Rixen T-60 User manual

T-60 Digital Thermometer
Ⅰ. Introduction:
The T-60 Digital Thermometer accepts K thermocouple types and displays temperature in F and C. It offer widest temperature range,
highly accurate, high performance and rugged.
The T-60 Digital Thermometer has a variety of useful functions. Available for hold, stored MAX/MIN values, auto-ranging and
automatic/manual power shutoff.
The T-60 Digital Thermometer also features single point field calibration offset factory setting and power sources both of DC 9V
battery or AC adaptor.
Ⅱ. Features:
High Accuracy, Fast response.
Auto-Ranging with 0.1/1Resolution
Data-Hold function
Records MAX. MIN Values
Automatic / Manual power shut off function
Switchable units C / F
Wide measuring range: 200 ~ 1372C (Thermocouple Type K)
Self-diagnostics (Alarm): Low Battery, Open TCs, over range and internal hardware faults.
Rugged, drop-proof, dust-proof operating panel and case
Ⅲ. Symbol definition and button location:
Ⅳ. Specifications:
Input
Thermocouple Type K (CA)
Measurement Range
200 ~ 1372C (328 ~ 2501F)
Resolution
Auto-ranging 0.1Between 200 ~ 200C
1Above 200
Accuracy (at 23C)
0.1% rdg + 0.2C Between 200 ~
200C
0.2% rdg 1C Above 200C
Display
4-Digital LCD display
Power supply
9V 006P Battery, or AC Adaptor (Option)
Sampling rate
Approx. 0.3 sec/ reading
Dimensions
150 75 28 mm (L W D)
Battery life
Approx. 150 hours continuous
Sensor connector
Miniature connector for thermocouple
Weight
Approx. 150g (without battery)
Main Function
Auto / Manual power off, Auto-ranging, Data-Hold, C / F Switchable, Records MAX / MIN values, Low power
alarm, Thermocouple fault warns, Over range warns
※Appearance and specifications listed in this brochure are subject to change without notice.
LCD display
Data Hold button
Hold MAX. MIN. function
(. .+. .Manual-power off)
Power Switch
Switchable C/F
button
Offset calibration screw.
AC power adaptor connector

Ⅴ. Operation Instructions:
T-60 DIGITALTHERMOMETER
Please read before using instrument!
A. Power Switch:
Press the button turn the thermometer On or Off.
B. + Manual Power off:
Keep the key pressed and press the key turn on the meter, the meter will change to manual power off, the M indication
appears on the display, means the meter is under manual power off mode.
C. Auto power off:
Press turn on the meter, it is under auto power off mode. The meter automatically turns itself off after about 7 minutes if no key is
operated.
D. C / F Switchover
When the meter was first power on, the default scale setting is Celsius (C) scale. You can switch between C and F by pressing the
key.
E. Data Hold, MAX/MIN Value Operations:
If you need to temporarily lock in a reading while you record it. The measured values can be held in the display by pressing the
key, and a symbol HOLD will appear in the display.
Press again, the MAX symbol is on the display and the maximum value is shown on the display.
Press again, the MIN symbol is on the display, the show the minimum value on the display.
Operator may press to circulate the display mode among these options.
F. Low battery condition:
When the battery voltage is under proper operation requirement, the symbol “ “ will show on the LCD and the battery needs to
be replaced with new one.
Ⅵ. Precaution:
If operator would like to circumscribed power for long time measure record, please use the AC Adaptor. (This is chosen products,
please contact original company sales department).
Offset calibration screws offers temperature reparation or specialties calibration needed. Unless specialist please doesn’t random
adjust.
When meter show the “ “, please check the thermocouple if well or not. Or your measure range is out of this meter that can
accept the measure temperature.
Please don’t put the meter in high temperature, humid or shaky place.
If have any problem of using; please don’t repair or instead mounting by yourself.
Warranty: Within one year from the date of original purchase.