RIOTEC LS6300F User manual

1
Programming Quick Guide
-LS6300F/LS6320F
Installation
Make sure that the scanner has the correct cable to plug in the PC
as below described:
Reset Configuration to Defaults
(For USB HID)
If you are unsure of the scanner configuration or have scanned
the incorrect codes, please scan from A1 to A2 .This will reset the
scanner to its factory defaults.
A1.
000B0
A.2
0212@
Keyboard Country (FOR USB HID Only)
Scan the appropriate country code as below to program the keyboard
layout for your country or language. As a general rule, the following
characters are supported, but need special care for countries other
than the United States: @ | $ # { } [ ] = / ‘ \ < > ~
USA
(Original setting)
Japan
Denmark
Finland
France
Germany
Italy
Norway
Auto sensing(For LS6320F only)
Enable
Disable
02311
02310
Symbologies –1
ENABLE
CODE 39
DISABLE
ENABLE
UPC-A
DISABLE
ENABLE
EAN-13
DISABLE
ENABLE
EAN-8
DISABLE
ENABLE
CODE 93
DISABLE
ENABLE
CODE 128
DISABLE

2
Symbologies –2
ENABLE
CODABAR
DISABLE
ENABLE
INTERLEAVED 25
DISABLE
ENABLE
INDUSTRIAL 25
DISABLE
ENABLE
MSI
DISABLE
ENABLE
PLESSEY
DISABLE
ENABLE
CODE 11
DISABLE
Symbologies –3
ENABLE
MATRIX 25
DISABLE
ENABLE
POSTCODE 25
DISABLE
ENABLE
AVIATION 25
DISABLE
ENABLE
GS1
Omnidirectional
DISABLE
ENABLE
GS1 Limited
DISABLE
Information in this document is subject to change without notice.
For more information, please visit:
www.riotec.com.tw
R_180502_01