Robert Juliat ALEDIN 330LF CW User manual

330LF
Version V1 –16/05/11
DN41005100 V1.1
Robert Juliat S.A.S. Route de Beaumont, F60530 Fresnoy-en-Thelle - phone : [phone] - fax : [phone] - inf[email protected]
Robert Juliat U.S.A. 48 Capital Drive, Wallingford, CT 06492 –USA - phone : [phone] - fax : [phone] - [e-mail]
ALEDIN
Projecteurs de theatres
Single lens luminaires
330LF CW / 330LF WW
330CLF CW / 330CLF WW
Projecteur a LED type wash
Variable beam angle led wash light
Commandes manuelles / Commandes a perche
Manual / pole operated
Manuel / Manual

EN
Robert Juliat reserve the right to change
or alter any of the items detailed on this page,
to increase or improve manufacturing techniques without prior notice.
Summary :
1User’s instructions ........................................................................................................................................... 2
2Presentation .................................................................................................................................................... 3
2.1 330LF –Manual..................................................................................................................................... 3
2.2 330LF –Pole operated........................................................................................................................... 3
2.3 Identification plate.................................................................................................................................. 4
2.4 Accessories included ............................................................................................................................. 4
2.5 Optional accessories.............................................................................................................................. 5
3Set-up.............................................................................................................................................................. 6
3.1 Mechanics.............................................................................................................................................. 6
3.1.1 Operating positions............................................................................................................................ 6
3.1.2 Minimum distance between a flammable material and the lighting unit ............................................. 6
3.1.3 Operating conditions.......................................................................................................................... 6
3.1.4 Hanging ............................................................................................................................................. 6
3.1.5 Safety cable....................................................................................................................................... 7
3.2 Electrical ................................................................................................................................................ 7
3.2.1 LED source........................................................................................................................................ 7
3.2.2 Power ................................................................................................................................................ 7
3.2.3 DATA................................................................................................................................................. 8
3.3 Accessories............................................................................................................................................ 9
3.3.1 Gel frame........................................................................................................................................... 9
3.3.2 Barndoors........................................................................................................................................ 10
4Operation....................................................................................................................................................... 11
4.1 Light intensity....................................................................................................................................... 11
4.1.1 Range.............................................................................................................................................. 11
4.1.2 Control............................................................................................................................................. 11
4.1.3 Parameters...................................................................................................................................... 11
4.2 Strobe .................................................................................................................................................. 12
4.2.1 Range.............................................................................................................................................. 12
4.2.2 Control............................................................................................................................................. 12
4.2.3 Parameters...................................................................................................................................... 12
4.3 Beam size adjustment.......................................................................................................................... 12
4.3.1 Range.............................................................................................................................................. 12
4.3.2 Control - Manual.............................................................................................................................. 13
4.3.3 Control –Pole operated................................................................................................................... 13
4.4 Orientation ........................................................................................................................................... 14
4.4.1 Range.............................................................................................................................................. 14
4.4.2 Control - Manual.............................................................................................................................. 14
4.4.3 Control –Pole operated................................................................................................................... 14
4.5 Colour .................................................................................................................................................. 15
4.6 Beam shaping with barndoors option................................................................................................... 16
4.6.1 Range.............................................................................................................................................. 16
4.6.2 Control............................................................................................................................................. 16
4.7 Control board ....................................................................................................................................... 17
4.7.1 Display and Controls........................................................................................................................ 17
4.7.2 Menus and parameters.................................................................................................................... 17
4.7.3 DMX remote control......................................................................................................................... 19
4.7.4 Reset............................................................................................................................................... 19
5Service........................................................................................................................................................... 20
5.1 Preventative maintenance.................................................................................................................... 20
5.1.1 Frequency........................................................................................................................................ 20
5.1.2 General cleaning.............................................................................................................................. 20
5.1.3 General visual check ....................................................................................................................... 20
5.1.4 LED cleaning procedure .................................................................................................................. 20
5.1.5 Optical components......................................................................................................................... 20
5.2 Analysis................................................................................................................................................ 20
5.3 LED reaction according to LED temperature........................................................................................ 20
6Troubleshooting............................................................................................................................................. 21

