Riverside Furniture Myra 59453 User manual

#59453
Uph Arm Chair
Riverside
email: [email protected]
FURNITURE
Made in Viet Nam
Page 1 of 2
Back Assembly
A1 pc. BC
I
EF
Chair Seat Arm (right and
left)
5mm Allen
Wrench
5/16" Spring
Washer
1 pc. 1 pair
G
4 pcs. 9 pcs. 9 pcs.
Besuretocheckallpackingmaterialcarefully
forsmallparts,whichmayhavecomeloose
insidethecartonduringshipment.
D
5 pcs.
Front Leg
2 pcs.
H
N
1 pc.
#8 x 1-1/2"
Wood Screw
Steps:
1. Place the Back Assembly (A) on a soft and smooth surface.
2. Attach Chair Seat (B) to the Back Assembly (A) by using the 3" long Bolt (F) Spring Washer (G)
and Flat Washer (H) into the back corners of the Seat and 2" long Bolt (E) Spring Washer (G) and
Flat Washer (H) into the middle of the Seat, as shown in (Detail A). Do not fully tighten Bolts
until after next step.
A
Detail A
M5/16"-18 x 3"
Long Allen Head
Bolt
5/16" *19*2mm
Flat Washer
M5/16"-18 x 2"
Long Allen Head
Bolt
IEGHF
I
HG
B
J2 pcs.
M1/4"-20 x 1-3/4"
Long Allen Head
Bolt
1/4" Spring
Washer
1/4" *16*2mm
Flat Washer
KM
L2 pcs.
4mm Allen
Wrench
1 pc.
2 pcs. 2 pcs.
Myra
Dining Room
Assembly Instructions
Components and Hardware List

Riverside
email: [email protected]
FURNITURE
Made in Viet Nam
Page 2 of 2
3. Attach Front Legs (D) to the Chair Seat (B) by using the 2" long Bolts (E) Spring Washer (G) and Flat
Washer (H) as shown in (Detail B).
4. Turn the Chair upright on a flat surface to level chair and tighten all Bolts using the Allen Wrench (I).
5. Attach the Left and Right Arms (C) using the 1-3/4" long Bolts (J) Spring washer(K) and Flat washer(M)
to the Seat frame as shown in (Detail C). Attach to the Back Assembly (A) by using Screw (L) as shown
in (Detail D). Tighten all Bolts using the Allen Wrench.
I
E
G
H
Detail B
L
N
M
JK
Detail D
C
L
C
D
Myra
Dining Room
Assembly Instructions
Detail C