Robotouch Elite Massage Chair User manual

Nams And
I
(i
4
5
Function Of Gomponents
r1
tL
lil
t4
15 16 17
3.Arm air bags assembly
4.Cell phone pocket
5.Legs frame
6.Foot frame
T.Upper arm air bags assembly
8.Back cushion
9.Armrest
10.LED blue light artistic effect
1 1 .Back cover
l2.Controller holder
1 3.Base caster
14.Power line and power plug
15.Power socket
'l6.Power switch
17.Fuse box
-
Function
function
Designed with a set of vertically movable, four-wheel driven muted massage
hands.
Programmed with five emulalion massage methods of kneading, flapping,
kneading and flapping, shiatsu, knocking.
Automatically scan and positioning of shoulder.
Automatic massage function (seven automatic massage of comfort, relaxed,
ache improving, fatigue recovory, full, neck and shoulder, waist)
Designed with four massage functions: whole body airbag, swing hip' back -
waist twist, and waist stretch.
Designed with three massago memory function.
Manual massage for the uppor body with three options overall, partial and fixed
massage, each with five levels of speed adjustable, in the state of fixed
massage, the massage hands can be moved up and down, in the state of
flapping, shiatsu and knockinl;, the width between the two kneading balls is
adjustable with three levels: wide, medium and narrow.
Air pressure massage for tho arms (8pcs builtin airbags), air pressure massage
for the upper arm (4pcs built-ln airbags)with three air pressure intensity options.
Air pressure massage for tho lower body: back air pressure massage (4pcs
built-in airbags).buftock air prossure massage (Spcs built-in airbags), calf air
pressure massage (32pcs bullt-in airbags), with three air pressure intensity
options.
Rotatable upper arms, suit for different height of people.
The sole designed with sole rolling function, with three levels of speed
adjustable.
The calf rest length can be atlJusted according to the user's height.
Calf rest and backrest can bo reclined and declined, lying mode can be adjusted
Automatically sit up and restore the massage hands when shut off the machine.
VFD display.
Armrest with LED light .
Elite Massage Chair
ELITE MASSAGE CHAIR

Method Of Usage Method Of Usage
l.Switch power supply on
@
.Diagramofplugin.Diagramoftheswitchpositionofpowersupply
2.Start to massage
. Press the red power button to start massage, the massage chair lie down
automatically
. Automatically detecting shoulder position and massage points, please wait till
detection finished.
. lt sounds [di di di...] after detection finished. Now; please adjust the shoulder
position by pressing up or down button. lt will run automatic massage if there is no
adjustment on shoulder position within 10 seconds.
Move the massage balls upward to a suitable position w
adutuent {Upperbu(on
Move the massage balls downward to a suitable position w
Shoulder pGltlon
adl$imenl {lwer butun
NOTE; this is for reference only, please lake practicality as standard
. Choose massage methods
. Memory massage
. When you are massaging, you can use A, B, C memory button at any time, press
one of the button, then will back to the stored massage models to massage.
iWl iWf iW] ""toMrzArroN M.DES sroRE

Method Of Usage
. TImlng cet
nRat6d time is 20 minutes. Max working time is 40 minutes. Every tlme press on
timing set button add to 5 more minutes. Working time up to 40 minules, press
on timing set button retum to 5 minutes" Follow by cycle.
the button repeatodly, choose different automatic massage mode, seven kinds of
automatic massage mode looped work.
. Specific massage
Method Of Usage
II
,n
lr
l
Manual functions
Kneading: massage manipulation, speed adjustable
Kneading and tapping: massage manipulation, speed
adjustable
Shiatsu: massage manipulation, speed and width
knocking: massage methods, speed and intensity are
adjustable.
Speed: with 5 levels available
Width: 5 levels available (in taping and kneading
massage mode)
eomfort massage: relax body physique
relax massage: promote blood circulation.
ache-improving massage: deep massage on point,
relieve muscle pain and stiffness.
fatigue recovery: improve the body fatigue, make body
active.
massage: automatic mas$age on the upper body
neck massage: mainly massage on neck and shoulder.
Waist massage: mainly massage on back and waist.
Full body airbags: shoulder, arm, waist, buttock, and
calf air pressure work at the same time.
Swing hip: mainly massage on buttock, air pressure on
seat cushion, make buttock left and right swing.
Back-waist twist: mainly massage on waist, the airbags
filling on the back can drive human waist swing left and
right, air pressure on seat cushion at the same time,
swing hip combined with the airbag on back.
Waist stretch: air pressure on calf, legs are clamped,
backrest is lying, leg stretch and then waist stretch,
then restore, repeat the action. seat cushion combined
with the massage hands.
Fixed position (fixed point) massage
Small area (partial) massage back and forth
Upper body (overall) back and forth
Descending key: in the condition of fixed and local massage , it can
make the massage hands move down to accurate location to massage
Ascending key: in the condition of fixed and parted massage , it can
make the massage hands move up to accurate location to massage
Note: back stretch ( except shoulder grasp, other manual modes are effective)
!

