Riverside Furniture Aberdeen Queen Bed User manual

8 pcs. 8 pcs.
8 pcs. 8 pcs. 8 pcs.
1 pc.
2 pcs.
F-A F-C F-D
Aberdeen
Queen Bed
Assembly Instructions
Made in Viet Nam
email: [e-mail]
FURNITURE
Riverside
8 pcs.
1 pc.
Page 1 of 4
8 pcs.
5/0 Wood Slat
60-7/8" long
4 pcs.
5/0 Queen Bed
24274 -- 4/6-5/0 Panel Headboard
24275 -- 5/0 Panel Footboard & Slats.
24272 -- 5/0-6/6 Bed Side Rails (for 5/0 Bed)

Page 2 of 4
ASSEMBLY STEPS :
1. Place the Headboard Panel (H-A) face down on a clean and soft surface.
2. Attach the Left and Right Headboard Posts (H-B) to the back of the Headboard Panel,
using the Flat Washers (H-G), Spring Washers (H-F) and Long Bolts (H-D). Do not fully
tighten until after next step. (See Detail A).
3. Attach the Headboard Stretcher (H-C) to the Headboard Posts using the same Washers
and Bolts (H-E) as in previous step. (See Detail B).
4. Tighten all Bolts using the Allen Wrench (H-I).
Made in Viet Nam
email: [e-mail]
FURNITURE
Riverside
H-B
H-B
H-C
Aberdeen
Queen Bed
Assembly Instructions
H-A
Detail: A
H-G
H-F
H-E
H-I

Page 3 of 4
Made in Viet Nam
email: [e-mail]
FURNITURE
Riverside
ASSEMBLY STEPS :
To prevent possible damage to furniture and personal injury, it is recommended that two people are used
to perform the following steps.
5. Install All-Thread Bolts (R-B) into the Headboard Posts and the Footboard.
6. Carefully position Bed Rail (R-A) onto the All-thread Bolts on the Headboard and the Footboard and
connect by using the Arc Washers (R-F), Flat Washers (R-E), Spring Washers (R-D), and Hex Nut (R-C).
Carefully align the Footboard and Headboard to be 'square' with the Side Rails. Tighten all Hex Nuts by
using Open Wrench (R-G). (See Detail C).
7. Attach the four Support Legs (F-C) to the bottom side of four Wood Slats (F-B). (See Detail D).
8. Position and attach the Slats to the Bed Rails using the Wood Screws (F-D). (See Detail E).
Aberdeen
Queen Bed
Assembly Instructions
Bed rail
R-G
Detail: C
Footboard
Bed rail
Headboard
Adjustable leveler

Riverside
email: [e-mail]
The Headboard may be used alone
with a Queen or Full Size
Metal Bed Frame
Page 4 of 4
24274
Queen Panel Headboard 5/0 Queen Bed
24274 -- 4/6-5/0 Panel Headboard
24275 -- 5/0 Panel Footboard & Slats.
24272 -- 5/0-6/6 Bed Side Rails (for 5/0 Bed)
#24272 QUEEN /
EASTERN KING RAILS
USE THESE HOLES FOR ATTACHING WOOD SIDE RAILS.
ALL HARDWARE IS INCLUDED WITH THE SIDE RAILS
USE THESE HOLES FOR ATTACHING A FULL SIZE (4/6)
METAL BED FRAME
CUSTOMER TO PROVIDE 5/16 X 1-1/2" LONG BOLTS, NUTS
& WASHERS TO CONNECT THE METAL BED FRAME
USE THESE HOLES FOR ATTACHING A QUEEN SIZE (5/0)
METAL BED FRAME
CUSTOMER TO PROVIDE 5/16 X 1-1/2" LONG BOLTS, NUTS
& WASHERS TO CONNECT THE METAL BED FRAME