Roberto Sport COMPETITION User manual

Roberto Sport srl
Via A. Casale 63/A (Zona Industriale), 10010 Lessolo, TO
ITALY
P.I. 05961970018
Tel. [phone] - Fax [phone]
[email protected] /www.robertosport.it /
COMPETITION
Thank you for choosing one of Roberto Sport’s products. Our tables are famous for their quality and
accuracy of their components. Roberto Sport has been producing table soccer, pool and hockey tables for
more than 65 years. Huge experience and tradition, constant research and innovation have brought
Roberto Sport’s name as a synonymous of the “Made In Italy” football tables all over the world.
GENERAL WARNINGS
Unpacking and assembly operation should be carried out entirely by adults. Keep children away
throughout all steps. All small parts such as bolts, screws etc., not yet assembled, and nylon bags might be
swallowed or inhaled.
CARE & MAINTENANCE
The model you just bought is for INDOOR USE. For this reason we suggest you to install it in sheltered
environment, with low humidity degree and direct sun bean free.
In order to keep your tables performance at a high level, we suggest you clean it periodically by using a
humid dust cloth. For difficult stain you may use abrasive-free detergents. For an utmost sliding rods: we
suggest you get the external part of the rod lubricated (the one in touch with the bushing) along with the
rod’s internal part by using a silicon spray. Roberto Sport uses and supplies a special silicon spray studied,
produced and tested for these purposes. Do not use grease; it holds the dust and might block the rod
sliding. The telescopic rods assembled on this table are of a highly safe. To prevent rods bending, we
recommend you do not load weight on the rods when extended.
For any problem you might have, or any info you might need, do not hesitate to visit our web site:
www.robertosport.it or contact us at: [email protected]
WARRANTY
Roberto Sport has a two- year warranty for its products starting from the acquisition date. Warranty covers
manufacture defects only; it doesn’t cover damages caused by misuse or assigned to be due to wear &
tear. A manufacture defect must be reported at the earliest by a written communication within two
months. A written notification must be sent to the vendor. Roberto Sport is committed to restore the table
with no charge on the buyer by repairing or replacing the damaged part/parts or by offering a discount.

PARTS LIST
3
Lubricant spray
10
Balls
1
Scoring unit
Material for legs assembly
2
Iron crossbar
4
Iron legs
8
Locknut diam. 10mm
8
Metal flat 10x30
4
Screw 8x120 (for crossbar)
4
Plastic flat
4
Foot diam. 80
4
Metal flat 12x32
1
L allen spanner 6
Material for rods
35
Screw 5x20
1
Set complete of rods
Material for aluminium border top
7
Screw 4,5x16

ASSEMBLY INSTRUCTIONS
The football table is packed in a carton box with the rods and legs to be assembled. The assembly operation is very
simple and needs about 45 minutes. To start please follow the below instructions.
Please read and keep these instructions for future reference.
Legs assembly
Fixing the coin mechanism

Rods assembly
Fixing the aluminium
border top