Method Of Usage
. Alr preuure massage
"t:"""1 m"ffff H',::xil['*Il:3: :ffi ?:fl 3lf[3:fL'l*$y mode or
. Other manual function
n
SOLE ROLLER Sole roller: sole roller switch, with 3 speed levels available a
J))
lvKJ
T!
SPEED 3peed: the speed of the sole rolling, three levels adjustable. ,uuu/
3.The angle of back rest and calf rest
oAutomatic lying rnode: four kinds of automatic lying
position, every time click on the button, it moves to a
lying angle. @1 - 04) Auto
Method Of Usage
4.Shut off power and finish massage
. Press red power button during massage to stop all massage functions immediately,
the backrest and footrest will return to original position automatically.After rated
working time, all massage functions will be finished but backrest and footrest won't
return to original position.
r After rated working time or switch off, the handle controller displayed "Memory Set On"
and glifter, and remind the users whether need to store the massage mode before turn
off, you can choose the memo function buttons A, B, C as your requirement, store the
massage mode. Press the red button again, the machine tum off, and the massage
hands will restore to the original position, or wait for 10 seconds, the machine turn off
automatically, and the massage restore to the original position.
Mamotygeton
Switch power off
Figure (Cut off the power of the machine)
. Power switch position method of cut off power
t;p ArmB: pross this button, the arm air pressure and upper arm air
progsure massage function on Arm utrltul
EStrength: arm air pressure strength has 3 levels adjustable Arm ut[/l//
aLinkage upward: press this button, the back rest lifting slowly, and the calf rest decline slowly at the same time, stop when release it.
IEi Linkage downward: press this button, th6 back rest decline slowly, and
the calf rest lifting slowty at the same time, stop when release it.
r
towli 60DY
Lower body: press this button and choose lower body air
prossure massage function (including lower body, back and
waist, calf)
Feet ut///l///
Back UUU
buttocks
U
INTENIITY
lntensity: air pressure massage intensity of lower body, back
and waist, calf. Three intensity available. t//t/t//
t//////////l
I
Back reet decline button: press this button, back rest decline slowly,
stop when release it.
10

Method Of Usage Method Of Usage
. Arm rest covered on the fixed steel board, then press the arrnrest make sure the
pin into the box on the fixed steel board, and pull it with your hand to check it is
fasten tightly.(figure 7)
. Find out the install hole on the front part ofthe fixed steel board, screw the screws
with hex wrench. (Figure 8)
. Find out the install hole on the behind part ofthe fixed steel board, screw the
screws with hex wrench, finish the installnation, the same installnation of the two
armrest. (figure 9)
Figure: hex head screw
fixed in front part of armrest
( Figure 8)
Figure: hex head screw
fixed in behind part of armrest
( Figure 9)
s.Am rest installation
. Find outthe airtube fitting and corresponding plug connectorfrom the bottom of
the seat frame and armreit, get through from the square hole on the fixed iron
plate. (Figure 1)
. Atter tfre-ptug cbnnector get through from the square hole on the fixed iron plate,
aligned to the corresponding connection plug. (Figure 2)
. Take the butt joint out from the bottom of the seat frame and plug into the
connector on ihe armrest, and the air tube fitting plug well too' (Figure 3)
. After finish the connecting of the plug, put it in the bottom of the seat frame
inrough the square hole dn the fixedlron plate, avoid to folding of the air tube.
. Make the male pin on the armrest corresponding to the female pin on the fixed
piai", m" outline of the iron plate corresponding to the concave outline of the
armrest. (Figure 5)
. HofOing the-armrelt and aligning the tw9 male pin.on the armrest on the female
pin on t"ne iron plate (Obserie wiether the connecting line was in the bottom of the
leat trame to avoid to get stuck), the whole armrest hitched on the fixed iron plate.
Fngure 1Flgure 2
( Figure 7)
Figure 3Figure 4
Figure 5
Figure 6

Method Of Usage
6.Handle controller frame installation
Handle controller traY
Screw
Frame
Handle controller
frame assemblY
. Ready for the handle controller tray, steel pole, take out the fixed screws on the
handle controller tray. (Figure 1)
. in""rt tfr" ball joint oi thelteel pole to the concave spherical of the handle controller
tray.(figure 2)
l,_)
nD@/
( Figure l)
. screw the screws in to the hole which got in step 1 and tighten it, take care the
direction, should be screw it from right to left. (Figure 3)
. Prepare ihe handle controller frame assembly in step 3'(figure 4)
( Figure 2)
( Figure 3) ( Figure 4)
Method Of Usage
. lnsert the handle controller frame assembly in to the cylindrical fixed pipe, be carefully
that the two groups hole out side and inside should be one to one correspond.(figureS)
. Prepare two screws which tighten on two sides (figure 6)
( Figure 5)
Screw the two screws on
( Figure 6)
two sides make it tighten, finish the installation( figure 7)
T.Controller installation and usage
lnsert the handle controller in to the frame (figure 1), the frame can turn left and rig ht
freely. (Figure 2) and the handle controller can swing freely in horizontal direction.
( Figure 7)

Method Of Usage
8.The disassemble and using of pillow pad and back cushion
You can weaken the kneading strength of the neck and shoulder by pillorrv pad, you
can use it according to your r:equirement (Advise you use it). Back cush'ron connect
*iif' 6"if UV zipper-1t y,-pittow pad connect with the back cushion by fastener (2)
10.Method Of Movement
Make sure that all wires are far above the ground, tilt the backrest backward to a
certain degree (with the gravity center resting on the wheels), push the chairloruvard
or backwaid wiih your hands and finally resume the chair to the normal position in a
slow and gentle manner.
Method Of Usage
Product Specification
I\
Dbscription: Fu't ir:dvAlr-maeeage Chalr
Conflgure:02
Rated Voltagc: 220-240V- t0Hr / GOHr
Ratod Powtr lnpul: 160W
Rrtcd Worklng Tlrne; 20Mlnutrl
gafcty Dcrlgnt Glfi: I
Materlal lntroduoiloni FVO, PA, lml prrb rnd rbelrlo lah
-ctron peft!
9.Floor Protection
Put the heavy massage chairs on the wood floor for a longtime may damage the floor,
so please place a carpet or other object to avoid this damage'
caution: Do not move the chairs with its wheels on wood floor, rough ground or in a
narrow space. Two people are required to lift the chair.
rrl
I €L€TH
l- ,orenrar- I
LI FU
Name: Elite Massage Chair