Riverside Furniture Mirabelle Dining Room User manual

Steps:
1. Place the Chair Back Assembly (A) on a soft and smooth surface such as a blanket or carpet.
2. Attach Chair Seat (B) to the Back Assembly by using the 3" long Bolt (E) Spring Washer (H) and
Flat Washer (I) into the back corners of the Seat and 1-3/4" long Bolt (F) Spring Washer (H) and
Flat Washer (I) into the middle of the Seat, as shown. Do not fully tighten any Bolts until Step 5.
#26258
Arm Chair Cane UPH
Riverside
Components and Hardware List
FURNITURE
Made in Viet Nam
Page 1 of 2
Mirabelle
Dining Room
Assembly Instructions

Riverside
FURNITURE
Made in Viet Nam
Page 2 of 2
3. Attach the Front Legs (D) to the Chair Seat (B) by using
the 2" long Bolts (G), Spring Washers (H) and Flat Washers
(I) as shown in Step 3.
4. Attach the Left and Right Arms (C) to the Chair Seat and
Back by using the 1-1/2" long Bolts (J) as shown in Step 4.
5. Turn the Chair upright on a flat surface to level chair and
tighten all Bolts using the Allen Wrenches (K & L). Press
the Wood Plugs (M) into the holes on the back side of the
Chair Back.
Mirabelle
Dining Room
Assembly Instructions