Roberto Sport COLLEGE PRO COVER User manual

Roberto Sport srl
Via A. Casale 63/A (Zona Industriale), 10010 Lessolo, TO
ITALY
P.I. 05961970018
Tel. [phone] - Fax [phone]
[email protected] /www.robertosport.it /
COLLEGE PRO COVER
Thank you for choosing one of Roberto Sport’s products. Our tables are famous for their quality and accuracy of their
components. Roberto Sport has been producing table soccer, pool and hockey tables for more than 65 years. Huge
experience and tradition, constant research and innovation have brought Roberto Sport’s name as a synonymous of
the “Made In Italy” football tables all over the world.
GENERAL WARNINGS
Unpacking and assembly operation should be carried out entirely by adults. Keep children away throughout all steps.
All small parts such as bolts, screws etc., not yet assembled, and nylon bags might be swallowed or inhaled.
CARE & MAINTENANCE
The model you just bought is for INDOOR USE. For this reason we suggest you to install it in sheltered environment,
with low humidity degree and direct sun bean free.
In order to keep your tables performance at a high level, we suggest you clean it periodically by using a humid dust
cloth. For difficult stain you may use abrasive-free detergents. For an utmost sliding rods: we suggest you get the
external part of the rod lubricated (the one in touch with the bushing) along with the rod’s internal part by using a
silicon spray. Roberto Sport uses and supplies a special silicon spray studied, produced and tested for these
purposes. Do not use grease; it holds the dust and might block the rod sliding. The telescopic rods assembled on this
table are of a highly safe. To prevent rods bending, we recommend you do not load weight on the rods when
extended.
For any problem you might have, or any info you might need, do not hesitate to visit our web site:
www.robertosport.it or contact us at: [email protected]
WARRANTY
Roberto Sport has a two- year warranty for its products starting from the acquisition date. Warranty covers
manufacture defects only; it doesn’t cover damages caused by misuse or assigned to be due to wear & tear. A
manufacture defect must be reported at the earliest by a written communication within two months. A written
notification must be sent to the vendor. Roberto Sport is committed to restore the table with no charge on the buyer
by repairing or replacing the damaged part/parts or by offering a discount.

PARTS LIST
1
Lubricant spray
10
White ball
1
Scoring unit
Material for legs assembly
16
Rounded Screw 8x45
16
Metal flat 8x24
1
Allen Spanner Key - 5
Material for rods assembly
35
Screw 5x20
1
Set complete of rods
Material for aluminium border
7
Screw 4,5x16

ASSEMBLY INSTRUCTIONS
The football table is packed in a carton box with the rods and legs to be assembled. The assembly operation is very
simple and needs about 30 minutes. To start please follow the below instructions.
Please read and keep these instructions for future reference.
Legs assembly
Rods assembly
Aluminium border top
Insert the rods in the holes starting from the handles side
Set the bushing with the screw holes upwards
Fix the bushing with the 5x20mm screws
Assemble and fix all 4 legs with their metal flat
and screw (8x45 )
by using the Allen spanner key (5)

Aluminium border top
Metal part for ball exit and top cover assembly
Fix the coin conter with the
correspondant screws
Fix the aluminium edge with the
screws 4.5x16mm
(3 each side)