Riverside Furniture Joelle 63054 User manual

Components and Hardware List (for one chair)
Made in Viet Nam
Page 1 of 2
Joelle
Dining Room
Assembly Instructions
Side Stretcher
#8 x 1-1/2"
Wood Screw
Steps:
1. Place the Back Assembly (A) on a soft and smooth surface.
2. Attach Chair Seat (B) to the Back Assembly (A) by using Bolt (F), Spring Washer (I) and Flat
Washer (J) into the back corners of the Seat, as shown in Detail 1. Using Bolt (G), Spring
Washer (I) and Flat Washer (J) into the middle of the Seat, as shown Detail 2. Do not fully
tighten Bolts until after next step.

Made in Viet Nam
Page 2 of 2
Joelle
Dining Room
Assembly Instructions
3: Assemble the Left and Right Front Legs (C) to the Chair Seat by using Bolt (H), and the same
washers as before as shown in Detail 3.
4: Install the Right & Left Side Stretchers (D) into the Back Assembly (A) and front legs (C) and
the Front Stretcher (E) between the Front Legs (C) as shown in Detail 4. Do not install wood
screws until step 5 has been completed.
5: Set the assembled Chair upright on a flat surface to level chair. Reach underneath the Seat
and tighten all Bolts using the Allen Wrench (K).
5: While pulling the Legs and Stretchers snugly together and using your Phillips Screwdriver,
install the Wood Screws (M) at each end of the Stretchers.