Riverside Furniture Vogue 46170 User manual

46170 4/6-5/0 UPHOLSTERED HEADBOARD
46180 6/0-6/6 UPHOLSTERED HEADBOARD
Made in Viet Nam
Page 1 of 3
1 pc.
Headboard Panel
1 pc. Left
1 pc. Right 1 pc.
6 pcs. 10 pcs.
Headboard Legs
10 pcs. 1 pc.
Vogue
Bed Room
Assembly Instructions
email: [email protected]
FURNITURE
Riverside
Ø5/16-18 × 2-1/4" Long
Allen-Head Bolt
Ø5/16" x 19 x 2mm
Flat Washer
Ø5/16" x 12 x 3mm
Spring Washer
5mm Allen Wrench
Hardware and Parts packed with the Headboard
H-A H-B H-C
H-D H-E H-F
H-G
Be sure to check all packing material carefully for small
parts, which may have come loose inside the carton
during shipment. To prevent possible scratches or damage,
this furniture should be assembled on a soft surface such as a
blanket or carpet.
Stretcher
ASSEMBLY STEPS:
1. Place the Headboard Panel (H-A) face down on the soft surface.
2. Attach the Left and Right Legs (H-B) to the back of the Headboard Panel using the 2-1/4" long
Allen-Head Bolts (H-D), Spring Washers (H-F) and Flat Washers (H-G). Do not fully tighten Bolts until
after next step.
3. Attach the Stretcher (H-C) to the Legs as shown using the 1-1/2" long Bolts and Washers as before.
4. Adjust parts for correct fit if necessary and tighten all Bolts using the Allen Wrench (H-H).
5. Carefully lean the back of the assembled Headboard against the wall where the bed will be used.
H-A
Detail: A
H-H
H-D
H-F
H-G
Detail: B
H-H
H-E
H-F
H-G
4 pcs.
Ø5/16-18 × 1-1/2" Long
Allen-Head Bolt
H-H
H-C
H-C
H-B
(left)
H-B
(right)

Riverside
email: [email protected]
Page 2 of 3
5/0 Queen Panel Bed
The Headboard may be used alone
with a Queen or Full Size
Metal Bed Frame
Vogue
Queen Headboard
Assembly Instructions
USE THESE HOLES FOR ATTACHING A QUEEN SIZE (5/0)
METAL BED FRAME
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CUSTOMER TO PROVIDE 5/16 X 3-1/2" LONG BOLTS, NUTS
& WASHERS TO CONNECT THE METAL BED FRAME
USE THESE HOLES FOR ATTACHING A FULL SIZE (4/6)
METAL BED FRAME
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CUSTOMER TO PROVIDE 5/16 X 1-1/2" LONG BOLTS, NUTS
& WASHERS TO CONNECT THE METAL BED FRAME
USE THESE HOLES FOR ATTACHING WOOD SIDE RAILS.
ALL HARDWARE IS INCLUDED WITH THE SIDE RAILS
#46172 QUEEN /
EASTERN KING RAILS

Page 3 of 3
Note: In order to install the Bed Slats, this rail must be
temporarily removed from both bed Rails, position
and attach the Bed Slats, then reattach this rail.
Riverside
email: [email protected]
Vogue
King Headboard
Assembly Instructions
The Headboard may be used alone with
an Eastern King or California King size
Metal Bed Frame
#46182 CALIFORNIA
KING RAILS
#46172 QUEEN /
EASTERN KING RAILS
USE THESE HOLES FOR ATTACHING AN EASTERN KING
SIZE (6/6) METAL BED FRAME
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CUSTOMER TO PROVIDE 5/16 X 3-1/2" LONG BOLTS, NUTS
& WASHERS TO CONNECT THE METAL BED FRAME
USE THESE HOLES FOR ATTACHING A CALIFORNIA
KING SIZE (6/0) METAL BED FRAME
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CUSTOMER TO PROVIDE 5/16 X 1-1/2" LONG BOLTS, NUTS
& WASHERS TO CONNECT THE METAL BED FRAME
USE THESE HOLES FOR ATTACHING WOOD SIDE RAILS.
ALL HARDWARE IS INCLUDED WITH THE SIDE RAILS