EN
- 2 -
1 User’s instructions
GENERAL INSTRUCTIONS
1. Not for residential use.
2. These fixtures must only be serviced by a qualified technician.
3. In addition to the instructions indicated on this page, relevant health and safety requirements of the appropriate EU
Directives must be adhered to at all times.
4. This fixture is in compliance with section 17 - Lighting appliance for theatre stages, television, cinema and photograph
studios. Standards NF EN 60598-1 and NF EN 60598-2-17.
5. This fixture is rated as IP20, and is for indoor use only.
FIXTURE
6. Ensure fixture is correctly mounted on an appropriate support.
7. Protection screens and lenses must be replaced in the event of any damage, such as cracks or deep scratches, since
these might reduce performance.
8. When hung or flown the fixture must be secured by an additional hanging accessory (such as a safety cable or bond) of
suitable length.
9. Safety bonds or cables must be securely attached to the back of the fixture and be as short as possible, or rolled up as
necessary, to minimise travel distance should the fixture be dislodged.
10. Movable accessories (scroller, etc.) must also be secured with a suitable safety cable or bond at the front of the fixture.
11. The combined weight of both the fixture and the accessories must be considered when choosing the load-bearing
capability of safety cable or bond.
12. Do not open lighting fixture when the source is on.
13. WARNING: LED source become hot during use. Allow fixture to cool before servicing.
14. Do not tamper with design of fixture nor any of its safety features.
15. Tighten electrical mains cable connections regularly and replace with one of identical specification if damaged.
16. Use only with correct power supply.
VENTILATION
17. Keep well away from flammable material.
18. Not for outdoor use. Do not cover. Do not permit fixture to get wet.
19. To avoid overheating, do not obstruct air vents.
20. Ensure any cooling fans are in correct working order. If fans are not working, turn fixture off immediately and service as
necessary.
CLEANING
21. Do not touch LED source with fingers.
22. Clean all optical parts with alcohol-based cleaner.
23. Clean all filters regularly.
POWER SUPPLY
24. Disconnect from the mains before servicing.
25. Mains connection only. Do not connect to "electronic output" such as dimmer.
26. Not for outdoor use. Do not cover.
27. Ensure power supply circuit breakers, always remain accessible.
PLEASE NOTE
These products have been built to conform to European standards relating to professional lighting equipment. Any modification
made to our products will void the manufacturers' warranty.

EN
- 3 -
2 Presentation
2.1 330LF –Manual
Functions :
1. Hanging yoke
2. Tilt index
3. Focus index
4. Front focus adjustment
5. Accessories and colour filter runners
locking system
6. Accessories and colour filter runners
7. Tilt locking handle
8. Fresnel lens
9. Internal access
10. Identification plate
11. Safety cable attachement point
12. Control board
13. Handle
14. Data connectors (IN and OUT)
15. Power connectors (IN and OUT)
16. Rear focus adjustment
17. Front accessories safety cable attachment
point
2.2 330LF –Pole operated
Functions :
1. Hanging yoke
2. Focus adjustment
3. TILT adjustment
4. PAN adjustment
5. Focus index
6. Accessories and colour filter runners
locking system
7. Accessories and colour filter runners
8. Internal access
9. Fresnel lens
10. Front focus adjustment
11. Identification plate
12. Safety cable attachement point
13. Control board
14. Handle
15. Data connectors (IN and OUT)
16. Power connectors (IN and OUT)
17. Front accessories safety cable attachment
point

EN
- 4 -
2.3 Identification plate
Description :
1. MOD. : Model
2. VERS. : Version
3. U : Nominal voltage input (V)
4. I : Nominal intensity (A)
5. P : Maximum power input (W)
6. IP : International Protection Rating
7. t°a : Ambiant temperature (°C)
8. t°c : Maximum external temperature of the
unit (°C)
9. Net weight (Kg)
10. Minimum distance between a flammable
material and the lighting unit (m)
11. Colour temperature version :
11.a CW = Cool White
11.b WW = Warm White
12. Serial number
2.4 Accessories included
Reference
Description
1
FJUC000107
Power cord with CEE7/7 connector (Ref. 330LF WW / 330LF CW)
2
FJUC000108
UL/CSA power cord without connector (Ref. 330CLF WW / 330CLF CW)
3
PF1000C
215 x 215mm cardboard filter holder



1
2
3
5
7
6
8
4
9
12
11a
11b
10

EN
- 5 -
2.5 Optional accessories






Reference
Description
1
CF1000
4 Rotating leaves on a rotating barndoor (without safety cable)
2
PF1000M
215 x 215mm metal filter holder
3
G1000
215 x 215mm safety grid
4
876
40 x 10mm with 28mm screw clamp for Ø 35 to 50mm pipes
5
880
40 x 10mm with 28mm screw clamp for Ø 50 to 63mm pipes
6
CS2
Safety cable (length = 600mm)

