Riverside Furniture Magnolia Hill 11915 User manual

Top Assembly
1 PC.
Riverside
FURNITURE
email: [email protected]
Made in Viet Nam
Page 1 of 2
Sofa Table
Item #11915
(A) (C)
(B) (D)
(F)
Side Frame
Left & Right
2 PCS.
Shelf
Magnolia Hill
Occasional Tables
Assembly Instructions
(E)
Center Legs
Front & Back
Bolt 5/16"
x 30mm
2 PCS.
8 PCS.
Bolt 1/4"
x 15mm
2 PCS.
Flat Washer
Ø5/16"
(G)
Spring washer
5/16"
Allen Wrench
(H)
(K)
8 PCS. 8 PCS.
1 PC.
(J) (L)
Flat Washer
Ø1/4"
(I)
Spring washer
1/4" 'L' Bracket
(K)(E)
(H)
(G)
(K)
(F)
(I)
(J)
(L)
(K)
(F)
(I)
(J)
(L)
DETAIL A
DETAIL B
DETAIL C
Component And Hardware List
ASSEMBLY PROCEDURE:
1. Remove the DRAWERS from the TOP ASSEMBLY and lay the TOP ASSEMBLY upside down on a soft and
smooth surface.
2. Assemble the SIDE FRAMES (C) to the TOP ASSEMBLY (A) by using BOLT (E) SPRING WASHER (H) &
FLAT WASHER (G) as shown in DETAIL A. Do not fully tighten BOLTS until Step 4.
3. Assemble SHELF (B) to the SIDE FRAMES by using 'L' BRACKET (L) BOLT (F) SPRING WASHER (J) &
FLAT WASHER (I) as shown in DETAIL C. Pull the SHELF snug to the SIDE FRAMES and tighten
BOLTS. Pull the SIDE FRAMES snug to the TOP ASSEMBLY and tighten BOLTS at the top of the SIDE
FRAMES.
4. Assemble CENTER LEGS FRONT & BACK (D) to the TOP ASSEMBLY (A) and SHELF by using 'L'
BRACKET (L), BOLT (F) SPRING WASHER (J) & FLAT WASHER (I) as shown in DETAIL B. Pull CENTER
LEGS and SHELF snug together and tighten with the ALLEN WRENCH.
5. Turn the completed TABLE upright.
6. Install the DRAWERS back into the table.
28 PCS.
28 PCS. 14 PCS.
28 PCS.
Be sure to check all packing material carefully for small parts, which
may have come loose inside the carton during shipment.Separate,count
andcheckallpartsagainsttheComponentsandHardwareListabove.
(M)
Anti-tip
restraint kit
1 PC.