RIOTEC OM7520M User manual

1

Programming Quick Guide
- OM7520M
Installation
Make sure that the scanner has the correct cable to plug in the PC as
below described:
*Note : Please install PL-2303 driver for USB serial
Reset Configuration to Default :
If you are unsure of the scanner configuration or have scanned the
incorrect codes, please scan A1 for USB HID or B1~B2 for RS232 /
USB Serial. This will reset the scanner to its factory defaults.
USB HID
RS232/ USB serial
A1
B1
B2
*Note : Please install PL-2303 driver for USB serial
Keyboard Country (FOR USB HID Only)
Scan the appropriate country code as below to program the keyboard
layout for your country or language. As a general rule, the following
characters are supported, but need special care for countries other
than the United States: @ | $ # { } [ ] = / ‘ \ < > ~
USA
(Original setting)
France
Italy Spanish
Portu
g
uese (Brazil) Portu
g
uese (Portu
g
al)
German
1D Symbologies – 1
ENABLE CODABAR DISABLE
ENABLE CODE 39 DISABLE
ENABLE
Interleaved
25
DISABLE
ENABLE
Industrial
25
DISABLE
1D Symbologies – 2
ENABLE
Matrix 25
DISABLE
ENABLE
CODE 128
DISABLE
ENABLE
GS1-128
DISABLE
ENABLE
UPC-A DISABLE
ENABLE
UPC-E DISABLE
ENABLE
EAN 8 DISABLE
ENABLE
EAN 13
DISABLE

2
1D Symbologies – 3
ENABLE
ISSN DISABLE
ENABLE
GS1DataBar DISABLE
ENABLE
GS1 Databar
Limited DISABLE
ENABLE
GS1 Databar
Expanded DISABLE
ENABLE
ISBN DISABLE
ENABLE
CODE 93
DISABLE
2D Symbologies
ENABLE
PDF 417 DISABLE
ENABLE
QR Code DISABLE
ENABLE
Micro QR
Code DISABLE
ENABLE
Data
Matrix
DISABLE
ENABLE
Aztec
Code
DISABLE
 Information in this document is subject to change without notice.
R_190830_01