Riverside Furniture Allegro 44728 User manual

Riverside
FURNITURE
email: [email protected]
Made in Viet Nam
Page 1 of 3
Allegro Home Office
Assembly Instructions
Components and Hardware List
44728 Desk
FG H
ABC D E
Grommet FlatWasher LockWasher AllenHeadBolt
1/4"x1-1/2"
4mmAllen
Wrench
Key BunFoot Filerod&clips
3pcs. 14pcs. 1pc.14pcs.14pcs.
1set. 11pcs. 2sets.
Step 2: Assemble the seven bun feet onto the
bottom. Carefully set the desk back upright.
Adjustable
Leveler
E
Besuretocheckallpackingmaterialcarefullyforsmallparts,whichmayhavecome
looseinsidethecartonduringshipment.
Step 1: Place the desk on a clean, soft surface such
as a blanket or carpet. Remove and discard the shipping
rails attached to the bottom of the desk.

email: [email protected]
FURNITURE
Riverside Allegro Home Office
Assembly Instructions Made in Viet Nam
Page 2 of 3
Step 3: Place the return on a clean, soft surface such
as a blanket or carpet and assemble the four bun feet onto
the bottom. Carefully set the return back upright.
44728 Return
G
Adjustable
Leveler
E
B
C
D
Step 4: Assemble the Back Panel to the desk and the return, using the Allen-Head Bolts (D), Lock
Washers (C) and Flat Washers (B). Tighten the Allen Bolts using the Allen Wrench (E).
BackPanel

email: [email protected]
FURNITURE
Riverside Allegro Home Office
Assembly Instructions Made in Viet Nam
Page 3 of 3
44728 L-Desk & Return
Pinch Point.
Keep fingers from
underneath drawer
front when
releasing.
WARNING
E
B
C
D
Step 5: Removethetopdrawerfromthecabinet(seebelow).
Step 6: Assemble the Top Panel to the Assembly, using the Allen-Head
Bolts (D), Lock Washers (C) and Flat Washers (B). Tighten the Allen
Bolts using the Allen Wrench (E).Carefullyreinstallthedrawersby
aligningthechannelsofthedrawerslidesandgentlypushingthedrawers
backintothecabinet.
Step5
H
A
A
A
Step6
Unscrewtoadjust
theshelfheight
Unscrewtoadjust
thefilerod