EN
- 6 -
3 Set-up
3.1 Mechanics
3.1.1 Operating positions
3.1.2 Minimum distance between a flammable material and the lighting unit
3.1.3 Operating conditions
Minimum :
5°C
41°F
Maximum :
40°C
104°F
Indice de Protection international:
IP20 –Utilisation intérieure uniquement
3.1.4 Hanging
Ensure fixture is correctly mounted on an appropriate support.
The combined weight of both the fixture and the accessories must be considered when
choosing the load-bearing capability of safety cable or bond.
Manual
Net weight: 9.5Kg
Pole operated
Net weight: 12.4Kg
0.3 m

EN
- 7 -
3.1.5 Safety cable
When hung or flown the fixture must be
secured by an additional hanging
accessory (such as a safety bond or
cable) of suitable length.
The combined weight of both the fixture
and the accessories must be considered
when choosing the load-bearing capability
of safety cable or bond.
Safety cables or bonds must be securely
attached to the back of the fixture and be
as short as possible, or rolled up as
necessary, to minimise travel distance
should the fixture be dislodged.
3.2 Electrical
3.2.1 LED source
Never touch or scratch LED surface.
See 5.1.4 LED cleaning procedure if cleaning is necessary.
3.2.2 Power
Power supply
Voltage
Frequency
Input power
Connectors
90 264 V
50/60 Hz
0.5 amps @ 230V
0.9 amps @ 120V
1.4 amps @ 90V
105 W (Max.120 W)
Standby mode: 15 W
Neutric PowerCon®
Input: ref. NAC3MPA
Output: ref.NAC3MPB
Class 1 product. This luminaire must be earthed.
Must be connected directly to AC power. Do not connect to dimmer power
Automatic power detection
On the same breaker, maximum of: 14 units (230V) / 12 units (110V)
Daisy chain:
Maximum of:
14 units (230V)
12 units (110V)

EN
- 8 -
Power cable
Power cable
Connector
Mains
plug
Cable type
Cable
length
Wiring
1
Standard
version
Neutric
PowerCon®
NAC3FCA
CEE7/7
3G1.5
H07RNF
3 meters
Live: Brown
Neutral: Blue
W: Yellow/Green
2
North American
version
-
14AWG SJ
TYPE
(UL/CSA)
1.5 meter
Live: Black
Neutral: White
W: Green
Engagement
Separation
3.2.3 DATA
DATA
Protocol
Input connector
Output connector
USITT DMX 512-A
XLR 5-pin
XLR 5-pin
DATA connectors
PIN #
DMX
Description
1
W
Foil & Braided Shield
2
DMX (-)
1st conductor of 1st twisted pair
3
DMX (+)
2nd conductor of 1st twisted pair
4
Not used
1st conductor of 2nd twisted pair
5
Not used
2nd conductor of 2nd twisted pair
Daisy chain:
Maximum of:
32 units

EN
- 9 -
3.3 Accessories
3.3.1 Gel frame




EN
- 10 -
3.3.2 Barndoors
Movable accessories (barndoors, scroller, etc.) must also be secured with a suitable safety
cable or bond at the front of the fixture.




EN
- 11 -
0
50
100
150
200
250
050 100 150 200 250
Linear
square
4 Operation
4.1 Light intensity
4.1.1 Range
4.1.2 Control
4.1.3 Parameters
Resolution
3
:
Mode
Resolution
8 bits
255 steps
16 bits
65 535 steps
Response1:
Mode
Response
Slow
Fades between values
Fast
Snaps between values
Curve1: Linear / square
3
See 4.4.2 for mode selection
DMX512-A
Locally
DMX Console
Remotely with DMX512-A protocol
0 %
100 %

EN
- 12 -
4.2 Strobe
4.2.1 Range
4.2.2 Control
4.2.3 Parameters
Mode
Strobe
ON
1 DMX channel added
to control the function
OFF
Function not activated
4.3 Beam size adjustment
4.3.1 Range
100 %
1 Hz
27 Hz
DMX512-A
DMX Console
Remotely with DMX512-A protocol

EN
- 13 -
4.3.2 Control - Manual
4.3.3 Control –Pole operated
Colour
Function
Yellow
Focus

EN
- 14 -
4.4 Orientation
4.4.1 Range
Function
Range
Manual
Pole operated
PAN
0 360°
0 360°
TILT
0 360°
0 45°
4.4.2 Control - Manual
4.4.3 Control –Pole operated
Colour
Function
White
TILT
Blue
PAN

EN
- 15 -
4.5 Colour
One fixed colour
Any standard colour / effect filter gel
See 3.3.1 for installation
Size:

