions previously available in expensive, professional grade
equipment only.

RigExpert AA-230 ZOOM
7. Software manual 20/03/2019
(Top)
Settings
1. Connect your analyzer to the PC as described in section 1 of this manual. Make
sure the analyzer is turned on and is in the “ PC mode ” (the AA-230 ZOOM is
already in the “ PC mode ” once turned on).
2. Run AntScope. Under Windows, the program will automatically detect the virtual
COM port number as well as the analyzer type. For Mac OS and Linux, select
serial device name and analyzer type in the Configure menu.
Menu General
Here you tick everything that applies for your use.
Also select the ITU zone where you are located.

RigExpert AA-230 ZOOM
8. Software manual 20/03/2019
(Top)
Menu Updates
The Updates menu gives you the option to install a downloaded Firmware file.
Either you do this via an Auto Check Updates and click Check Updates.
The AntScope can also automatically search for updates.

RigExpert AA-230 ZOOM
9. Software manual 20/03/2019
(Top)
Menu QSL Calibration
The calibration wizard is started here.
Open: Open file or Start the Open Calibration
Short: Open file or Start the Short Calibration
Load: Open file or Start the Load Calibration

RigExpert AA-230 ZOOM
10. Software manual 20/03/2019
(Top)
Menu Cable
Velocity factor:
Cable lenght:
Cable R0:
Conductive loss :
Dielectric loss:
Transmissission line option:
Do nothing:
Substract cable:
Add cable:
Update graphs:

RigExpert AA-230 ZOOM
11. Software manual 20/03/2019
(Top)
Menu Export en Import
Go to Export to save the current
measurement to a file, then select Import to
retrieve the saved data.
Look out:
If you save a file as NWL with extension .nwl then you have to load this as a .nwl
file.
For instance, CSV data can be easily imported into a
Microsoft Excel sheet. R and X (active and reactive parts of impedance) values are
saved into the CSV file for each point on the graph. To calculate SWR or other
parameters, use corresponding formulas.
Menu Print
Here the image you see in the AntScope main screen can be printed in a PDF file
or saved as a PNG file

RigExpert AA-230 ZOOM
12. Software manual 20/03/2019
(Top)
Menu Screenshot
Will save the data as PNG
Menu Screenshot from AA
Here you become a screenshot of the AA-
230 ZOOM window
And you can Export this file as a PDF or
BMP file or you copied this image to your
clipboard for use it in one or other
document.
Menu Data from AA
This will read the data from your AA-xxx
analyzer

RigExpert AA-230 ZOOM
13. Software manual 20/03/2019
(Top)
Explanation of the top menu
The screenshot below shows a typical AntScope screen:
Menu SWR:
show SWR graph
Data screen
You will see a pop-up data window when the cursor is moved over the graph, and
shows different parameters of a load:

RigExpert AA-230 ZOOM
14. Software manual 20/03/2019
(Top)
Menu Phase:
Phase Info (From Wikipedia, the free encyclopedia)
Phase is the position of a point in time (an instant) on a waveform cycle. A
complete cycle is defined as the interval required for the waveform to return to its
arbitrary initial value.
Phase can also be an expression of relative displacement between two
corresponding features (for example, peaks or zero crossings) of two waveforms
having the same frequency.
In sinusoidal functions or in waves, "phase" has two different, but closely related,
meanings. One is the initial angle of a sinusoidal function at its origin and is
sometimes called phase offset or phase difference. Another usage is the fraction
of the wave cycle that has elapsed relative to the origin
show phase graph

RigExpert AA-230 ZOOM
15. Software manual 20/03/2019
(Top)
Menu Z=R +jX
show R, X, Z (series model)

RigExpert AA-230 ZOOM
16. Software manual 20/03/2019
(Top)
Menu Z=RII +jX
show R, X, Z (parallel model)

RigExpert AA-230 ZOOM
17. Software manual 20/03/2019
(Top)
Menu RL (Return Loss)
RL (Return Loss) (From Wikipedia, the free encyclopedia)
In telecommunications, return loss is the loss of power in the signal
returned/reflected by a discontinuity in a transmission line or optical fiber. This
discontinuity can be a mismatch with the terminating load or with a device
inserted in the line. It is usually expressed as a ratio in decibels (dB);
Where RL(dB) is the return loss in dB, Pi is the incident power and Pr is the
reflected power.
Return loss is related to both standing wave ratio (SWR) and reflection coefficient
(Γ). Increasing return loss corresponds to lower SWR. Return loss is a measure of
how well devices or lines are matched. A match is good if the return loss is high. A
high return loss is desirable and results in a lower insertion loss.
Return loss is used in modern practice in preference to SWR because it has better
resolution for small values of reflected wave
Show return loss graph

RigExpert AA-230 ZOOM
18. Software manual 20/03/2019
(Top)
Menu TDR (Time domain reflectometer)
Time domain reflectometer info (From Wikipedia, the free encyclopedia)
A time-domain reflectometer (TDR) is an electronic instrument that uses time-
domain reflectometry to characterize and locate faults in metallic cables (for
example, twisted pair wire or coaxial cable). It can also be used to locate
discontinuities in a connector, printed circuit board, or any other electrical path.
The equivalent device for optical fiber is an optical time-domain reflectometer.
show TDR graph

RigExpert AA-230 ZOOM
19. Software manual 20/03/2019
(Top)
Menu Smith
Info Smith chart (From Wikipedia, the free encyclopedia)
The Smith chart, invented by Phillip H. Smith (1905–1987), is a graphical aid or
nomogram designed for electrical and electronics engineers specializing in radio
frequency (RF) engineering to assist in solving problems with transmission lines
and matching circuits. The Smith chart can be used to simultaneously display
multiple parameters including impedances, admittances, reflection coefficients,
scattering parameters, noise figure circles, constant gain contours and regions for
unconditional stability, including mechanical vibrations analysis. The Smith chart is
most frequently used at or within the unity radius region.
show Smith chart

RigExpert AA-230 ZOOM
20. Software manual 20/03/2019
(Top)
How to use AntScope:
Type your Frequenz in the Start field and in the Stop field set your end Frequenz
klik on Add and your setup is saved
See that your AA-230 ZOOM is connected with your computer and antenna
Now klik on Single and the the antenna analyzer is create a full report of your
antenna on the selected frequenz, and in the field Name there will create a
datafile with this report.
Continuous mode –restart measurement when it finishes