EN
- 16 -
4.6 Beam shaping with barndoors option
4.6.1 Range
4.6.2 Control
Examples:
Open
Triangle
Square
Line

EN
- 17 -
4.7 Control board
4.7.1 Display and Controls
4.7.2 Menus and parameters
4
A
d
d
r

1
DMX address
Value (-/+)
Function
1 –512*
DMX address

M
o
d
E

r
E
S
o
l
u

1
6
Dimmer channel resolution

Value (-/+)
Function
8
8 bits
16
16 bits
r
E
S
P
o
n

S
L
o
U
Dimmer response mode

Value (-/+)
Function
Slow
Fades between values
Fast
Snaps between values
S
t
r
o
b
E

o
F
F
Strobe function

Value (-/+)
Function
OFF
OFF - DMX channel inactive
ON
ON - DMX channel active
C
u
r
V
E

S
q
u
A
r
E
Dimming curve
Value (-/+)
Function
Square
Square dimming curve
Linear
Linear dimming curve

M
A
n
u
A
L

0
Dimmer level control (Display always ON)
Value (-/+)
Function
0 - 100
Light intensity from 0 to 100%
Value saved by pressing enter

P
E
r
S

F
a
n

L
o
Fan speed limit

Value (-/+)
Function
HIGH
Fan speed not limited
Lo
Fan speed limited
(noise reduction)
4
With default settings
Button
Function
MENU
Menu activation and/or go back
ENTER
Enter the current menu option and/or valid
UP
Scrolls through menus and/or increase data value
DOWN
Scrolls through menus and/or decrease data value
888888
DMX indicator

EN
- 18 -
n
o
d
M
X

H
o
L
d
Light intensity value if DMX not detected

Value (-/+)
Function
HOLD
Light intensity = last DMX value
OFF
Light intensity = 0
MAN
Light intensity = manual value
d
I
S
P

o
F
F
2
n
Display
Value (-/+)
Function
OFF 2m
Display = OFF after 2 minutes
ON
Display = always ON

t
o
o
L
S

U
E
r

1
_
1
_
0
1
Software version

t
E
M
P

0
0
0
C
°
LED temperature

d
M
X
I
n

X
X
X
Y
Y
Y
DMX values (Display always ON)

Value (-/+)
Function
XXX
DMX address
YYY
DMX value
r
E
S
E
t

C
o
n
F
I
r
Unit reset by pressing enter

t
S
t
F
A
n

0
Y
Y
Y
Fan test

Value (-/+)
Function
0 31
Fan speed (YYY = RPM)
t
S
t
d
S
P

8
8
8
8
8
8
Display test (all 7 segments = ON)

L
o
G

F
A
n

X
X
X
Maximum measured
speed of the fan (rpm)

E
E
P
r
o
M

0
F
F
For development use

L
E
D
U

X
X
X
X
U
LED voltage (volts)

P
S
u
U

X
X
X
X
U
PSU voltage (volts)

L
o
G
C
°

0
0
0
C
°
Maximum / minimum
temperature (°C)

o
n
t
I
M
E

X
X
X
Hour counter
(PSU = ON)

o
n
L
E
d

X
X
X
Hour counter
(LED = ON)

d
M
H
H
Z

X
X
X
DMX rate (Hz)

EN
- 19 -

d
M
H
C
H

X
X
X
Quantity of DMX
channels detected

d
M
H
b
r

X
X
X
DMX Break time (ms)
4.7.3 DMX remote control
8 bits mode*
Channel
Value
Percent
Function
Dimmer
1
0 - 255
0 - 100
Course dimming
* Resolution=8bits / strobe=OFF
8 bits with strobe mode*
Channel
Value
Percent
Function
Dimmer
1
0 - 255
0 - 100
Course dimming
Strobe
2
0
0
Open
1 - 255
1 - 100
Strobe slow to fast
* Resolution=8bits / strobe=ON
16 bits mode*
Channel
Value
Percent
Function
Dimmer
1
0 - 65535
0 - 100
Course dimming
2
Fine dimming
* Resolution=16bits / strobe=OFF
16 bits with strobe mode*
Channel
Value
Percent
Function
Dimmer
1
0 - 65535
0 - 100
Course dimming
2
Fine dimming
Strobe
3
0
0
Open
1 - 255
1 - 100
Strobe slow to fast
* Resolution=16bits / strobe=ON
4.7.4 Reset
Reset to default settings: Menu: tools reset confirm
or
Switch on the unit while holding Menu button on